I need the x, y origin point to be in the lower left corner. In the past I was able to go into the Adobe Illustrator setting and change some code so when I double clicked in the left corner of the ruler it would switch my origin to lower left. Now there is nothing in the setting folder because this program is on the cloud.
View 2 RepliesIn AI CS6 can you change your XY Ruler origin to automatically start in the lower left of your document?
I am coming from AI CS4. In AI CS4 when you would open or creat a new document, your X Y origin would alway start on the lower left hand side.
Now when you open a new document in CS 6 the origin starts in the uper right. If I hand drag the ruler down to the lower left, the Y coordinant reads as a negative number.
Normally, when you select an object or a group of objects and you go to copy it/them with Ctrl+V (NOT Ctrl+Shift+V), AutoCAN'T will use the bottom left extents of the object(s) as the base point for what you are pasting. For whatever reason, when I select+copy+paste an object, the base point/origin/whatever you want to call it, is way off and not even near any of the objects.
How can I reset this?
I have opened an image in photoshop and when I choose "image size", it says that the image has a resolution of 72 pixels/inch ( it's a five x eight image..)
But in the bottom of image, it says 680.1K/680.1K.
What does the little grey N mean in the lower left corner of some of my desktop clips?
View 2 Replies View RelatedIt appears that the origin of objects is the center of the bounding box of the object. Is it possible to set the origin of objects to be the top left of the bounding box? It is possible to specify coordinates for paths this way.
View 1 Replies View RelatedHow do I set the origin for rulers to the bottom left in AI CS6?
View 2 Replies View RelatedIs this a bug? Why can't I reposition the grid lines from the top left corner?
Things are looking wacky. [URL]....
I did it earlier, but now everytime I try "alt-click" to make the light blue cross hairs, nothing happens. I am trying to make a gear in illustrator and this is a key componant.
View 6 Replies View RelatedAdd one rounded corner effect to a point of a segment or a shape as in indesign
View 6 Replies View RelatedI'm trying to get the position of point text from left anchor if left aligned, middle if center aligned and right if right aligned. is this even possible?
here are the keys of object I am trying to get at:
keys:
story : [Story]
contents : export me
textRange : [TextRange]
textSelection : [TextRange]
rowCount : 1
columnCount : 1
rowGutter : 0
columnGutter : 0
flowLinksHorizontally : true
spacing : 0
opticalAlignment : false
kind : TextType.POINTTEXT
contentVariable : undefined
orientation : TextOrientation.HORIZONTAL
this is what I am using to get at it:
app.activeDocument.textFrames[2].anchor[0]
am i confusing anchor point with baseline position?
I am using Corel Video Studio Pro x4 Ultimate with SP2 and I getting significantly lower audio volume in left channel for all stereo downmix streams. The problem is consistent regardless if I make an AVCHD video with background music, or create slide show form still images with music.
I want to eliminate any possible PC setup or installation issues and narrow down the problem to program itself. I have attached sample of stereo 1 KHz 0db test tone, which could be used for this test.
1. Open new project
2. Choose Settings --> Enable 5.1 Surround sound and Wide screen 16:9
3. Import to the library few pictures and 1KHz 0dB.wav
4. Place on the time line pictures (I used 5 sec duration for display and 1 sec cross-fade transition)
5. Add 1 KHz 0 dB.wav to the Music track
6. Select Share tab --> Create Video file --> Custom
7. Choose MPEG Transport Stream .m2ts
8. Select Options --> General 1920x1080 --> 29pfs --> upper field first
9 Select Compression --> Quality 100% --> Dolby Digital Audio --> 3/2 (L,C,R,SL, RL) --> 448 kbps --> OK
4. Name the file and save it.
5. Play rendered file on 2 speaker system (TV or PC)
Playing 5.1 surround sound movies on 2 speaker (i.e. stereo) system will likely force to play Stereo downmix stream only from 5.1 sound. You then should be able to observe that the left channel volume is reduced by -14 dB. (at least this is what I get) which causes significant stereo balance shift.The same test can be done with music files, but if you want to measure the volume drop, test tone is the best way to quantify it.
This may be a silly question but what is the big A in the upper left corner?
View 6 Replies View Relatedwhat are the 2 gray boxes in the upper left corner of my documents? are they new in ps7? one has the number one in it and the other looks like an envelope.
View 2 Replies View RelatedI've been using photoshop CS6 since it came out of beta, and I've been happy with 99% of the interface changes, except for some of the the new tool cursors which now have arrows in the upper left corner. I've been meaning to post this a while ago, but it seemed that the forums were offline.
One example is the crop tool, but what mainly hinders me are the lassos and paint bucket cursor icons. Is there any way I can replace those with the original ones from cs5 and prior?
When you pick up a tool, and it has an icon of an object (i.e. a lasso), your instinct is to look at and use the tip of that object, not some little black arrow in a corner.
For example, you wouldn't want to have an arrow next to your text cursor, or next to your magic wand cursor, would you? You'd want to use the tip of the wand.
I'm not sure what part of the user community suggested these little arrows be added on those tools, but I find it to be a bad design idea. And it's an annoying choice imo, beacause it doesn't make sense from an interaction design point of view, and not because it would be hard for me to get wrid of my habit of using the tip of the lasso, and to get used to the arrow instead. It's bad, because now, there are two conflicting pointers in the same tool: the icon tip and the arrow tip.
