AutoCAD Inventor :: Insert Number Of Occurrences In Parent Assembly
Feb 1, 2013
I have an Inventor drawing which contains multiple sheets. One of the sheets is a drawing of the master assembly. Another sheet is a drawing of a part that is in the master assembly. This part shows up multiple times. I'd like to have a text box or something in the part's drawing that I can put: "Quantity: [Quantity]" where [Quantity] is the number of occurances of the part in the master assembly. I've been searching for a while and can't find a way to do this.
View 4 Replies
ADVERTISEMENT
Sep 30, 2013
I'm using FindUsingPoint to find Assembly Occurrences
Inventor.SelectionFilterEnum[] filter;filter = new Inventor.SelectionFilterEnum[1] { Inventor.SelectionFilterEnum.kAssemblyOccurrenceFilter };Inventor.AssemblyDocument activeEditAsmDoc;activeEditAsmDoc = (Inventor.AssemblyDocument)inventorapp.ActiveEditDocument;
Inventor.AssemblyComponentDefinition oAsmDef;oAsmDef = activeEditAsmDoc.ComponentDefinition;Inventor.ObjectsEnumerator istDaWas;istDaWas = oAsmDef.FindUsingPoint(oBias2, ref filter, suchRadius, false);
Works fine within a top level Assembly (ActiveDocument == ActiveEditDocument).
While in-place editing a sub assembly calling this code FindUsingPoint throws an "ArgumentException".
(oBias2 and suchRadius are tested)
View 2 Replies
View Related
Nov 9, 2011
I want to be able to control the location/position of a component in an assembly. This is easy enough through the iProperties/Occurrence tab and then adjust the location of the X,Y, and Z offsets. Is this possible using iLogic? I have been unable to find a function to access via iLogic. Ultimately I am trying to translate a component about an axis not a pattern.
View 1 Replies
View Related
Oct 3, 2012
Is there a way to run a rule which is part of a sub assembly from the parent assembly?
I have a parent skeleton assembly containing many icopy assemblies. These subassemblies are based of one master assembly which in turn has a common part. (hence why I am using the icopy feature)
This standard part has an ilogic rule which varries the number of creases in a wall panel. eg. when the panel is 1200 wide there are 2 creases, when the panel is under 800 wide there is one crease and when the panel is less than 600 wide then there are no creases.
When I insert the icopy assembly into the master skeleton assembly and click select the widths of the panels they stretch and change to suit my skeleton. However I am having to visit each copied panel to run the crease rule.
Is there an operation or some sort of trigger I can implement to make this rule run as soon as the sub assembly is inserted?
Inventor 2010 Pro SP4, Vault Collaboration 2010
HP Z820 Xeon E5-2643 0 @ 3.3Ghz 16.0GB RAM
Nvidia Quadro 5000
View 9 Replies
View Related
Jan 7, 2014
I create an IDW view of a subassembly by inserting the parent assembly, make it a non-associative view, then turn off visibility of unwanted subassemblies. When later working in the model and adding a part to one of the non-visable sub-assemblies, that part becomes visable in the IDW views in which the subassembly was non-visable, requiting me to edit all veiws in which the subassembly was non-visible. This can be quite a number of instances. Is there a way to prevent this?
I may have a more fundamental workflow problem: I create assemblies composed of subassemblies that need to be detailed sperately. I have found that in order to correctly create a structured BOM and to have the ballon lables to correspond to the structured BOM, I create the drawing views as described above. If I would just insert the subassembly to detail it, I don't understand how to get it to relate the balloon labels in the subassembly view to my master BOM.
View 6 Replies
View Related
Jan 2, 2014
Is there a way to insert a part that would be grounded or flush constrained on one or two planes only (automatically) and not all three? For example; you'd insert the part and you'd pick the two planes that you want to be flush constrained but the 3rd plane you'd constrain yourself.
