I need to know if there is a way (like an expression) to get de height between invert out pipe and rim level?
My question is about a structure with 2 or more pipes at different level and needed to define the height for each one to the surface level (rim level).
C3D2011
MAP3D2011
I am trying to place my pipe invert labels at the actual point of the invert. When using the pipe label style composer, I have selected Anchor Point to be "Bottom Inner Diameter". Why is it that the label style still imports into the center of the pipe? No matter which anchor point I choose the label still inserts to the middle of the pipe. Is there a hidden setting that I am missing?
Win 7 Pro 64-Bit - Dell T1600
Intel Xeon 3.30Ghz
8Gb RAM
Civil 3D 2013
I'm currently setting up a band set and want to include a band "pipe invert depth" i.e. basically trench depth.
There are properites in the band label style composer for "pipe invert level" and for "cover" and for "pipe diameter" but not pipe invert depth.Is there a way to display the pipe invert depth relative to the reference (design) surface/alignment?
A secondary question to this is can you use basic arithmetic in the band label style composer? eg pipe cover + pipe diameter?
I'm creating pipe networks to represent existing utilities and am still a novice of Civil 3D.
I am creating sewer laterals that need to connect to the sewer main that I have already created. My problem is that I can't find a way to find out the invert elevation of the sewer main at the specific point that the sewer lateral will be tying in to. I no longer have an alignment or profile for the sewer main and I hope that I don't have to re-create them. I just want to pick a point on the pipe and have it tell me that vital information. Is there any way that I can do this in plan view?
I cannot find a way to only have pipes in profile view to only show the invert (bottom) of the pipe. All my pipes are running around the same elevation and the profile is pretty busy with both invert and crown of pipe shown.
View 2 Replies View RelatedI'm dealing with a city that based their drawings on LDD, and they chose to show pipes as just one line on a profile, representing the invert line. In LDD, they pretty much left their pipe profiles as "draft profile" or whatever is used to be called. Now I have to mimic their standard, using Civil 3D. There isn't a handy-dandy style setting that I can find, to do this.
View 2 Replies View RelatedWe are in the process of updating our pipe network structure label styles. The styles are displaying the inverts in a random order (Please see caption) & we'd like to show the inverts in descending order from highest pipe as first text string & lowest pipe as bottom text string. Is there a way to globally tell civil 3d to always use a descending invert order? Only fix we've found is to disconnect & reconnect the parts in order to adjust invert order.
C3D 2012 SP3 & C3D 2014 SP1
Win 7 Professional 64 Bit
We have a big piping job coming up and as Civil3d still lacks some of the labelling abilities we want in the profile view bands. I am updating some old vba that adds a profile line of the invert of a pipe network to a profile view effectively tracing along the bottom of the network like I know a lot of people do by hand.
My original code works on assuming that the start and end structure are at the start and end of the alignment in the revised code I want to allow for situations where this is not the case.
Leading to my question is there and easy way to find the distance a profile view part is drawn along the parent alignment or do I have look at writing my own function possibly extracting a polyline from the alignment and finding the distance using intersectionwith and distancefrom functions with the structure.
Simple program that will adjust invert elevations of a pipe based on the cover depth.
I have a existing uitility maps that only label the the cover depths. I have to show these utility crossings in my profile views. I have different rules set up for various depths when laying out my crossing pipes in plan, but I need the ability to to edit the various cover depths more quickly. I am using Civil 3d 2012 only.
I need to put a 42 x 29 Arch Pipe in my drawing. I found a 44 x 27 in the elliptical arch catalog. But I can't get it to let me create one that's 42 x 29.
And I'm also having trouble making a label for it. This is one of three culvert pipes in this network. The other two are round 36" CMP. The label for those says XX' of 36" POLY-COATED CMP @ x.xx%. Once I need the label for this third pipe to show as XX' of 42" x 29" ARCH PIPE @ x.xx%.
When I tried to make the label style, I saw "Pipe Inner Diameter or Width". But I didn't see one for height.
I need one lisp to get invert levels, I am having Invert levels and cordinates of two points of an arc how can I find invert level of a point middle of tht arc?
View 9 Replies View RelatedI have lots of section views with some surfaces and pipes. Unfortunately, in a number of section views pipes are not shown in full height because the section view level range is too little. What I am wondering is - is it possible to automatically adjust section level ranges so that they fully include pipe sections? Please see also the image in the attachment.
