I get the following error when I try to insert screws into a new assembly:
Unable to successfully update the member part file. Problem occurred when setting thread data.
I click OK and the part inserts but the thread does not look right! Compare the threads on the screws on the left (shown incorrect) with those on the right!
Using Inventor 2013.
Is there a way to insert a part that would be grounded or flush constrained on one or two planes only (automatically) and not all three? For example; you'd insert the part and you'd pick the two planes that you want to be flush constrained but the 3rd plane you'd constrain yourself.
View 2 Replies View RelatedI am trying to insert a revolution joint into my assembly but it seems it does not exist. I have attached two screenshots. One is from a tutorial I am going through which contains a longer list of available joints. (More.png) The other is the assembly I am working on which contains less available joints. (Less.png)
View 1 Replies View RelatedI have an Inventor drawing which contains multiple sheets. One of the sheets is a drawing of the master assembly. Another sheet is a drawing of a part that is in the master assembly. This part shows up multiple times. I'd like to have a text box or something in the part's drawing that I can put: "Quantity: [Quantity]" where [Quantity] is the number of occurances of the part in the master assembly. I've been searching for a while and can't find a way to do this.
View 4 Replies View RelatedI have an assembly that is made up of 3 unique parts ( 5 parts total). These parts and there features are to be laser cut, then assembled and welded along the outer perimeter in the small chamfer. I have designed the parts to have 5/16 holes, which will be later tapped to 3/8"-16 UNC after assembly.
Once these parts are assembled, I don't understand how I can change the holes to reflect this. Meaning I want the parts to be pre-drilled(laser cut) with 5/16 holes, but I want the assembly to then have 3/8-16UNC holes.
The hole command will not let me select the existing hole features in the assembly and add threads. What is the consequence of inserting a 'new' hole with 3/8-16UNC threads over the existing 5/16" holes in the assembly?
Is my workflow incorrect? should I have the parts modeled with the tapped holes and just make a note on the drawing to not tap these holes until assembly? how does that affect the laser cutting?
I want to make an assemby consisting of 3 parts. A crank shaft and a crank pin that screw into threaded holes in a crank disk. How can I insert them and prevent them rotating in their holes but still allow the whole assembly to rotate around the axis of the shaft? Also how could I lock a flywheel on to the shaft so that whole assembly can rotate togeather?
View 1 Replies View RelatedI would like to know, whether is there is any ilogic option by which the Custom content center is triggered automatically to insert component in an assembly.
View 7 Replies View RelatedHow or where can I get in ipt - files of DIN 7504-K screws?
View 1 Replies View RelatedI created an assembly with screws and nuts which are not from content center. When creating a section view on Drawing, screws and nuts are also sectioned, but I don't want to.
Is it possible to see entire screws and nuts in a section view?
I'm modeling a band that will be screwed onto the inside of a sheet metal cylinder. The band will be rolled to the ID of the cylinder. I'm trying to model the holes in the band, and place screws into the holes. I'm not sure yet how the holes will be machined out in the shop--whether they'll be drilled or punched, made before or after the band is rolled, placed based upon degree or arc length, etc.
1. Is there a better way to model the band and its holes?
2. How can I properly and easily insert the bolt into the holes since they're no longer "perfect holes" that can be used in an "Insert" constraint.
3. How can I then pattern the bolt so I don't have to insert one into each hole?
I am attempting to find wood screws for use in one of the assemblies I am working on.
I have logged onto the Content Center as one possible resource. Is there any kind of search engine to look for parts? I can't imagine having to go through each manufacturer looking for something particlular like fasteners.
Besides Content Center, any resource for wood screws. I have looked in Grainger, McMaster Carr, PartSpec... and others. All with no success.
Why is it, when I go to Flat Pattern/export to DXF that everything ends up upside down.I have part where it is important that the correct side is faced upp, (brusched steel).
When i Export it to dxf, it is upside down, and the bruched facefacing down.
When i tried to transfer assembly from inventor to showcase by the suite workflows this error displayed
"AdWorkflowHost is unknown.Please check your synhub config file"
I can easy open this assembly in showcase but workflow doesn't work.
When I suppress a part or a sub-assembly in Inventor 2013 and then right click on the suppressed item in the browser window I always get an cadabundus error message (see attachment), after I press OK I get the normal right click menu hovering over the item.
I have Inventor 2013 RTM 64 bit Build 138, and running on Vista 64bit.
I have an assembly that was created on 64 bit version of Inventor 2013, the total file size of everything is around 150MB. Even if I use 'Pack and Go' to move the file to another computer running the 32 bit version I get an error when I try to open it which says something like:
'unable to allocate 3GB memory for FBAttributeSegment'
The actually figure is over 3GB but of course on a 32 bit version of windows it is physically impossible to allocate that amount of memory (even with the /3GB in boot.ini hack)
I've performed various dynamic simulations as well as animations within the assembly so I'm thinking that perhaps its trying to allocate that huge amount of memory for a saved state of one of those.
What FBAtributeSegment might be and whether there is any special way to save an assembly to avoid this problem? The name FBAttributeSegment doesn't correspond to any part or assembly names.
I should also add that I have no problem opening it in a 32 bit version of Fusion which again suggests to me that it is something like simulation or animation that is causing this
There is a line (and two big dots) representing EVERY Assembly insert. And I've been trying to figure out how to hide them.
May be they were there because of some link/point code. But I was unable to find and thing.
In the attached screen shot (taken from a print preview), I've circled one of these dots and pointed at one of the lines. I need to get rid of these.
I am using INV 2012 and I wan to to know a trick how to convert the weldment assembly back to regular assembly template.
