Illustrator Scripting :: How To Get Position Of Point Text From Left Anchor
Jun 9, 2012
I'm trying to get the position of point text from left anchor if left aligned, middle if center aligned and right if right aligned. is this even possible?
here are the keys of object I am trying to get at:
Is there any way to find a specific point on a path, that is not necessarily an anchor point?
What I'd like to be able to do is tell Illustrator "Give me the coordinates of the point that's exactly at half of this path's length" or "... exactly 25% ...". And if that's possible, can I somehow add an anchor point to that point, or cut the path at that point?
I'm trying to nudge the anchor points on an object randomly (to get an informal look). (I know some Effects do this already.)
Maintaining corner points is no problem - you just set the direction handles to the same coordinates as their anchor.
But I can't nudge a smooth point in the way I want to, which is to move the anchor but maintain the direction handles in exactly the same relation to their anchor as they had before. That is to say, they should remain smooth points.
My script calculates the difference between 'before' and 'after' positions of the anchor, and applies that difference to the direction handles… but in practice the smooth points are converted to corners, because the direction handles don't maintain their relation with the anchor.
var docRef = activeDocument; var objects = activeDocument.selection.length; var cShift = prompt("Point shift (pt)",5); // loop through all objects for(var count=0;count<objects;count++)
I want to extract all the texts in a illustrator file to a txt file. which could be done like this:
var docObj=app.activeDocument; var tfObj=docObj.textFrames; var myTextFrames = []; for(var m=0; m < tfObj.length; m++){ myTextFrames.push(tfObj[m].contents); }
But since the text frames were extracted by create order, not by layout, I want to ajust the oder from top left to bottom right first, then export.
I thought it could be done by selecting all the text frames first, then sorting the selection orders by loop. But I don't know how to select all the text frames, and not sure whether this is the right way...
I'm currently running AI CS6. In previous releases, when I wanted to start entering text at a certain point (with the regular type tool) I would position the I-beam at the vertical line where I wanted to start, and with the little horizonal line of the I-beam on the horizontal line where I wanted to start, and click. But in CS6, that click seems to position the text on the left-most dotted line surrounding the I-beam, rather on the I-beam itself. Is there some parameter I can set so that the I-beam determines the starting point of text? Or do I just need to adjust my thinking to a different way?
Having a lot of issues manipulating points on paths in Illustrator CC - this is a fundamental feature of creating vector graphics and it's very annoying I'm paying for this and it's just not working. Eating up a lot of my time simply because I can't select or convert or add the anchor.
How do I change the position of anchor points on my line, at the moment the anchor points are in the middle of my line, I would like the anchor points on the inside edge of my line so I can make my cut cuides more accurate. I am using illustrator CS6 cloud.
I am trying to add an anchor to the left and right sides of a rectangular path at the exact same height. The easy method seemed: drag a guide to the right point and add the anchors at the intersection. But this is adding the anchors to the guide rather than the path "underneath" the guide? How can I place the anchor on the path?
I have a shape in illustrator CS6 that I'm trying to edit. When I try to click on a point with the Delete Anchor Point Tool nothing happens however I am able to select the point using the Direct Selection Tool and then remove it using the "Remove selected anchor points" option in the Control palette. Same issue with trying to use the Convert Anchor Point Tool.
I am trying to (among other things) move a pathpoint that was added on a pathitem rectangle. The add of the pathitem goes well, the add of the pathpoint to the rectangle is fine, although when it it is "added" it picks some arbitrary position, hence the need to change the position, starting with the anchor.
I typically write in VB.NET (2013), as I am doing here. Using Illustrator CS6.
In VBScript, documentation shows: newPoint.Anchor = Array(75, 300)
Using that syntax, I get a pre-complier error in VB.NET, as "Array" is a type and can't be used as an expression.To create an inline array in VB.NET, I would normally use:
newPoint.Anchor = {75, 300} Using this syntax, I get a runtime COM-exception error.
All I am trying to do is move an anchor from one location to another using vbscript. I have searched everywhere and scoured the scripting references but I have not been able to figure this out as of yet.
I am able to select anchor points without an issue....moving those points seems to be a problem.
Can the add, delete, convert indicators be moved from the right side of the pen curser to the left of the curser for right handed users? The indicators are obscured by the pen when using the pen in the right hand on the Wacom Cintiq. Option preference for right or left hand is desired.
In Illustrator I have a path, I choose the add anchor point tool and am positive I have the cross hair exactly on the path but it keeps telling me I can't add the anchor point.
I've noticed that in Illustrator CC (17.1) the pen cursor doesn't automatically let you add or delete an anchor point anymore, when in Pen tool mode (P). It used to be an automatic feature in CS5, where a + or - sign would show up whenever I hovered over a selected path with the tool.