[EDIT] I'm sure people will say that they prefer the new design, arguing about "design consistency" and whatnot. So this is why I ask if there's a way for me to replace the cursors in my photoshop, not everyone's.
(XDPX9) - Can't seem to get it to react. I followed both variations of how it's done...
1. Drag the adjoining X & Y at the top left corner of the ruler.... dragged down. Nothing.
2. Page properties - Grid and ruler tab... changed the Y Coordinate. Nothing again.
Made sure 'page' is not 'locked'. All pages same size. Been at it for over an hour and have decided I'm either missing something or maybe I found a bit of a bug?
My page is 'custom' size.... Landscape 1000X600
Trying to draw a titleblock for a college assignment and its supposed to start at 5,5 but that is in the middle of the paper (A3 setup). 0,0 is somewhere in the middle too - how do i get 0,0 to be the bottom left corner of the paper in paperspace??
View 9 Replies View RelatedI recently found out about the 3D features in Photoshop and I started to experiment with them. I've created some nice extrusions. However, when I try to start the render of my current project, it waits a short while and then continues on rendering the rest of the image, leaving a grey box in the upper-left corner. When I zoom in, I can see that the texture is in place and the box starts at the border of the 3D object, not at the border of the image.
I'm running Windows 7 Home Premium x64, Intel i5-2430M (2.4 GHz), nVidia GeForce GT555M (1 GB) and 8 GB of RAM. I've rendered my other projects successfully with the same settings (all highest quality, though very slow). Could this possibly be a bug in the software, is it an error of mine or is this 3D document just irrenderable?
Yesterday, I went into my presets folder because I was searching for a particular brush, and I noticed a little grey overlay icon with a white line in a 45 degree angle. The little icons sit on top of the presets icons, and they are located to the bottom left hand corner. I tried to search what that means, with no luck. Just in case, I even checked everything with my antivirus, but it doesn't seem to be a virus. What is that? (I'm running Adobe CS6, in a Windows 7 Ultimate, 64 bit pc)
View 8 Replies View RelatedThe dialog box for "Adjust/Highlight-midtone-shadow" has become "locked" at the very top-left corner of my monitor screen.
It's top "grab-bar" and "shadows-value-field" are outside the edges of my monitor.
I cannot "grab" it with my mouse cursor to relocate it. How can I move it into the visible area of my monitor?
Is there a way for the elevation of surface to be shown in the bottom left corner along with the easting and northing as the cursor tracks over the surface? currently only the easting and northing track with the cursor the elevation remains 0.00
View 4 Replies View RelatedMy stats are being show, but the text is yellow....very difficult to see against a light background. I haven't been able to find a place to change the text color.
View 1 Replies View RelatedI have a banner heading that is more or less outlined text. I want to give all the corners a rounded corner and at the moment would just do it all by hand, one at a time. So I want to go from a to b:
But I would like to find an easy way to make all corners the same diameter regardless of the angle too.
When I add a image to my background my background shrinks to the top left hand corner of canvas. I have been trying to do this every night for a week now and held out posting until I gave up. Also when I try to paste an image I get a message saying I don't have enough memory (I have 20 GB of memory free). I tried to find Pleska plugin for adding from file but could not find it.
View 8 Replies View RelatedHow do I remove the white img. number on the top left corner of my images?
View 1 Replies View Relatedim having an issue with my site Headphone Styles, I'm trying to extract the logo at the top left hand corner and edit in photoshop. if this image file extension is compatible with photoshop?
View 4 Replies View RelatedI lost the text window that is normally docked on the bottom of the AC screen. I searched and found that F2 brings it up, but I can't find how to have it permanently docked in the bottom left hand corner, where it normally resides. I'm using AutoCad 2002.
View 5 Replies View RelatedExporting my photo’s from iPhoto to the desk top and then importing to Photoshop Organizer 11, ALL photo’s show “Missing File” icon (?) in the top left corner when I eliminate photo’s from iPhoto. Why do I have to keep photo’s in iPhoto? Is there a workaround?
If I import iPhoto photo’s directly within Organizer I loose photo information.
how to restore the Color Eyedropper tool at the bottom left corner for some reason it completely disappeared.
View 8 Replies View RelatedI draw square. The 1st point and last points are left-top and finally set 5 points.The direction is clock-wise and made closed path.To get smooth-curved polygon shape, I used API 'PointsToCurves'.But, the first and last points are connected by cornered (not smooth) point. Here's result.
Maybe, I must set that square is closed path, to API, but it seems to be no parameter to set.So, I want to know how to get smooth corner shape every corner.I use SDK CS5.
I have blocks forming a column, and I need to allow the user to select the top block of the column but return the bottom left corner of bounding box of the bottom block in the column.
(DEFUN NXT-INSPNT (/ BLKLST CURENT CUROBJ IDX IPNT MCMD NENT SEL SS VENT) (PROMPT "
>> Pick the Category HEADER to add note:") (SETQss nilss (SSGET ":E:S" (LIST (CONS 0 "INSERT"))) )
(IF ss (PROGN (SETQ sel (ENTGET (SSNAME ss 0)) iPnt (CDR (ASSOC 10 sel)) )
(princ iPNT) (setvar "attreq" 0) (VL-CMDF "-INSERT" "LEG-NOTE" "S" 1 iPnt 0 PAUSE)
[Code] ....
I'm not exactly sure where my code is failing but I get the following error.
error: AutoCAD.Application: Null extents