I attached a photo of the project i am working on. Im trying to figure out how to create the roof on the left hand side of the taller area. It should be a arched roof just like the others except it is also rounded.
View 3 Repliescreat roof with same line on top roof face & roof vertical side face?
View 2 Replies View RelatedI'm on CS6 on a year old iMac. Plenty of RAM and memory. For some reason all of a sudden, the tools on the left hand side of the screen won't work. All I get is the hand. What I hit or what happened. I've re-started PS, the computer and reset Bridge. How to reverse what happened?
View 2 Replies View RelatedMy lr4 doesn't have a folders panel on the left hand side. Is the software defective or is it hidden?I just lost all my images!
View 3 Replies View RelatedHere is my situation: I want to draw a vertical line on the left-hand side of my workspace about an inch away (to the right) from the left edge. Then I want to fill up that inch-wide column with a particular color. The end result being that I will have an inch-wide bar of color running vertically down the left side of my project.
I know this is probably really easy to do but it's been a long time since I had a course in Photoshop.
I use PSE 6.
I am having trouble getting my presets to show up under presets on the left hand side of the screen. They are still in develop presets but there not showing up and Ive tried deleting them and adding them again then closing out of lightroom 4 and going back in but I can not seem to get them to show up again. I must have hit something but there not showing up again
View 2 Replies View RelatedI have two sloped roofs that are joined as shown in the first image ( the site plan). The overhang of the roof on the left doesn't get trimmed when the two roofs are joined as shown in the second image ( the section).
View 8 Replies View RelatedI have a modeled right hand part and a detail drawing of that right hand part with a pin that defines r.h from l.h. and I would like to save them as a left hand part then change the model by reversing the pin. How would I proceed with this task?
View 3 Replies View RelatedHow to make the Getfiled dialog box taller to include more of the file selection area? Where to change number of lines displayed. The code is not in the Acad.dcl
Like the Acad.dcl one can edit the width of edit text window: See edit_width = 80;
acad_txtedit : dialog {
label = "Edit Text";
initial_focus = "text_edit";
[Code]....
Im having a problem editing a photo 'face' one side 'left' side is lighter than the right side because of lighting. I was wondering If I could get both sides even prefably the lighter side like the normal side.
Is this possible? Because everytime I try edit the lighter side it still remains lighter.
I have included a picture of the roof I am working on. As you can see I have 2 different roofs set up here, which doesnt look very good. I was wondering if there is a way to create one roof with 2 different slopes like I have here? I would like it to start out at a 3/12 slope for the first 4 feet and then switch to a 6/12 for the rest of the roof. I have not been able to figure out how to get this to work.
View 2 Replies View RelatedI had downloaded R.A 2012 last year and activated it. This past November, i had issues with my tower and reset it back to factory. Now I downloaded R.A 2013 first and now i can not download 2012 even when i go to "My Downloads" and try to reinstall it through Autodesk.
I have a project that requires 3 buildings and i am having a hard time making a roof for the second building. Some reason, I get "unable to create roof" when i get to the second building.
I am new to Revit architecture and in the process of learning the software. How do I create a roof walkway for a sloping roof. these walkways are for people to be able to securely walk on the roof for maintainance of mechanical equipment fitted on the roof. Of the walkway will be along the gradient of the roof.
View 1 Replies View RelatedWHen I create a roof on level two of my project, I get only two choices of roof. When I go to roof edit, I get system family basic roof, and glazed panel. No other roof families to load.
I simply want to attach a shed roof to the upper part of wall (at level 2), and it only allows me to create a hip roof.I can't seem to modify it, other than to change roof slope. I've looked at a couple of videos, but the featuers in the videos don't seem to be there.
Note that the walls are sloping (in order to shed rain). I also cannot create a slope on the top edge of the wall in elevation view, but that's another story.How to I modify the hip roof to create a flat, if that's what I must do?
I am trying to create a glass roof structure over a staircase (see attached image - underground roof). I thought that I would do this by creating an in place mass, then adding either a roof or probably more likely a curtain wall system to the faces. However I am struggling to create the mass. I have made a wireframe of the roof (wireframe) using lines where the roof folds are, in autocad. I have then linked this in to Revit.
When I come to creating the Mass, I can only place lines using the "Pick line tool", which then only places lines on a specific reference plane (level 1,2 etc), so I only get a 2d footprint of the area I want to create this mass.
If I try to create a mass face using the 3d snapping tickbox, Revit fails to register that there are any lines for me to snap too. I have tried to "Tab", but this doesn't work either.
