AutoCAD Civil 3D :: Any Way To Set Level Of Detail Feature?
Mar 11, 2013I dont see any way to do this, maybe it is not possible ?
Where can I see it settings ? (if possible)
ADVERTISEMENT
AutoCAD Inventor :: Suppressing Assembly Feature Via Level Of Detail?
Dec 13, 2011I'm trying to use the Level of Detail function to add a hole feature in a sub assembly that will be used in 2 places inside the main assembly, but the sub assembly is present in many other location and does not need this hole. My thought is to have the master level of detail depict the hole feature and have another level of detail with this hole suppressed.I can't get the two levels of detail to save the desired outcome. When I switch LODs, the hole feature will not suppress or unsuppress as desired. Is this possible or am I doing something wrong.
View 3 Replies View RelatedAutoCAD Civil 3D :: Turn Off Level Of Detail View
May 29, 2013How can I turn it off permanently? Or change the default to off? It's always on when I open my drawings.
I save the files with it off, but when I reopen, it's still on. A real pain in the butt when plotting since if I batch plot, all of my contours are off, which eliminates using batch plot entirely. Luckily, I only have 5 figures at the moment, but once we get to design phase I will have many more and require batch plotting.
I'm using civil3d 2013, I have never run into this before with any other versions.
AutoCAD Inventor :: Position Rep And Level Of Detail
Jan 26, 2012Is it possible to set a view representation and level of detail (combine them) at the same time in an assembly. Or do they have to be set individually?
Attached images show the first assembly option with four sections together. The second image shows the second assembly option with the top and bottom sections only.
AutoCAD Inventor :: Disable Level Of Detail?
Mar 19, 2012Is there a way to disable the level of detail? I personally find this feature most annoying.
I am now starting to understand it after being tripped up by it early in my Inventor carrier.
But even now in understanding it more, I see no point in it.
The problem I have is I can have more then one level of detail in my model to show a specific way in my
one drawing. Then this specific level of detail when changed for a different drawing will screw with the first drawing.
Why can't one just suppress certain items without having to worry about this. Heck, isn't this what Iparts and iassemblies are for?
AutoCAD Inventor :: Level Of Detail In Idw Text
Oct 27, 2011anyway to get the level of detail into text in an idw?
View 2 Replies View RelatedAutoCAD Inventor :: Level Of Detail Functionality
Mar 19, 2007We are starting using the level of detail functionality and I am really missing the opportunity to lock this LOD the same way as I can with a Representation view.. Is there any way to do this ??
View 4 Replies View RelatedAutoCAD Inventor :: Can Lock A Level Of Detail
Jul 9, 2008I am creating a large assembly that will contain many level of details. When I complete a "section" of components, I create a LOD for just that section (all other components suppressed). However, all the components I add after that LOD has been created are added to that LOD. I would like all additional components to be automatically suppressed, unless I have that LOD active.
Inventor 2013 Product Design Suite
Vault Professional 2013
Windows7 x64
AutoCAD Inventor :: Level Of Detail With Ilogic
Jun 28, 2011I have an assembly and using ilogic to control the wide of the machine.The wider machine has some different brackets which I am turning on and off by using "component . IsActive" in ilogic.
I had to make a new level of detail for it to work, and this is all fine except everytime I open this assembly it defaults back to master level of detail, so I always get this error.
How do I control level of detail with ilogic or how am i suppose to turn parts on and off.I have seen some impressive assemblies controlled with ilogic how do they do it.
AutoCAD Inventor :: Setting Default Level Of Detail
Mar 28, 2012I know there's the setting in the Tools/Application Options/File dialogue that allows you to set a system wide setting of which LOD that opens each time you activate an assembly.
But what about a file specific setting where you are able to set a specific LOD that always opens for that specific assembly file? Or will that conflict with the system wide settings?
Granted, I know Inventor will open the last saved LOD (based on that system wide setting), but my client has users that, for a lack of better terms, are not paying attention or being aware of what LOD they are opening and thus editing the wrong LOD, etc.
