AutoCAD Inventor :: Insert Threads Into Hole At Assembly Level
Jan 11, 2013
I have an assembly that is made up of 3 unique parts ( 5 parts total). These parts and there features are to be laser cut, then assembled and welded along the outer perimeter in the small chamfer. I have designed the parts to have 5/16 holes, which will be later tapped to 3/8"-16 UNC after assembly.
Once these parts are assembled, I don't understand how I can change the holes to reflect this. Meaning I want the parts to be pre-drilled(laser cut) with 5/16 holes, but I want the assembly to then have 3/8-16UNC holes.
The hole command will not let me select the existing hole features in the assembly and add threads. What is the consequence of inserting a 'new' hole with 3/8-16UNC threads over the existing 5/16" holes in the assembly?
Is my workflow incorrect? should I have the parts modeled with the tapped holes and just make a note on the drawing to not tap these holes until assembly? how does that affect the laser cutting?
View 9 Replies
ADVERTISEMENT
Sep 3, 2013
In order to reflect production process, I have to create holes on the bent pipe at assembly level after 2 bent pipes are welded to the straight pipe. Now when I suppress holes, it does not suppress only at LOD or view rep but throught the whole assembly.
Is it possible to suppress features such as hole using LOD or view rep, which are made at the assembly level? or I have to use another method? See below in highlighted.
View 1 Replies
View Related
Oct 29, 2011
My part does everything I want with threads but the other option I need to program is a straight hole with no threads. I assume I can do this with Param for the existing hole but not sure what it would be called? Is there a list or method of determining what these parameters are called so I'll be able to find them in the future?
View 1 Replies
View Related
Nov 7, 2012
How to use sweep to successfully put threads in a hole. Attached is the drawing with a helical coil and an object in two different orientations (A and B). To the right of that, you can see the path they took for each. The object rotated from the original position before following the path. Tried changing the position of the object to sweep, but either it sweeps it 180 degrees from what it is already doing (still wrong) or the program says it is invalid and won't do anything till I put it back in the original rotational position and try again.
View 9 Replies
View Related
Aug 9, 2011
I have to create a workplane and then define the section.
Usually the sectioning is done w.r.t flat surface/s and then the section plane can be offset depending upon our requirement and placement in the assembly. I am not getting this offset option when I want a Sectioned View. The section takes where I click on the flat face straight.
View 5 Replies
View Related
May 21, 2012
I have a sub assembly with frame members and have used different colors for different sizes. In the top level assembly all the colors are lost, presumably because it defaults back to material color. Is there a way to get the frame member colors to display and all assembly levels?
View 1 Replies
View Related
Jun 20, 2013
I am using IV 2010. I have an assembly that is made up of subassemblies and individual parts. Some of the subassemblies share the same parts. I would like to know when I create the BOM for the top level assembly if it can show parts only with no assemblies. I want to get the BOM to combine like parts from all subassemblies in one list. I have tried to use the part only option and it still puts subassemblies in the BOM and breaks the parts out per subassembly.
View 1 Replies
View Related
Jan 9, 2014
When ballooning an assembly drawing having a structured/all levels BoM, the balloons default to the part level of the BoM hierarchy. Is there a way to have the balloons reference the part's subassembly (direct parent) without having to override the value of each balloon manually?
View 7 Replies
View Related
May 26, 2013
Im new in Inventor and I have a problem with creating a hole through two parts beacause they are a bit angled. Im creating the holes part by part and Im using the work point method. But unfortunately this is the result:
Im wondering if there is any other methods so I can get the holes coinciding?
View 1 Replies
View Related
Apr 9, 2012
We've got a sketched symbol that locates to the center of holes on a part.Problem is, the symbol either doesn't recognize the hole's center and even if it does, the center of the symbol (the designated insertion point) jumps to the edge of the hole.I've even recreated the symbol and I get the same effect.
View 9 Replies
View Related
Mar 25, 2013
I have a rule that turns off all work geometry and sketches of an assembly and all referenced parts and assemblies.
This rule is almost perfect.
When i run the rule. All sketches and work geometry are turned off. But sketches in sub assemblies remain visible in the top assembly. When i open the document of the sub assembly the sketches are off.
So what I see is a top assembly 'override' of sketch visibility inside sub assemblies
How can I turn off visibility of a sketch on a level higher?