I need to create a sloped roof. I want to base this roof upon a beam system created using a sloped work plane rather than offset from a level. I now understand that (for some reason) Revit will not create floors or roofs using work planes, but only on levels, and I know that I can create a flat roof on a level and apply slope arrows and adjust the offset height, etc. etc. but that is very imprecise (lots of micro adjustments) and a lot of steps.
Isn't there any way to create a floor or roof using a work plane as the level?
The attached image shows a roof I created "by face" from a box mass element I set on the plane - unfortunately now I cannot edit the outline to get it to fint my non-rectangular roof.
I am currently working on a home where i need to have a single slanted roof go across the perimeter of the home to form a roof. But, i have run into the issue of not being able to connect the circled area(see attached) Is it possible to connect those separate roofs and if so how?
View 1 Replies View RelatedHow do you get the roof soffit to have the same rafter cut as the roof?
View 1 Replies View RelatedI have created an ipart and want to create a right hand and left hand option of that part. I can mirror the features involved and suppress the mirror feature for the the RH part and so the RH version looks fine.
BUT if the mirror feature for the LH version is in the compute state I get both handing showing. How do I suppress one handing and leave the other for my RH version.
My left hand menu is missing?? How do I get it back? Ive tried pressing tab and F but still nothing.
View 2 Replies View RelatedI have opened an image in photoshop and when I choose "image size", it says that the image has a resolution of 72 pixels/inch ( it's a five x eight image..)
But in the bottom of image, it says 680.1K/680.1K.
I recently upgraded from ps elements 10 to 12 and have noticed that all of my albums from 10 have disappeared, but to the lower right of each photo thumbnail there is a red album icon, and if I hang my mouse over it, it tells me what album it is in, but the album isn't listed on the left of the screen. I really do not want to recreate these albums, as it would be almost impossible. I am dealing with over 2000 photos over several years (downloaded from discs from the last several years). I need to have these albums back to print, delete, edit, share.
View 6 Replies View RelatedI am currently working with a trial version of Lightroom 4.2 and i have been doing some silly things. The end result is that Catalog has disappeared from the left hand panel of the library tab ie i only see Folders, Collections and Publish Services..
I have tried to use File/New Catalog, Open Catalog and Open Recent but, in each case, I get an error box appearing: " ....catalog address refers to a location that is not available" it does not close and re-open LR
Now for the confession as to how this situation arose. I had been using LR quite happily using the catalogue which was automatically created when i started. Then I decided to try creating a new catalogue, in fact I ended up creating a few new catalogues. I decided to remove all the catalogues and start again with one catalogue which I would set up (I was not worried about losing the updates to the photos i had been playing around with) But, as i could find nothing within LR about deleting catalogues, I decided to remove them via Windows Explorer. When i went back into LR, Catalog was still showing in the left hand panel and, when i looked in Explorer, it was in the original folder My Pictures/Lightroom which I thought i had deleted along with all the other catalogues. Presumably it had been re-created automatically as in my original use of LR
I then compounded my mistakes by clicking on the + to the right of Catalog and, for interest, choosing whatever was at the top of the resultant list. It was at this point that Catalog disappeared never to be seen again.
I somehow managed to delete the editing menu on the right hand side of my screen. how can I recall this menu?
View 1 Replies View RelatedI have two picture files and I just want to create one file, displaying both pictures side by side. I have been reveiwing all of the functions in my Adobe Photoshop Elements Version 11 and I can't figure out how to do it.
View 2 Replies View RelatedI want to create a banner heading from two pics side by side, but mixing together at the centre with about a 15% overlap into each other.
View 1 Replies View RelatedWhen I add a image to my background my background shrinks to the top left hand corner of canvas. I have been trying to do this every night for a week now and held out posting until I gave up. Also when I try to paste an image I get a message saying I don't have enough memory (I have 20 GB of memory free). I tried to find Pleska plugin for adding from file but could not find it.
View 8 Replies View RelatedHow to make the options go to the left side???
View 2 Replies View RelatedI must have hit the wrong key somewhere along the line. Until yesterday,, the ruler on the top and the left side of the canvas was in inches.. now it is in ???? Starts on the left with 0 and ends on the right with 3400 !
How can I get back to inches?
how do i get the left side of my menu bar in photoshop elements 6, to show the edit, file, view, find, window and help buttons. Only the camera and little house show up. The only thing that shows is a tiny arrow which is barely visible. All was okay the first time I installed to another computer (which has since crashed). The reinstalling of photoshop the second time is causing the above problem.
View 4 Replies View RelatedI have a photo that I want to crop a little off the top and left side. However, the size of the photo must be 8 x 12. I set the aspect ratio to 8 x 12. Then on the photo, I move the line on the top and left to where I want it. The aspect ratio then goes back to original size. What am I missing?
I am using LR3 on a mac