AutoCAD Inventor :: Level Of Detail Custom Views
Nov 6, 2013When i set a specific Plane in my new Level of Detail (Right click on the box set this view as "top") and save, i switch back to master and now the view from the new level of detail transferred over.
How can i make custom top,front,right niews for my new level of detail so it wont affect other details (especially my master view).
AutoCAD Inventor :: Presentation View Level Of Detail?
Mar 10, 2010I've created a view in my presentation file and tweaked all my components to where I want them. How do I change the level of detail associated with a particular explosion already created? I know when you create the view you can select which representation and level of detail to use, but how do you change these after the exploded view is created?
View 6 Replies View RelatedAutoCAD Inventor :: 2014 - Level Of Detail Sorting
Aug 5, 2013I am running Inventor 2014. How I can sort or re-arrange the list of level of details? I added a new level of detail and it is at the bottom of the list in the browser. I would like to move it up near the top of the list so that similar levels of detail are grouped together.
View 1 Replies View RelatedAutoCAD Inventor :: Find Level Of Detail Using ILogic
Sep 14, 2011I'd like to drive a parameter depending on the level of detail being shown. How can find which LOD is active within ilogic?
I'll use this for driving a weldment : when the weld is on the bead parameter = 6 when the weld is off the bead parameter = 0.1
AutoCAD Inventor :: View Reps / Level Of Detail
May 20, 2013Can I have an assembly cut and make a couple of view reps or level of details so that one has the assembly cut and one does not.
View 5 Replies View RelatedAutoCAD Inventor :: Sorting / Arranging Level Of Detail
Jul 25, 2011In inv2012 is it possible to sort the level of detail list in an assembly? Or can I move a selected level up or down in a list?
View 8 Replies View RelatedAutoCAD Inventor :: Adding Part To Single Level Of Detail
Mar 30, 2012First, is there a way to add a new part to an assembly and it only be added to the active Level of Detail (and the Master, of course)? It is adding a significant source of potential error when adding a part to an assembly when you have to make sure to go back and change the status of a newly added part in each Level of Detail.
Secondly, is there a better solution than using Levels of Detail in the first place? We typically have assemblies that are in a few stages: 1) an empty shell 2) shell with ballast 3) shell with ballast and fill material. I have started using Levels of Detail to suppress components at each of those 3 stages because it is important that we have accurate weights for each stage. Our assemblies are not terribly large so memory usage is not really a problem, and I have read on Levels of Detail it is usually useful in a memory management situation.
Lastly, is there any good reason to not be able to save a Level of Detail when there is a positional representation active?
Inventor 2013 (SP2 Update 2), Windows 7 Professional (64-bit), SP1, Intel Xeon 3.07GHz CPU, 12GB RAM, NVIDIA Quadro 2000, Vault Basic 2013
AutoCAD Inventor :: Representations / View Versus Level Of Detail
Jan 5, 2012It seems that Views are easier to use, are there any benefits of View option over Level of Detail and vice versa?
View 3 Replies View RelatedAutoCAD Inventor :: How To Copy Level Of Detail To Design View
Jul 8, 2013I can find a method to copy a Design View to a Level of Detatil (DesignViewRepresentation.CopyToLevelOfDetail)
But the opposite way (i.e. LevelOfDetailRepresentation.CopyToDesignView) doesn't seem to exist - it is possible in the GUI.
Will I have to traverse the complete structure and set visibillity one by one to obtain the function then? Or are there a better/faster way to go?
AutoCAD Inventor :: Level Of Detail To Show Dotted Lines
May 31, 2012If Inventor 2010 has the capability of showing certain parts/sub-assemblies in phantom style lines on the idw/dwg file?
I have a box unit, where I want to show the base, but with the posts meeting it in phantom. Then when I do the drawing for the posts, I want the base and roof in phantom. Then when I do the roof drawing, I want the posts in phantom again.
