AutoCAD Inventor :: Suppressing Assembly Feature Via Level Of Detail?
Dec 13, 2011
I'm trying to use the Level of Detail function to add a hole feature in a sub assembly that will be used in 2 places inside the main assembly, but the sub assembly is present in many other location and does not need this hole. My thought is to have the master level of detail depict the hole feature and have another level of detail with this hole suppressed.I can't get the two levels of detail to save the desired outcome. When I switch LODs, the hole feature will not suppress or unsuppress as desired. Is this possible or am I doing something wrong.
When holes are put in at the assembly level by using the 2d sketch command, projecting geometry and then using the hole command in the Model tab works great. Is there a way to transfer the holes put in at the assembly level to the detail drawings (ipt)?
In order to reflect production process, I have to create holes on the bent pipe at assembly level after 2 bent pipes are welded to the straight pipe. Now when I suppress holes, it does not suppress only at LOD or view rep but throught the whole assembly.
Is it possible to suppress features such as hole using LOD or view rep, which are made at the assembly level? or I have to use another method? See below in highlighted.
company needs a very elaborate parts list on the drawings regarding different custom properties of parts (so I created new parts to easily add these custom columns...without screwing up parts in the content center somehow).
I needed to get things up and running quick so I imported a good handful of bolts and nuts from McMaster Carr.
the threading on the bolts is so detailed that it's really cluttering up the drawing views with extra line geometry (basically black blobs wherever bolt threads or hidden bolt threads are located)...is there any way to lower the detail of objects, say just to show the outline of the bolt and it's "perimeter" thread outline...but not show the individual threading across a bolts face?
Inventor 2013..I am trying to show a part in a drawing of three different configurations of a casting:
1) Rough as received from the foundry
2) Partially machined or rough machined
3) Final machined
What is the most basic bullet-proof way to show this? Three different models?What is the procedure to change the representation to show changes in the model?Why does suppressing a machining feature in one representation change all representations?The rough part is brought into an assembly and the machining or removal of material happens in the assembly.
Is it possible to set a view representation and level of detail (combine them) at the same time in an assembly. Or do they have to be set individually?
Attached images show the first assembly option with four sections together. The second image shows the second assembly option with the top and bottom sections only.
We are starting using the level of detail functionality and I am really missing the opportunity to lock this LOD the same way as I can with a Representation view.. Is there any way to do this ??
I am creating a large assembly that will contain many level of details. When I complete a "section" of components, I create a LOD for just that section (all other components suppressed). However, all the components I add after that LOD has been created are added to that LOD. I would like all additional components to be automatically suppressed, unless I have that LOD active.
Inventor 2013 Product Design Suite Vault Professional 2013 Windows7 x64
I have an assembly and using ilogic to control the wide of the machine.The wider machine has some different brackets which I am turning on and off by using "component . IsActive" in ilogic.
I had to make a new level of detail for it to work, and this is all fine except everytime I open this assembly it defaults back to master level of detail, so I always get this error.
How do I control level of detail with ilogic or how am i suppose to turn parts on and off.I have seen some impressive assemblies controlled with ilogic how do they do it.
I know there's the setting in the Tools/Application Options/File dialogue that allows you to set a system wide setting of which LOD that opens each time you activate an assembly.
But what about a file specific setting where you are able to set a specific LOD that always opens for that specific assembly file? Or will that conflict with the system wide settings?
Granted, I know Inventor will open the last saved LOD (based on that system wide setting), but my client has users that, for a lack of better terms, are not paying attention or being aware of what LOD they are opening and thus editing the wrong LOD, etc.
When i set a specific Plane in my new Level of Detail (Right click on the box set this view as "top") and save, i switch back to master and now the view from the new level of detail transferred over.
How can i make custom top,front,right niews for my new level of detail so it wont affect other details (especially my master view).
I've created a view in my presentation file and tweaked all my components to where I want them. How do I change the level of detail associated with a particular explosion already created? I know when you create the view you can select which representation and level of detail to use, but how do you change these after the exploded view is created?