View 2 Replies
View Related
Oct 29, 2013
I am trying to insert a revolution joint into my assembly but it seems it does not exist. I have attached two screenshots. One is from a tutorial I am going through which contains a longer list of available joints. (More.png) The other is the assembly I am working on which contains less available joints. (Less.png)
View 1 Replies
View Related
Jun 8, 2012
I get the following error when I try to insert screws into a new assembly:
Unable to successfully update the member part file. Problem occurred when setting thread data.
I click OK and the part inserts but the thread does not look right! Compare the threads on the screws on the left (shown incorrect) with those on the right!
Using Inventor 2013.
View 4 Replies
View Related
Nov 23, 2012
Is it possible to make the column 'REV' automatically equal to the 'Item' column in attached BOM view? I manually added the values 1 to 5 in the REV column for example.
Maybe with some ilogic rule? I don't know if it's possible and/or where to start.
When i place a mono-part-detail on a assembly drawing i want to be able to place a leader referenced to the REV value. When this is possible there is a link between assembly item number and the mono-part leader.
View 1 Replies
View Related
Jan 11, 2013
I have an assembly that is made up of 3 unique parts ( 5 parts total). These parts and there features are to be laser cut, then assembled and welded along the outer perimeter in the small chamfer. I have designed the parts to have 5/16 holes, which will be later tapped to 3/8"-16 UNC after assembly.
Once these parts are assembled, I don't understand how I can change the holes to reflect this. Meaning I want the parts to be pre-drilled(laser cut) with 5/16 holes, but I want the assembly to then have 3/8-16UNC holes.
The hole command will not let me select the existing hole features in the assembly and add threads. What is the consequence of inserting a 'new' hole with 3/8-16UNC threads over the existing 5/16" holes in the assembly?
Is my workflow incorrect? should I have the parts modeled with the tapped holes and just make a note on the drawing to not tap these holes until assembly? how does that affect the laser cutting?
View 9 Replies
View Related
Oct 17, 2012
I want to make an assemby consisting of 3 parts. A crank shaft and a crank pin that screw into threaded holes in a crank disk. How can I insert them and prevent them rotating in their holes but still allow the whole assembly to rotate around the axis of the shaft? Also how could I lock a flywheel on to the shaft so that whole assembly can rotate togeather?
View 1 Replies
View Related
Apr 25, 2012
I don't know how useful this will be but I was trying to figure out how to track what item number in an assembly any given part may be. I was thinking that on an individual part drawing I may want to reference the item number that is used in an assembly's Bill of Material for that part. I can't find where this may be stored for retrieval. If I do this I would want it to be automated so that if the BoM were renumbered the part file and drawing would update to the new item number.
This may not be possible since any part may be used in any number of different assemblies with different locations in a Bill of Material. Most of our assemblies use "one off" parts that are only used in that assembly so it may be possible in my particular situation to do this if there is a way to get at the BoM item number and connect it to the IPT file.
View 4 Replies
View Related
Sep 22, 2006
here's a macro I wrote to copy the filename to the Part Number iProperty for all parts and sub-assemblies contained in a top-level assembly. I wrote this after using a bunch of custom iParts and all the Part Numbers were the same for each part! (my fault of course, but a pain to fix one at a time).
Public Sub SetAllComponentPartNumbersToFileName()
Dim oAsmDoc As AssemblyDocument
Set oAsmDoc = GetActiveAssembly
If oAsmDoc Is Nothing Then Exit Sub
SetAssemblyComponentPartNumbersToFileName oAsmDoc
End Sub
[code]....
View 4 Replies
View Related
Nov 19, 2011
I'm using Autodesk Inventor 2012 SP1 64 Bit on a Windows 7 machine without vault.
I seem to be missing something. I cannot get the parts list in assembly drawing to fill the part number column. See the image below.
The BOM has the part number field filled out as shown below. Is there someway that I need to map the iProperty to the part number column in parts list?
