In the upper right hand corner of most auto cad applications post dating 2012, perhaps predating as well, there is an option to select 3d views and a UCS. The scope of my job dose not include 3D, and this option only gets in the way. Is there any way to remove this from my view?
View 5 Replies
Normally, when you select an object or a group of objects and you go to copy it/them with Ctrl+V (NOT Ctrl+Shift+V), AutoCAN'T will use the bottom left extents of the object(s) as the base point for what you are pasting. For whatever reason, when I select+copy+paste an object, the base point/origin/whatever you want to call it, is way off and not even near any of the objects.
How can I reset this?
Trying to draw a titleblock for a college assignment and its supposed to start at 5,5 but that is in the middle of the paper (A3 setup). 0,0 is somewhere in the middle too - how do i get 0,0 to be the bottom left corner of the paper in paperspace??
View 9 Replies View RelatedIs there a way for the elevation of surface to be shown in the bottom left corner along with the easting and northing as the cursor tracks over the surface? currently only the easting and northing track with the cursor the elevation remains 0.00
View 4 Replies View RelatedWonder if can Can Image stretch from left or right or top or bottom side instead of diagonal ?
Reason is picture or tiff not correct length to the object of build.
I did scale to right length on "X" but the "Y" is off so how ?
I know that in Photoshop have stretch all side whatever I want but not in autocad 2011
I lost the text window that is normally docked on the bottom of the AC screen. I searched and found that F2 brings it up, but I can't find how to have it permanently docked in the bottom left hand corner, where it normally resides. I'm using AutoCad 2002.
View 5 Replies View RelatedI have a square image where I want to erase everything left of a line from bottom left corner to top right corner, so it will be transparent. How's that done easiest?
View 2 Replies View RelatedHow do I set the origin for rulers to the bottom left in AI CS6?
View 2 Replies View RelatedIs it possible to flip the ruler in Y so that 0 is the bottom instead of the top?
View 2 Replies View RelatedI am trying to make my first blurb book in LR 4.3. The type on the spine is going left to right instead of top to bottom. How can I change that?
View 1 Replies View RelatedI have blocks forming a column, and I need to allow the user to select the top block of the column but return the bottom left corner of bounding box of the bottom block in the column.
(DEFUN NXT-INSPNT (/ BLKLST CURENT CUROBJ IDX IPNT MCMD NENT SEL SS VENT) (PROMPT "
>> Pick the Category HEADER to add note:") (SETQss nilss (SSGET ":E:S" (LIST (CONS 0 "INSERT"))) )
(IF ss (PROGN (SETQ sel (ENTGET (SSNAME ss 0)) iPnt (CDR (ASSOC 10 sel)) )
(princ iPNT) (setvar "attreq" 0) (VL-CMDF "-INSERT" "LEG-NOTE" "S" 1 iPnt 0 PAUSE)
[Code] ....
I'm not exactly sure where my code is failing but I get the following error.
error: AutoCAD.Application: Null extents
I am working in AutoCAD 2008 on a subdivision plan that has several sheet layouts. The roads in the subdivision are dimensioned and have a pavement hatch. In one of the layouts, however, we want to turn off the dimensions, but leave the hatching. When I freeze the dimensions in that viewport, the pavement hatch is left with holes wherever the dimension text had been.
Other threads had suggested going through Hatch Edit > Remove Boundary > Select all the "island" boundaries. When I select the hatch, though, no boundaries show up around the holes left by the dimension text.
Is there any way I can turn off dimensions in one layout without leaving holes in the hatch?