View 9 Replies
View Related
Jul 6, 2012
Currently I have some code which loops through all sub components of an assembly and sub assemblies. However I only need sub components inside the top level assembly and not any sub-assemblies. Is there an easy way to acomplish this?
This code will list all sub components inside an assembly when a drawing is open.
Dim oDocument As Document Set oDocument = ThisApplication.ActiveDocument Dim oRefDocs As DocumentsEnumerator Set oRefDocs = oDocument.AllReferencedDocuments
Dim oRefDoc As Document
For Each oRefDoc In oRefDocs debug.print oRefDoc.FullDocumentName Next
View 7 Replies
View Related
Jan 6, 2012
I just want to notice the Autodesk guys that when editing a hole feature in an assembly, then the sketch is hidden so that is not possible to pick more centerpoints. I noticed this when working with a sheet metal part, I don't know if its the same with a regular part.
Inventor 2012 SP1 / 64 bit
View 4 Replies
View Related
Dec 17, 2013
I have made an iAssembly with a main body and flanges attached to the body.
Assembly feature holes have been created act on the main body, and these holes are relative to the position of the flange.
When I change the factory member - the position of the flange changes, but the holes stay in the last location and so the model is wrong.
The only way to overcome this error, is if I go to the Manage tab and manually select 'Rebuild All'.
I need this to work automatically as drawings are generated wrong when changing model state.
My intention is that this will be used in an iLogic routine, linked to an external sales package.
View 4 Replies
View Related
Feb 22, 2012
I am trying to link a hole feature in a part in an assembly with the number of a particular feature in another part within the assembly. I have a base plate part with a coutersunk hole feature that I want to pattern by linking it to the number of bosses in another part within the same assembly.
View 6 Replies
View Related
May 19, 2011
I would love for the day that ADSK allows users to assign materials to faces and surfaces at the assembly level. I know this can be done at the part level but this practice has it's flaws when trying to have an accurate BOM and Parts List as well as other "issues" when using that method.
Take a plated part for example. At my company our structure of a plated part would look something like this:
raw material - machined part - plated part. I'm sure it;s the same at many other manufacturing companies.
Typically we will have a material spec sheet for the raw material. We will have an IPT and INV dwg of the machined part file. We then place the machine part (IPT) into an IAM to become the plated part. We do this workflow because if we chance any geometry to the child (machined part) it will update and reflect a tthe parent IAM level (plated part). This also keeps out parts list and BOM structure in-line with our MRP system. So this workflow works great for us.
However there is an issue doing it that way. Inventor doesn't allow to assign materials to faces at the assembly level which seems just wrong to me. I kind of understand why they did that but it sure would be nice to be able to assign materials to faces in IAM files. Yes I know I could acheive this by using Derived Component but then my parts list and BOM structure does not reflect the base part. It only reflects the Derived part in my Parts List. Is there a way I'm missing to alter or change the Parts List to pull info of title, part number, etc of the base part rather than the Derived?
Ideally I'd just love for one day INV to allow material assignment to faces and surfaces in the assembly level. It looks rather strange on our drawings where we do a section view of the top l;evel assembly and see parts that are technically made of brass but look to be made of chrome or zinc plating instead because of how we had to assign material to the entire body of the component at the assembly level.
View 9 Replies
View Related
Dec 11, 2012
How do you save features added in an assembly to the part? For example, if I add a hole in an assembly, presently I cannot see it when I open the part. It seems like a very basic function, I'm not sure why it doesn't do it automatically.
View 6 Replies
View Related
Dec 13, 2011
I'm trying to use the Level of Detail function to add a hole feature in a sub assembly that will be used in 2 places inside the main assembly, but the sub assembly is present in many other location and does not need this hole. My thought is to have the master level of detail depict the hole feature and have another level of detail with this hole suppressed.I can't get the two levels of detail to save the desired outcome. When I switch LODs, the hole feature will not suppress or unsuppress as desired. Is this possible or am I doing something wrong.
View 3 Replies
View Related
Nov 19, 2012
How can i use a level of detail from sub assembly in the main assembly?
View 2 Replies
View Related
Sep 25, 2011
The model I have been working on has been trying to change it's colour all day. Finally I had a crash 'graphics adapter stopped working' and when I re-opened the model it had gone all blue. The top level assembly is all blue but the subassemblies are the proper colours when you open them.