View 2 Replies View RelatedPipe network storm pipes: Fairly new to Civil3D and trying to set up parts list for the storm sewer pipe and would like the plan view to appear as it does currently. We use a polyline for centerline of pipe, similar to dashed linetype but line and space are the same, width set to pipe width.
View 1 Replies View RelatedI created pipe network for my storm drain project. I have located all the structures (manhole) to all angle point of my alignment as required. Also I "insert" manhole every 400' per local code requirements using the command "network layout tools; structures only. My problem is I couldn't find the tools how to trim the pipe that pass through the manhole. Please see attached pdf file.
View 1 Replies View RelatedOne of the things I seem to struggle with is being able to depict a single pipe when it needs to be shown in one profile as a crossing pipe, and another profile where you you show a lenghwise slice through the pipe. I end up tracing the pipe with eliptical objects where I'm cutting across the pipe and setting up more for the lengthwise/sideview of the pipe. Is there a way to have two different styles for the same pipe, one for a cross cut and one for a lengthwise slice?
View 1 Replies View Relatedis there a way to include the pipe min/max cover as part of the str/pipe label?
Civil 3D 2013 SP1, Win 7-64 bit
12GB RAM
Using Network Layout Tools, can you attach a pipe to a structure in a different Pipe Network? 2013 Civil 3D
View 6 Replies View RelatedI'm working in C3D 2013. When I try to use the "invert clip" option in the IMAGECLIP command, it keeps clipping everyting outside the boundary rather than inside. I've tried both tiffs and jpegs. I've tried attaching the image through the xref manager. I've tried dragging the image into the file. I've also tried just using the CLIP command. It works on my coworker's computer.
View 1 Replies View RelatedHow to get my invert labels to reference construction north rather than actual (surveyed) north?
C3D 2012, SP1
Win7-64 bit
Is there a way to remove the extra (In) and (out) invert elevation from my labels? If the IN or OUT (I.E.) is the same there is no need to label them twice. So, can I remove them? If you can remove them, how do you do it?
This is what I have
NEW CATCH BASIN A-11
TOP=427.30
I.E.(IN)=421.60
I.E.(IN)=421.60
I.E.(OUT)=421.60
I've attached an image of a storm drain invert label for a storm drain profile. As you can see, the middle manhole has all three inflow pipes labeled. Is there a way to only label the inverts of the two pipes shown in the profile view?
C3D 2014
Windows 7 64-bit
I am analyzing a culvert in a tidal zone which has an outlet invert level below the normal tidal range. The invert level of the culvert outlet is -0.520m, however Hydra flow Express Culverts will not allow a negative invert elevation to be entered.
View 2 Replies View RelatedWe are trying to find a way to produce a Greyscale BMP/PNG/ tiff file Height map, is this possible to do in C3D? Like the one attached.
View 9 Replies View RelatedTrying to model a curb height transition in my corridor. Over about 15' I want to go from a 6" curb to flush.
The only way I can seem to get it to show accurately is to leave a void in my corridor. This allows the surface which is created from the corridor to model correctly and give me a transition of my curb height from 6" to flush. Here's the object viewer showing it correctly:
However, there are a few problems with this approach. Mainly I've come to like the way the relatively new "extract corridor solids" tool (toolspace, toolbox, miscellaneous Utilities, corridor solids). I use this to create a fairly nice looking Navisworks model. With the void, now my model has a void. It seems to me that there should be a way to have a subassembly that can target both the back of curb profile and the edge of gutter simultaneously. I've tried with the standard subassembly "UrbanReplaceCurbGutter2" but with no luck. Any successful modeling a curb height transition within their corridor?
I dont see any way to do this, maybe it is not possible ?
Where can I see it settings ? (if possible)
I have been able to undertake this with other software and have desperately tried to find this same function in Civil 3D .
Is there a command that returns the average level of any particular surface within a specified area, for instance if we have a generated a large surface and then draw a square in the middle of the surface, can it calculate the average level within the square only?
i have some existing drainage pipe and structures in a base plan that i need to change the invert (which is the easy part) and the top elevation to the existing top elevation that does not meet the minimum presect in civil 3d 2012 is there a way to change these min. to match my exisitng elevation for example i have a catch basin invert is 15.45 top is 17.56 with a 18" rcp the cover will be less than 12" and i need to change this.