View 1 Replies View RelatedI'm looking for the best way to create a separate assembly out of various component parts in an existing assembly so that the whole thing can be placed in an assembly as you would a part, I know it's possible to demote components within an assembly but are there any other methods similar / better ?
View 2 Replies View RelatedWe have an iLogic assembly with to parts in it. Maybe to cylindrical parts. The iLogic rules should do the following.
1. Start a Rule after open document.
2. This Rule starts a Rule in the first cylindrical component.
3. This Rule ask the user for a diameter.
4. The assembly gives this new parameter value to the second component
5. Then the assembly calls another rule in the second component to change it with the new parameter
Everything is working fine when the following combinations are taking place:
1. I open up the assembly out of vault or from a local drive or an accessible server drive
2. I insert the assembly as sub assembly in another assembly from a local drive or an accessible server drive
It don't work with the following situation:
- I insert the assembly as sub assembly in another assembly out of vault
Then the user becomes the dialog "Choose a diameter" twice.
I don't know why, but I have the idea it has something to do with the functionality of inventor to insert a component more than once. If you insert a component in an assembly Inventor gives you the opportunity to add more than one occurence after each other.
change that behaviour? Maybe a switch to change that inventor "add more than one occurence" behaviour.
I have encountered a problem with the Tube and Pipe styles.
As you can see, I have a rack assembly with a custom tube and pipe style. A wire as a tube in orange, and a tube support in white. Both have their seperate colorations at a style in the tube and pipe styles editor
When placing the rack assembly into the main assembly, it reverts to the coppor coloration I changed from the original style.
Steps I've taken:
Exported the styles .xml and Imported the styles into the master tubeandpipe.iam
Imported the user created .xml styles into the main assembly file nothing seems to work
I am trying to find the interior volume of an assembly (when am I not?!?!) by subtracting the assembly from a block that surrounds the most of it. Somewhere the assembly has a "leak" and I have been trying to use the Cross Section Analysis to track down where the inside lump is connected to the outside lump to be subtracted. Is there a less time consuming way to dynamically drag a plane across and get cross sectional views?
Even better is there a simple way to animate the analysis plane moving across the block so I can hopefully just watch and pause it when I find a leak?
Inventor 2013 (SP2 Update 2), Windows 7 Professional (64-bit), SP1, Intel Xeon 3.07GHz CPU, 12GB RAM, NVIDIA Quadro 2000, Vault Basic 2013
it is possible to make a constraint that utilized a parameter of a part within the assembly.
For example, if I wanted to use the thickness of a plate, which I defined in the part, could I call that parameter in a constraint?
My assembly has grown (about 50 parts) to where I need to consolodate some parts into subassemblies for reuse and alternate iterations of the basic design.
When I import the original parts into a new assembly, all of the constrains I created are not there of course.
I've tried creating a new empty part and then deriving a new part from the assembly, but I can't add, delete or edit any parts.
I looked at using Shrinkwrap, Substitutes, iParts, Multi-body Parts, and Multiple Solids but I remain confused.
In retrospect, maybe I should have created the subassemblies between the part and assembly stage but I didn't.
I want to be able to control the location/position of a component in an assembly. This is easy enough through the iProperties/Occurrence tab and then adjust the location of the X,Y, and Z offsets. Is this possible using iLogic? I have been unable to find a function to access via iLogic. Ultimately I am trying to translate a component about an axis not a pattern.
View 1 Replies View Related1. Is it possible to bring some text to the curser with c# (like with the command distance), which will stay there till the cursor moves?
2. Is it possible to insert an error-symbol at the cursor like it does the editor if you input the wrong thing?
I have the following code that Inserts a Block with Attributes by using an empty database and
ReadDwgFile. But I seem to be missing something because it has caused memory errors that lead to Exception Errors in Autocad, which then bombs out. Is there something in addition to the db.CloseInput(true) and db.Dispose() that I need to fully release the unseen instance of Autocad?
<Autodesk.AutoCAD.Runtime.
CommandMethod("InsertDetailCallOut", CommandFlags.Session)> _
PublicSharedSub InsertDetailCallOut(ByVal BlockPath AsString, ByVal thePoint AsPoint3d, ByVal BlockName AsString, ByVal dblscale AsDouble, _
ByVal Detail_Number AsInteger, ByVal Detail_Name AsString, ByVal Detail_Qty AsInteger, _
ByVal Detail_Material AsString, ByVal Detail_Stock AsString, ByVal Detail_Notes AsString)
[code].........
Can I select a bunch of parts in an assembly and say "save these pieces as a new assembly"?
It is just such a needed tool but I cant find an easy way to accomplish this.
I have a two part duct fire damper assembly. The IDW has the combined two part assembly, which I know how to turn the CoG on, so that it can be dimensioned. The problem is each piece will more than likely be hoisted separately so I would like to show the CoG for each piece, not the combined master assy.is there a way to do this?
Inventor 2014
Windows 7 Pro SP1
Intel(R) Core(TM) i7-3770k CPU @ 3.50GHz
16GB RAM
NVIDIA Quadro 4000
3D Connexion SpaceMouse Pro
I would like to see if there is a routine that allows my iLogic code to detect if my assembly contains another assembly within it. If my assebly contains assemblies then I don't want "MyRule" to run. Else if it does then I want "MyRule" to run.
View 4 Replies View RelatedMy Assembly has two possible positions for my piston.
I would like to show both piston positions (top and bottom) in one drawing file; however, in different drawing views.
I have tried using LOD and Drawing View Representations, but it is my understanding that neither of these are meant to be used in this way.
I have students working on the assignment below. They want both the Imperial and Metric screws to be drawn. Is there a way to draw both on drawing? When we change our units to metric when we draw our 14mm line it is still drawing it 14" long.
[URL] ....