I'm updating my graphics driver which should maybe stop the problem re-ocurring but in the meantime I need to get my top level assembly to display as per the colours in the sub assemblies.
View 1 Replies
View Related
May 28, 2013
at assembly level hole feature shown only in assembly. how to create same feature at same position on parts.
View 5 Replies
View Related
Oct 7, 2011
I am fairly new to Inventor and have recently just finished drawing up a machine made of many parts and sub assemblies and then made into one master assembly. Due to the nature of some hole positions i decided to draw some holes directly on the Master assembly thinking it would then change the original sub assembly/part file. Apparently not as i found out making technical drawings.
How i can rectify this so i dont have to re-draw all the holes on part level and keep my constraints in place?
View 1 Replies
View Related
Apr 8, 2013
I have a frame fabrication / assembly with a Custom iProperty called "FINISHED MATERIAL SIZE". I have set the following parameter for this property:
FINISHED MATERIAL SIZE = <Stock Number> x <G_L>mm
This returns the stock size and length to my drawing cutlist. The problem is that the <G_L> Parameter returns the trailing zeros and unit string.
I would like to set all the frame members in the assembly such that the G_L parameter returns a value rounded off to 0 decimal places with no trailing zeros and removes the unit string as well.
Is there a way I can achieve this from the assembly so I don't have to manually open each frame member and make the changes in the fx parameters dialog one at a time?
View 3 Replies
View Related
Jun 27, 2012
How to find the cross section details like area and movement of inertia at particular cross section
in( solid works there is a direct option select the section and select the face and click on the calculate automatically gives the are and movement of inertia etc in part and sassy level also) but in inventor in part level its possible but in an assembly level.
View 7 Replies
View Related
Jan 23, 2012
When holes are put in at the assembly level by using the 2d sketch command, projecting geometry and then using the hole command in the Model tab works great. Is there a way to transfer the holes put in at the assembly level to the detail drawings (ipt)?
View 4 Replies
View Related
Oct 24, 2012
I am using this code placed in the .ipt file to change Sheet Metal material
If Material_SM=1 TheniProperties.Material="Steel"SheetMetal.SetActiveStyle("RB_Mild Steel")ElseiProperties.Material="AISI316"SheetMetal.SetActiveStyle("RB_Stainless")End If
It works fine presuming code placed in every .ipt file to be ruled.
Is it possible to modify code in a way so when it placed in top assebly it runs through entire assembly finds all Sheet Metal parts and applys Material prpperties/Sheet metal style according Material_SM parameter.
Inventor 2013 SP2
Windows 7, 64 bits
RAM 18GB
Core TM2 Duo CPU 2,99 Gz
View 3 Replies
View Related
May 14, 2012
I need converting imperial dimensions into metric in assembly as weell as part level sketches dimensions.
Any solution for converting all imperial dimensions to metric dimensions in whole assembly constraint level and as well as part level sketch dimensions. Any macros or any ilogic rules?
View 1 Replies
View Related
Jan 2, 2014
Is there a way to insert a part that would be grounded or flush constrained on one or two planes only (automatically) and not all three? For example; you'd insert the part and you'd pick the two planes that you want to be flush constrained but the 3rd plane you'd constrain yourself.
View 2 Replies
View Related
Oct 29, 2013
I am trying to insert a revolution joint into my assembly but it seems it does not exist. I have attached two screenshots. One is from a tutorial I am going through which contains a longer list of available joints. (More.png) The other is the assembly I am working on which contains less available joints. (Less.png)
View 1 Replies
View Related
Jun 8, 2012
I get the following error when I try to insert screws into a new assembly:
Unable to successfully update the member part file. Problem occurred when setting thread data.
I click OK and the part inserts but the thread does not look right! Compare the threads on the screws on the left (shown incorrect) with those on the right!
Using Inventor 2013.
View 4 Replies
View Related
Feb 1, 2013
I have an Inventor drawing which contains multiple sheets. One of the sheets is a drawing of the master assembly. Another sheet is a drawing of a part that is in the master assembly. This part shows up multiple times. I'd like to have a text box or something in the part's drawing that I can put: "Quantity: [Quantity]" where [Quantity] is the number of occurances of the part in the master assembly. I've been searching for a while and can't find a way to do this.
View 4 Replies
View Related