View 6 Replies
View Related
Jan 29, 2013
Is it possible to run an external rule in assembly occurrences?
You have RunRule in Component, But it does not seem to work with external rules
I referenced to occurrences and opened it using ThisApplication.Documents.Open(filepath, False)
Then i tried calling the same external rule. I thought it would run the external rule in the opened file,
but I ended up with a infinite loop on the main assembly.
Is there a way to run your rule in every occurrence with external?
View 2 Replies
View Related
May 9, 2013
I would like to know, whether is there is any ilogic option by which the Custom content center is triggered automatically to insert component in an assembly.
View 7 Replies
View Related
Oct 8, 2012
I'm dreaming of a Macro to automate the following process that we use every day. We use it to highlight connectors so people can build our product easier.
We manually do the following:
In a drawing view we select a whole set of components (the connectors). Afterwards we change the color to green (using properties) & press hidden lines. This way you can clearly see where you need to place the connectors.
-> see .pdf attached with some pictures making it all clear
I'm being busy to create the code for this but I'm stuck over adding occurrences to a selection set so I can then apply the hidden line command
This is my code so far:
Sub AutoColor()'Step 1 Select a drawing view ' Get the active drawing document. Dim drawDoc As DrawingDocument Set drawDoc = ThisApplication.ActiveDocument ' Have the user select a drawing view. Dim drawView As DrawingView Set drawView = ThisApplication.CommandManager.Pick(kDrawingViewFilter, "Select a drawing view.") Dim docDesc As DocumentDescriptor Set docDesc = drawView.ReferencedDocumentDescriptor ' Verify that the selected drawing view is of an assembly.
[code]....
Step 1 works
Step 3 works
Step 4 & 5 are for a later moment
Step 2 calls the sub "SelectOCC". this sub cycles true the occurrences, I can filter them on file location so I only get the components needed (the connectors). In theory it should be possible to add the given occurrences to the selection set so I can run Step 3 afterwards on it.
But I don't succeed in doing this, I've tried countless of methods but without success.
View 6 Replies
View Related
Oct 24, 2012
I am writhig a macro to put text ( count number) under each occurrence in an assembly.
I got the Sequence correct and able to place the cnumber un drawing sheet.
But What I need to do is to place that number under consequent occurrence.
find the Image file and you will see wht i am trying to get.
i am icluding the Macro i written as well.
Private Sub RHSnumbering()
Dim oDrawingDoc As DrawingDocument
If ThisApplication.ActiveDocument.DocumentType <> kDrawingDocumentObject Then
[Code].....
View 1 Replies
View Related
Jul 27, 2012
My application, writing in C#, exports all vertex-data of parts in an assembly to external files.It uses the surfacebody.getExistingFacets method to do this and shows a progressbar to visualise progress.
The application works fine, only when it is finished, when I zoom in or zoom out in inventor, a huge delay exists before the actual zoom is done. And everytime I scroll the mouse wheel or touch my 3D mouse the delay is there.It's really up to several seconds everytime.
However when I close the assembly and re-open it again immediately after my app finished, these delays are not there anymore.Do I have recalculate something, or do I have to invoke a 'free-something' command ?
View 6 Replies
View Related
Dec 3, 2013
Why when I mirror a part in an assembly the mirrored part gets a new part number? I want to mirror only the position of the part which is always the same part. Is it possible to do that in Inventor?
View 7 Replies
View Related
Aug 4, 2012
I am trying to download pictures in folders and sub folders into the LR catalog. The import brings all the pics in the subfolders over but when II click on the parent folder it shows not pictures or number of pictures in it.
View 4 Replies
View Related
Dec 3, 2013
I have excel tables that contain 4 columns of data.
The Y co-ords pf the required object
The X co-ords pf the required object
The rotation of the required object
The object number
What would I need to do to insert a block at the coordinates to the rotation shown then have a leader with the point number labeling the block (but the text not be rotated to the angle of the main block.
