AutoCAD Inventor :: Incorrect Mass For Assembly With Levels Of Detail
Sep 20, 2013
I have an assembly file in which I have created several levels of detail. My intent was to suppress specific parts in the assembly (for views in the idw and to calculate the weight of the assembly).
I have noticed that the mass is incorrect for the level of detail that I want calculated. I determined this after creating a new assembly and deleting all parts that were not used in this level of detail. And, by viewing all parts individually and adding them up by hand.
All parts in the assembly have the correct density. I have selected to calculate the mass properties of the active level of detail when updating.
My questions: Am I correct in assuming that the assembly will caculate only the parts that are not suppressed? Or, am I thinking of it wrong? Is this particular assembly messed up? I haven't noticed this before and am now concerned that my weights have been incorrect.
My solution to use right now is to create a new assembly just for figuring out the weight. I think there is a better way.
View 5 Replies
ADVERTISEMENT
Oct 29, 2013
I am having a problem with an assembly not showing the correct total mass of all of its components and sub-assemblies. The value is out by nearly 20%, over 3000kg!
I have narrowed the mass discrepancy down to a derived part of a sub-assembly. But this incorrect mass is only present when I navigate to the derived part's iproperites via the browser tree of the higher level assembly where I am having the mass problem. It is as though the top assembly got some of its mass property information from a previous point in time, i.e. possibly before the derived part's mass properties were updated, and now refuses to look at the current information.
By the way, I have opened up and checked the mass properties of each sub-assembly and the derived part; and when opened individually these show as correct. I have also tried 'Rebuild All' with no success.
Is it possible for mass properties in an assembly to become corrupted?
View 6 Replies
View Related
May 7, 2012
I am wondering if it is possible to do a mass change of all project files at once. What I wish to change is my content center location, template location and style manager file locations. I have all these setup already and tested with one project but I dont want to do it with the other ... LOTS! ... manually unless I must.
View 1 Replies
View Related
Apr 16, 2013
I need to export our BOMs from inventor into a csv file that can be loaded into our ERP system. All of that code is working great and the help files were useful in getting this completed. However it only will work if the assembly model is in the master level of detail!! This is not good at all since the only reason we use levels of detail is becasue our main level assemblys are 1000+ comp and our computers cant function with these levels of models in the master level of detail!! Is there anyway around this?
View 2 Replies
View Related
Apr 23, 2012
Is it possible to use the 'Link Levels of Detail' command via the API ?
I can activate the command by using the CommandManager
oContDef = ThisApplication.CommandManager.ControlDefinitions.Item("AssemblyBonusTools_LinkLODsCmd")oContDef.Execute
But the command then requires a UI selection - I want to select the iLogic LOD.
I've tried using the CommandManager.PostPrivateEvent but to no avail.
View 3 Replies
View Related
Sep 21, 2013
I was checking my prints and noticed that the mass for the assembly was not shown correctly. The mass for each component is correct, but the mass for the assembly is less than the total mass of the parts..... how can that be?
Watch this video. The mass for my assembly is reported from iProperties as 10 lbs, but the mass for one of the parts is 60lbs. I would expect the mass for the assembly to be at least 60 lbs, but it is not. I tried a "Rebuild All" and an "Update Mass" on my assembly, but that did not fix it (30 sec mark in the video).
This assembly is part of a much larger assembly (around 35,000 parts). There are several more assemblies doing this and I need to get the mass correct.
I am using 2013 x64, SP2.
View 5 Replies
View Related
Jun 5, 2013
I have an assembly that i need to know the mass of, easy enough, however the assembly needs to be weighed without some of the parts in it. I hought i could simply uncheck "enabled" of the unwanted parts and re check the mass, however it does not change. Any solution besides adding the wanted parts individually?
View 6 Replies
View Related
Sep 6, 2013
I would like to make a form that updates / creates custom properties for ALL parts in an assembly so that i dint have to go through them one by one.
Is there any sample code anywhere or a good code resource?
View 1 Replies
View Related
Dec 6, 2013
Seems like Inventor ignores wires and cables when calculating mass of the whole assy.
View 1 Replies
View Related
Aug 21, 2013
I am creating a project with multiple level in ACA 2014. Set up levels like we always have but now we have a project where the lowest level is below 0. When I generate a model or elevations, the model is created with the lowest level inserted at z=0, not the real level.
After I experimented, if you create a model with say level 1 & 2 not included, it creates the model with level 2 @ z=0 ?
View 5 Replies
View Related
Jun 14, 2012
I am trying to get the correct total mass of a particular assy variant in a view label. I am trying to avoid using I-Assemblies due to the length of time it takes to set up and inevitable fudging of parts lists with phantom parts when things go awry. Anyway, to get around that clumbsiness, I use a combination of suppresed parts, assembly Level of detail (LOD) and View representations to switch parts on and off for various assembly variants of a theme (which works fine for me). see my "Mass of LOD's.jpg" attachment which should fully explain the parts list filtering and what I WISH to achieve. My objective is to get the correct MASS per Level of Assy and View Rep (both called the same) to be automated, correctly (as per LOD/VIEW REP), ideally, in the view label or in a leader note. I reckon I was able to do this way back in MDT? Any enhancement in Inventor 2013?