I can't change the BOM level as it will apply to every level of detail. when suppressed, they completely vanish. Is there a way to do it rather than find the parts in the browser (whilst in the drawing) and change the properties (over-riding them)?
AutoCAD Inventor :: Use Level Of Detail From Subassembly In Main Assembly?
Nov 19, 2012How can i use a level of detail from sub assembly in the main assembly?
View 2 Replies View RelatedAutoCAD Inventor :: Transfer Holes Put In At Assembly Level To Detail Drawings (IPT)
Jan 23, 2012When holes are put in at the assembly level by using the 2d sketch command, projecting geometry and then using the hole command in the Model tab works great. Is there a way to transfer the holes put in at the assembly level to the detail drawings (ipt)?
View 4 Replies View RelatedRevit :: Detail Level By Type Or Element?
Aug 11, 2011Is it possible to show the exterior walls at a different detail level than the interior walls in the same view? Keep in mind they are all apart of the basic wall system family so there is no editing the family visibility at this point.
View 1 Replies View RelatedRevit :: Level Of Detail While Editing Family?
Mar 10, 2013Revit 2013: Was playing around with sketching symbolic lines in a Generic Model family. I added a line and changed its LOD to be visible in fine only. Nevertheless, it was still visible in the family editor even when the view was set to coarse.
1) How can we verify visual behavior of a family while in the family editor if the objects visibility is not governed by LOD settings? (BTW: The family performs correctly when loaded in the project, just not in the family editor).
2) Is the fact that LOD is ignored in the family editor by design or a bug?
3) Is there any visual cue that tells us that a particular line will be not visible at a LOD?
4) Should we be duplicating Ref. Level views in the family to keep things straight?
AutoCAD Inventor :: How To Create LOD With Hole Feature Suppress At Assembly Level
Sep 3, 2013In order to reflect production process, I have to create holes on the bent pipe at assembly level after 2 bent pipes are welded to the straight pipe. Now when I suppress holes, it does not suppress only at LOD or view rep but throught the whole assembly.
Is it possible to suppress features such as hole using LOD or view rep, which are made at the assembly level? or I have to use another method? See below in highlighted.
AutoCAD Civil 3D :: Average Level Within An Area
Feb 18, 2013I have been able to undertake this with other software and have desperately tried to find this same function in Civil 3D .
Is there a command that returns the average level of any particular surface within a specified area, for instance if we have a generated a large surface and then draw a square in the middle of the surface, can it calculate the average level within the square only?
AutoCAD Civil 3D :: How To Add Super Elevation Detail On Profile Band
May 14, 2013How to add super elevation detail on Profile band.
View 1 Replies View RelatedAutoCAD Civil 3D :: Convert DWG File With Level Curves
Apr 23, 2013I have a file saved in autocad 2013 (dwg file extension) that contains level curves and points similar that an autocad civil 3d file and also have the layers. I want to convert this file to a civil 3d file for doing section of the curves whit the program. I don't know if it exist a method or not directly or indirectly.
View 1 Replies View RelatedAutoCAD Civil 3D :: Intersection Of Level Plane And Surface?
Jun 5, 2012How would you show a intersection line showing the intersection of a surface and a level plane or level surface?
Intel Core 2 E8500 @ 3.16Ghz
RAM 8 GB
64 bit
Windows 7 Enterprise SP 1
ACAD Civil 3D 2011
AutoCAD Civil 3D :: Set Height Between Invert Out Pipe And Rim Level
Mar 1, 2013I need to know if there is a way (like an expression) to get de height between invert out pipe and rim level?
My question is about a structure with 2 or more pipes at different level and needed to define the height for each one to the surface level (rim level).
C3D2011
MAP3D2011
AutoCAD Civil 3D :: Create Profile Using Level Data?
Jan 6, 2014How can i create a profile using level data obtained from dumpy level with civil3D
View 3 Replies View Related