View 2 Replies
View Related
Mar 15, 2013
There is a line (and two big dots) representing EVERY Assembly insert. And I've been trying to figure out how to hide them.
May be they were there because of some link/point code. But I was unable to find and thing.
In the attached screen shot (taken from a print preview), I've circled one of these dots and pointed at one of the lines. I need to get rid of these.
View 9 Replies
View Related
Dec 11, 2013
I have a flat pattern with ordinate set dimension, taken detail from one end.
parent view having ordinate dimension from left end and i have taken detail view of right end.
i need detail view dimension with same origin dimension as like parent view.
View 3 Replies
View Related
Sep 12, 2013
How do you turn off the default check for "Propigate to parent view" when creating a breal in a drawing view. I have never had the need to use this option yet it is checked by defalt.
View 8 Replies
View Related
Oct 10, 2012
I was wondering if there is a way that a mirrored part can be redefined. Problem I have is that after renaming the parts in the assembly the mirror will no longer update and references the original part before being renamed. I can't seem to find a way to redefine this so my mirrored part will update. To date I have been deleteing out the mirrored parts and creating them again.
View 1 Replies
View Related
Feb 1, 2012
The computer at work is saving the 'old version' files in the parent folder instead of the old versions sub-folder. Where is the setting for changing this?
IV 2012 Pro Suite
View 4 Replies
View Related
Aug 19, 2011
I stumbled upon a problem with iparts losing their constraints back in January, 2010. The issue is that if the parent ipart is changedor update and the children are "regenerated", the assembly constraints will fail. This defect crept in with R2010 and has basically crippled my fasteners library. I cant add to or make any corrections to my ipart parent file. This defect is being tracked by Autodesk with numbers 1260490 and 1300828.
AD did release a hotfix for 2011, but this doesnt work with ipart files that already have the children created (DL15973874).
The only way to fix the issue is to re-generate the children to the current release and then fix the assembly constraints. Only trouble with that is these are fasteners we are talking about. This would take months to do and is not practical.
Guess what I am wanting is to know how others are handling this. I could leave all the iparts alone, then rebuild them under totally new names for 2012. Thats a lot of work and I really dont like the idea of having two libraries to maintain.
View 9 Replies
View Related
Oct 10, 2007
If I would like to compose a booklet in Corel Draw, how can I insert page numbers ?
I know the use of Master Layer. But contents on it will remain unchanged for all the pages. However the page numbers should auto increase page by page.
Adobe InDesign or pagemaker is useless infront of Corel Draw. But the problem of Footer (page numbering) has to be resolevd. So that Corel Draw will replace InDesign or related book work softwares.
how to add page numbers.
View 12 Replies
View Related
Apr 22, 2014
I am formatting a Bible for a client. The text was provided with verse numbers before each verse, but each chapter is one long paragraph. Now the client has decided they want each verse to begin a new paragraph. How can I globally insert an End of Paragraph mark before each superscrpt verse number?
View 8 Replies
View Related
Oct 3, 2013
Parent assemblies of the one being edited in place report being changed when a constraint limit is enabled. To reproduce, open Assembly3 (attached) and edit Assembly1 as shown.
Run the following code (also attached).
static void Main(){Inventor.Application application = Marshal.GetActiveObject("Inventor.Application") as Inventor.Application;ApplicationEvents events = application.ApplicationEvents;events.OnDocumentChange += OnDocumentChange;AssemblyComponentDefinition assembly = ((AssemblyDocument)application.ActiveEditDocument).ComponentDefinition;ComponentOccurrence component1
[Code] .....
The following is written to the console.
Document changed : kShapeEditCmdType : kBefore : Assembly1.iamDocument changed : kShapeEditCmdType : kAfter : Assembly1.iamBefore enable constraint limitDocument changed : kShapeEditCmdType : kBefore : Assembly1.iamDocument changed :
[Code] ......
View 5 Replies
View Related