View 3 Replies View RelatedI have a problem iterating heights when making a polyline between two different points that have Z-values. I've used Autocad Civil 3D for working with geodetic data with height measurements before and I remember using geodetically measured height values, transforming them into a surface and then when I create a 3Dpolyline within this area the polyline automatically gets z-values that change along the line.
In other words, I could use this 3Dpolyline to obtain a profile that gives me z-values even where there is no exact point with a value has been physically measured. It was a while ago I worked with Autocad and now when I started again I have a similar problem but can't manage to create a surface and get iterated values.
My exact problem this time is:
I have a sewage pipe that runs for several kilometers that is drawn as a 3Dpolyline, with correct x- and y-values. It doesn't have any z-values yet and these are what I want to obtain. I want the polyline to have continuous z-values that changes along the polyline (not only in vertexes) so that a smooth profile can be drawn if wanted. I have data of measured actual z-values for approximately every 500 meters or so along the sewage pipe and these are currently drawn as 3Dpolylines of around 20 meters going perpendicular to the pipe (as in the picture). In other words there are bars with z-values crossing the pipe all along the stretch. Now, what I want to do is to somehow make the polyline that represent the pipe to get the heights from these perpendicular bars with the measured z-values. If I try to draw a new 3Dpolyline between two of the measured bars where the actual pipe is supposed to be, the end vertexes of the 3Dpolyline gets the z-values of the bars. However, the value in between the bars gets the Z-value 0. So, if I start a 3Dpoly on bar 1 then continue the pipe with another vertex, and then finish off at the second bar I will have 2 vertexes with the correct z-value but the middle vertex will be incorrect (0). How do I get the pipe to get the correct z values automatically iterated from the values on the crossing bars? Is this even possible to do? Should I create a surface from the bars first, and in that case how do I do that? If possible I don't only want the vertexes between bars to have iterated z-values, I also want the entire line to have a correct value.
I've attached a crappy image made in paint (since I don't have Autocad on my home PC, only at the office). And just to make things even clearer I'll give an example. Let's say the pipe distance from 1 to 2 is 10 meters, the distance between 1 to 3 is 30 meters and the z-values of bar A and bar B is 10 and 25 respectively. So, when I draw a 3Dpolyline from 1 to 4, I want the vertex 2 to automatically get z-value 15 (since it's 1/3 on the way to B). In the same way, I would like for example the point on the pipe that is right in between 2 and 3 to have the z-value 20. I won't mind redoing the bars to for example singular points instead, if that makes it all easier.
I am trying to learn Part Builder to create a custom inlet structure. I am able to build the part in Part Builder so it looks like it should and seems to work correctly when I change part sizes. I run into trouble when I try to change the model parameter for Structure Height (SBSH) to a formula invovling Rim to Sump Height (SRS). When I do this and then go to Edit Size Parameters, I get an error " one or more calculations have failed". It does not seem to make any difference what formula I use for SBSH or what size parameter or model parameter SBSH was set to before I entered the formula.
I am able to save the part without any other error messages, however, when I look at the .xml file, SBSH is a constant and not the formula I entered. I can edit the .xml file to enter the formula that I want but still the part does not function properly in a drawing.
I can make a pipe network using the new structure, however, the pipe inverts are not the same as the sump elevation of the structure. They are usually several feet below the sump. I can get the structure sump to match the pipe inverts by going to "Connected Pipes" under "Edit Structure Properties", highlighting the pipe invert elevation and then clicking "Apply". If you change the pipe using "Edit pipe properties" after this, the structure invert does not update as it should.
I have a file saved in autocad 2013 (dwg file extension) that contains level curves and points similar that an autocad civil 3d file and also have the layers. I want to convert this file to a civil 3d file for doing section of the curves whit the program. I don't know if it exist a method or not directly or indirectly.
View 1 Replies View RelatedHow would you show a intersection line showing the intersection of a surface and a level plane or level surface?
Intel Core 2 E8500 @ 3.16Ghz
RAM 8 GB
64 bit
Windows 7 Enterprise SP 1
ACAD Civil 3D 2011