Yesterday, I went into my presets folder because I was searching for a particular brush, and I noticed a little grey overlay icon with a white line in a 45 degree angle. The little icons sit on top of the presets icons, and they are located to the bottom left hand corner. I tried to search what that means, with no luck. Just in case, I even checked everything with my antivirus, but it doesn't seem to be a virus. What is that? (I'm running Adobe CS6, in a Windows 7 Ultimate, 64 bit pc)
View 8 Replies View RelatedI want a gsm to duplicate the selected object left, right, top & bottom sides
View 2 Replies View RelatedI want to extract all the texts in a illustrator file to a txt file. which could be done like this:
var docObj=app.activeDocument;
var tfObj=docObj.textFrames;
var myTextFrames = [];
for(var m=0; m < tfObj.length; m++){
myTextFrames.push(tfObj[m].contents);
}
But since the text frames were extracted by create order, not by layout, I want to ajust the oder from top left to bottom right first, then export.
I thought it could be done by selecting all the text frames first, then sorting the selection orders by loop. But I don't know how to select all the text frames, and not sure whether this is the right way...
How do I get the flag/star rating system back in the bottom left of LR4?
View 2 Replies View RelatedZero point.JPG
When a new page or document is created, by default the zero point is set at the bottom left of the page. Is there a way to set it to another point like top left so that all new documents open with it set that way. (top left)
how to restore the Color Eyedropper tool at the bottom left corner for some reason it completely disappeared.
View 8 Replies View RelatedPer the attached exhibit, how to get the plot border to cover the entire sheet border instead of just the bottom left corner.
View 1 Replies View RelatedI need to remove the person at a bottom right corner of the picture. Need replacing him with a floor and walls.
View 9 Replies View RelatedI have a series of sheets, each with two viewports to show two plan views of a long road alignment. I arranged them to read bottom to top, as it goes up stationing, as we do with cross section sheets, but have been told by an outside reviewer that the sheets are confusing and should read top down.
How would you arrange them?
I need to mix left to right and right to left (hebrew) text in a textbox. How can I do that? If I copy/paste hebrew text the text is inserted as if it was left to right, that is: reversed. Can I somehow work around that?
View 2 Replies View RelatedI just bought Photoshop CS6 and it seems that it isn't working properly. I run Windows 7. The left click and left alt are not working. The buttons work perfectly on other programs.
View 1 Replies View RelatedDrawing A has a grid system Xref-ed into it. It also has a block reference in it, repeated in various places throughout the drawing.
I Xref-ed the grid into the block to check something, and now I can't get it out. This means that the grid now repeats all over Drawing A as well and is generally being a nuisance.
If I try to unload the Xref within the block, it unloads it in Drawing A too. If I try to detach it from the block, it returns this message: Xref [Xref name] has multiple references. Not detached. If I try to detach the Xred from Drawing A, it returns the same message.
How do I unload the same Xref that occurs in a block in a drawing, and in the drawing itself, independently of each other?
My annotation scale tab is no longer showing on the bottom right of my screen. Everything is checked when I right click on the bar.
View 3 Replies View RelatedI drew a cylinder and now I need to delete its top and bottom. How can I do that?
I used Draw - 3D Modeling - Meshes - Primitives - Cylinder to create the object. And after that I'm lost, because most of the tutorials online are for Windows based CAD, but I can't find same commands on my Mac.
I have multiple pages I want printed. So I click on my "quick view drawings" on the bottom right.I then click on "Publish".It says that my project is publishing in the background.This doesn't change. the publishing icon keeps moving and it looks like it is working but this will go on for hours, not advancing pages.
This used to have Autodesk Autocad 12 and it worked fine.
I would like to decrease the gap between the bottom of text and the line added when using the underline (%%U) command. Any way to do this?
View 1 Replies View RelatedI've just discovered my Command Line Box at the bottom of the screen is missing in action...not sure what I did to loose it. Any COMMAND to get it back?
XP
AutoCAD 2010
Having issues with 2013, somehow switching to bottom view. Open a drawing and everything looks normal except when I look at the viewcube and I am looking up from the bottom.
Civil3D 2013
Windows 7, 64 bit
Intel i7 2600 @ 3.40Ghz
16 GB RAM
Nvidia Quadro 600
I want to make this part that bend 15 degree at 800 mm from bottom. In my attempt.
First, I bend it 15 degree.
And, make flange from Face and upper flange then I stuck with error.