Inventor 2012
Vista Ultimate 64bit
View 2 Replies
View Related
Jul 19, 2012
I have tried just about everything and the mass properties center point of gravity is coming out incorrect.
I have created a box 300x300x300 with the center of the box at 0,0,0 (for testing the cg) . The result I get is not 0,0,0 one of the values always comes out to be not zero, depending on the orientation of the box. Is this a bug?
Dim cg As Point3d = T.MassProperties.CentroidMsgBox(cg.X & vbCr & cg.Y & vbCr & cg.Z)
View 4 Replies
View Related
Dec 13, 2011
I'm trying to use the Level of Detail function to add a hole feature in a sub assembly that will be used in 2 places inside the main assembly, but the sub assembly is present in many other location and does not need this hole. My thought is to have the master level of detail depict the hole feature and have another level of detail with this hole suppressed.I can't get the two levels of detail to save the desired outcome. When I switch LODs, the hole feature will not suppress or unsuppress as desired. Is this possible or am I doing something wrong.
View 3 Replies
View Related
Nov 19, 2012
How can i use a level of detail from sub assembly in the main assembly?
View 2 Replies
View Related
Jan 23, 2012
When holes are put in at the assembly level by using the 2d sketch command, projecting geometry and then using the hole command in the Model tab works great. Is there a way to transfer the holes put in at the assembly level to the detail drawings (ipt)?
View 4 Replies
View Related
Jul 1, 2013
I have an assembly with 10 parts in it. We use many assembly features at the assembly level (Revolve cut, Extrusion cut..etc). How to find the mass difference of each part by comparing at its parts level and its assembly level.
View 1 Replies
View Related
Dec 12, 2013
I'm not getting the design levels of assembly, just major offset and elevation, how can i get all design levels from where my assembly is changing and where it is matching to the existing surface, is there any band problem or anything else, im sending the view that how i'm getting my cross section and also i want to know that how can i control text size because it is too big for sections.
View 6 Replies
View Related
Oct 3, 2011
I've been looking for a solution to remove the unit string ie Lbs, g, kg from the value given from a 'Mass' value in a text string.
As you may all know, creating text and having a 'physical property - mass' value...the unit string is there...
Lots of people on here have the problem...no-one has got a solution.
Until now...
Basically...open the part you need to get the mass property of in your text string.
Follow the instructions on this webpage...this is the first part...
[URL]
Basically, this creates a Mass property value in the parameters table that you can call on as a text parameter.
It's similar to the custom iproperty model - mass but NOT the same.
Once you have done this, you can go to the drawing of the part and create a text string in the drawing and call it up as shown in this procedure. BUT it still has the unit string.
Here's the best bit that you want to know...
To get RID of the unit string...open up the part again from the drawing...click on the parameter icon...find the user parameter...in the Nominal value column, right click on the value and you get a pop-up that gives you 3 options...
Custom Property Format, Make Multi Value & Delete Parameter.
Click on Custom Property Format.
The pop-up window comes up...showing you the property type...in my case...the 4 left columns read Text, g (grams), Format & Precision...
On the right hand side I have a Preview of the text...then 3 check boxes...Units string, Leading Zero's, Trailing Zero's.
Units string is checked.
Uncheck it.
Close it...Save your part...go back to the drawing and hey presto!...the text now shows the weight you require as a straight value...no units!
View 9 Replies
View Related
Nov 20, 2011
How can I see the mass of a solid, or if it's not possible, at least the volume.
View 1 Replies
View Related
Jun 14, 2013
I was performing some FEA analysis and was getting some strange results. So I investigated into my material properties to find that mine were INCORRECT! I looked at some of my co workers material libraries and they seemed to be correct. How do I go about possibly resetting my material properties. I just installed inventor 2014 about a week or 2 ago. I have attached a screen shot of the incorrect material properties.
View 4 Replies
View Related
Jun 6, 2012
I am using INV 2012 and I wan to to know a trick how to convert the weldment assembly back to regular assembly template.
View 1 Replies
View Related
Jul 10, 2012
I'm looking for the best way to create a separate assembly out of various component parts in an existing assembly so that the whole thing can be placed in an assembly as you would a part, I know it's possible to demote components within an assembly but are there any other methods similar / better ?
View 2 Replies
View Related
Sep 18, 2012
We have an iLogic assembly with to parts in it. Maybe to cylindrical parts. The iLogic rules should do the following.