I am running Inventor 2014. How I can sort or re-arrange the list of level of details? I added a new level of detail and it is at the bottom of the list in the browser. I would like to move it up near the top of the list so that similar levels of detail are grouped together.
First, is there a way to add a new part to an assembly and it only be added to the active Level of Detail (and the Master, of course)? It is adding a significant source of potential error when adding a part to an assembly when you have to make sure to go back and change the status of a newly added part in each Level of Detail.
Secondly, is there a better solution than using Levels of Detail in the first place? We typically have assemblies that are in a few stages: 1) an empty shell 2) shell with ballast 3) shell with ballast and fill material. I have started using Levels of Detail to suppress components at each of those 3 stages because it is important that we have accurate weights for each stage. Our assemblies are not terribly large so memory usage is not really a problem, and I have read on Levels of Detail it is usually useful in a memory management situation.
Lastly, is there any good reason to not be able to save a Level of Detail when there is a positional representation active?
If Inventor 2010 has the capability of showing certain parts/sub-assemblies in phantom style lines on the idw/dwg file?
I have a box unit, where I want to show the base, but with the posts meeting it in phantom. Then when I do the drawing for the posts, I want the base and roof in phantom. Then when I do the roof drawing, I want the posts in phantom again.
I can't change the BOM level as it will apply to every level of detail. when suppressed, they completely vanish. Is there a way to do it rather than find the parts in the browser (whilst in the drawing) and change the properties (over-riding them)?
I have to create a workplane and then define the section.
Usually the sectioning is done w.r.t flat surface/s and then the section plane can be offset depending upon our requirement and placement in the assembly. I am not getting this offset option when I want a Sectioned View. The section takes where I click on the flat face straight.
I have a sub assembly with frame members and have used different colors for different sizes. In the top level assembly all the colors are lost, presumably because it defaults back to material color. Is there a way to get the frame member colors to display and all assembly levels?
I am using IV 2010. I have an assembly that is made up of subassemblies and individual parts. Some of the subassemblies share the same parts. I would like to know when I create the BOM for the top level assembly if it can show parts only with no assemblies. I want to get the BOM to combine like parts from all subassemblies in one list. I have tried to use the part only option and it still puts subassemblies in the BOM and breaks the parts out per subassembly.
When ballooning an assembly drawing having a structured/all levels BoM, the balloons default to the part level of the BoM hierarchy. Is there a way to have the balloons reference the part's subassembly (direct parent) without having to override the value of each balloon manually?
I have an assembly file in which I have created several levels of detail. My intent was to suppress specific parts in the assembly (for views in the idw and to calculate the weight of the assembly).
I have noticed that the mass is incorrect for the level of detail that I want calculated. I determined this after creating a new assembly and deleting all parts that were not used in this level of detail. And, by viewing all parts individually and adding them up by hand.
All parts in the assembly have the correct density. I have selected to calculate the mass properties of the active level of detail when updating.
My questions: Am I correct in assuming that the assembly will caculate only the parts that are not suppressed? Or, am I thinking of it wrong? Is this particular assembly messed up? I haven't noticed this before and am now concerned that my weights have been incorrect.
My solution to use right now is to create a new assembly just for figuring out the weight. I think there is a better way.
I have a rule that turns off all work geometry and sketches of an assembly and all referenced parts and assemblies.
This rule is almost perfect.
When i run the rule. All sketches and work geometry are turned off. But sketches in sub assemblies remain visible in the top assembly. When i open the document of the sub assembly the sketches are off.
So what I see is a top assembly 'override' of sketch visibility inside sub assemblies
How can I turn off visibility of a sketch on a level higher?
Currently I have some code which loops through all sub components of an assembly and sub assemblies. However I only need sub components inside the top level assembly and not any sub-assemblies. Is there an easy way to acomplish this?
This code will list all sub components inside an assembly when a drawing is open.
Dim oDocument As Document Set oDocument = ThisApplication.ActiveDocument Dim oRefDocs As DocumentsEnumerator Set oRefDocs = oDocument.AllReferencedDocuments Dim oRefDoc As Document For Each oRefDoc In oRefDocs debug.print oRefDoc.FullDocumentName Next