I am wondering if there is a way to add/remove/redistribute anchor points on a compound shape so that there are evenly spaced anchors along the outline of that shape.I am aware of the "add anchor points" command. But that adds a new anchor at EVERY midpoint between two anchors. It doesn't smartly calculate where to add and where to avoid adding anchors.
In PS you can drag the center anchor point of an object anywhere within the object or canvas, allowing you to rotate around that custom location versus the dead-center of the object.
Is there a way to somehow define a shortkey to the process of removing our last anchor point's unused handle?
I am talking about this:
To be able to make a sharp corner I have to manually click on the anchor point so the handle which is still unused gets deleted. The anchor points are particulary small and the don't scale when zooming so sometimes it's just hard to click them and therefore I would love if I could automatically remove the handle with a key/key combination.
I have made a curved path in Illustrator CS6, just a simple stroke (left in picture). Is there an easy way to round the corner of the end of it? Something like the image on the right? (I just tossed a circle over top to give an idea)
I have a shape I made with the pen tool, and now I want to align one anchor point of the shape with the middle of a rectangle. How can I do this? It doesn't seem like I can do what I do for objects, which is select both objects, click the object I want to align to, and hit align. If I'm not describing this properly let me know and I can try to clarify.
I have recently upgraded to CS6 from CS2. I do a lot of digital inking in Illustrator as part of my job. In CS2 I would create a simple tapered brush using 4 anchor points. When I would draw a brush stroke say with two anchor points, and then expand that brush stroke. Illustrator CS2 would convert the outlined tapered brush stroke back to the the original 4 anchor point path that I had originally created with maybe one extra point if the stroke curved drastically. Now is CS6 illustrator creates that same expanded brush with 9 to 12 anchor points in the path. This makes the program completly useless for my task. Is there anyway to correct this?
I would like to select an anchor point and adjust it so that it creates a perfect right angle. How can I do that?
Imagine some closed, filled shape, made up of a dozen anchor points. I would like to select one of those anchor points (a corner anchor point, not a smooth anchor point), and adjust it (built-in function? script?) so that it create a perfect right angle (90 deg.). This essentially would mean moving it to just the right spot so that the lines connecting it to its two neighbouring anchor points would form a right angle.
do not assume that the resulting right angle would necessarily be orientated along a North-South axis, or any other rational compass direction.
Are there any options to specify the "positions" etc. of handles of anchor points in order to be able to shape a little more precise for example for an image that has to be identically left and right shaped?
I'm drawing a Bell (church bell) at the moment and drawing one side first and duplicating and reflecting it works fine to get the perfectly symmetrical shape, but when I want to adjust some handles or shaping, I would like to do this identically left and right without constantly having to adjust one side and duplicate it etc.
script that would sample the underlying color of anchor points in a selected gradient mesh and apply it to them? I was just thinking of ways to speed up the process of creating a vector drawing based on a picture so that all you would have to do is model your mesh and then let the script apply the colors.
In Illustrator CS5 my anchor point handles are snapping to specific angles,which I don't want. I have to turn off Smart Guides to freely adjust the handles.
Under preferences, Smart Guides, I turned off the custom construction guides, but even this did not correct the issue. I love using Smart Guides and I thought there were just in face that 'guides' and provided no snapping.
I also tried turning off 'snapping to point' to see if that was creating an issue, but no dice.
I can provide my system settings in case:
Mac OSX 10.8.4 16 GB memory Illustrator CS5
Wanted to ensure I was not missing a feature I couldn't find or research before trying to reset my preferences.
While using the pen tool, moving the current anchor point by hold down the spacebar, is a great time-saver and I use it frequently. But I find it a little frustrating that, when closing a path, the "spacebar" feature does not work. Instead, the apposing direction point goes whacko. Is there an alternate keyboard shortcut to overcome it? Even though I "know" it won't work, I seem unable to resist holding the spacebar to fine-tune the last anchor point.
I'm wondering how it's possible to drag only one handle out of an anchor point. Sometimes I have a path and some anchor points have only one handle dragged out. Now I want to adjust the other handle _without_ changing the already positioned handle. Is this even possible?
The "convert anchor point tool" does allow me to drag out handles, but only both at a time. This always results in changing the already positioned handle's position.
In an earlier Illustrator CS version, i was able to display any Paths' anchor point Numbers or label. But in CS6 with both "Anchor/Path Labels" enabled in Prefs. > Smart Guide section and in View > Smart Guides, no Point Numbers are displayed.
How to display each paths anchor point numbers or label?
Is it possible to find intersection poit of the anchor point and any point on path?
Like on a picture, there are an anchor poit from a line, which intersects arc path, and I need to find intersection poit on the arc (can be line) path. Thus I can do further processing for arc after intersection - change position, set color etc.
I suppose I need to divide that arc path and that will be the best way, but all I need for this moment extract point before intersection and after and process in our custom preview. Is there way to find this intersection?