1. Start a Rule after open document.
2. This Rule starts a Rule in the first cylindrical component.
3. This Rule ask the user for a diameter.
4. The assembly gives this new parameter value to the second component
5. Then the assembly calls another rule in the second component to change it with the new parameter
Everything is working fine when the following combinations are taking place:
1. I open up the assembly out of vault or from a local drive or an accessible server drive
2. I insert the assembly as sub assembly in another assembly from a local drive or an accessible server drive
It don't work with the following situation:
- I insert the assembly as sub assembly in another assembly out of vault
Then the user becomes the dialog "Choose a diameter" twice.
I don't know why, but I have the idea it has something to do with the functionality of inventor to insert a component more than once. If you insert a component in an assembly Inventor gives you the opportunity to add more than one occurence after each other.
change that behaviour? Maybe a switch to change that inventor "add more than one occurence" behaviour.
View 1 Replies
View Related
Feb 9, 2012
I have encountered a problem with the Tube and Pipe styles.
As you can see, I have a rack assembly with a custom tube and pipe style. A wire as a tube in orange, and a tube support in white. Both have their seperate colorations at a style in the tube and pipe styles editor
When placing the rack assembly into the main assembly, it reverts to the coppor coloration I changed from the original style.
Steps I've taken:
Exported the styles .xml and Imported the styles into the master tubeandpipe.iam
Imported the user created .xml styles into the main assembly file nothing seems to work
View 8 Replies
View Related
Apr 23, 2012
I am trying to find the interior volume of an assembly (when am I not?!?!) by subtracting the assembly from a block that surrounds the most of it. Somewhere the assembly has a "leak" and I have been trying to use the Cross Section Analysis to track down where the inside lump is connected to the outside lump to be subtracted. Is there a less time consuming way to dynamically drag a plane across and get cross sectional views?
Even better is there a simple way to animate the analysis plane moving across the block so I can hopefully just watch and pause it when I find a leak?
Inventor 2013 (SP2 Update 2), Windows 7 Professional (64-bit), SP1, Intel Xeon 3.07GHz CPU, 12GB RAM, NVIDIA Quadro 2000, Vault Basic 2013
View 2 Replies
View Related
Oct 30, 2012
it is possible to make a constraint that utilized a parameter of a part within the assembly.
For example, if I wanted to use the thickness of a plate, which I defined in the part, could I call that parameter in a constraint?
View 1 Replies
View Related
Oct 31, 2011
My assembly has grown (about 50 parts) to where I need to consolodate some parts into subassemblies for reuse and alternate iterations of the basic design.
When I import the original parts into a new assembly, all of the constrains I created are not there of course.
I've tried creating a new empty part and then deriving a new part from the assembly, but I can't add, delete or edit any parts.
I looked at using Shrinkwrap, Substitutes, iParts, Multi-body Parts, and Multiple Solids but I remain confused.
In retrospect, maybe I should have created the subassemblies between the part and assembly stage but I didn't.
View 4 Replies
View Related
Nov 9, 2011
I want to be able to control the location/position of a component in an assembly. This is easy enough through the iProperties/Occurrence tab and then adjust the location of the X,Y, and Z offsets. Is this possible using iLogic? I have been unable to find a function to access via iLogic. Ultimately I am trying to translate a component about an axis not a pattern.
View 1 Replies
View Related
Aug 23, 2012
have one assy comprising of a valve, made in steel, an actuator made in aluminum, total weight combined is 36 kg.
I make this assy a derived ipt.. i have tried all the output options, single solid, multy solid and the weight is not the same.. since its a new ipt has its own material, ok makes sense.. .. So i use composite, i get the correct weight (yay), but now i cant turn the visibility off on the 2d drawing, in certain pipe spool view representations.
What is the correct procedure for turning multi material assys into an ipt.. to get the correct weights and get the drawings to work properly?
View 1 Replies
View Related
Jul 3, 2013
How to set the mass calculation accuracy to 'Very High' when doing calculations in iLogic.
I asked for the iLogic equivalent to the VBA term:
' Set the accuracy to VeryHigh.
oMassProps.Accuracy = k_VeryHigh
and was provided with:
oMassProps.Accuracy = 24580 'k_VeryHigh=24580
However, I believe that the value 24580 is actually equivalent to k_Medium. Confirm the iLogic equivalent value of k_VeryHigh.
Original post: [URL].......
View 3 Replies
View Related
Nov 16, 2012
In assembly file - BOM - mass property, parts with the same name (part number) i get "VARIES"..Parts have a little bit different mass - 0,167kg and 0,168kg. I do not want to have different part number.
So, i'm going to do something like this in iLogic :
iProperties.MassOfComponent("fi_N1:1")=Round(iProperties.MassOfComponent("fi_N1:1"),1)
it works but is there any way to do it for all parts (hundreds) automagically in the loop (iLogic or VB) ?
View 1 Replies
View Related
