how to make a data shortcut to a pressure network? Is this feature even available? It seems odd that this feature would be left out of C3D 2013 when it is critical to plan production.
View 1 RepliesI've been really excited to know Pressure Network modelling is finally coming to Civil 3D with 2013 release. However I've got no clue why any pipe data won't display in Profile View.This makes absolutely no sense in pressure network profiling since you can't output any pipe data to profile view tables. Note pipe data outputs great for regular Pipe Network profile views.
Another thing I'm disappointed in is no ability to output Uphill Tangent and Downhill Tangent for pressure network pipes. Both values are given in Vertical Geometry Band type. Thus they are being obtaned from Profile but not Pressure Network Pipe data. Since in Pressure Networks it's only a couple of pipes that are being curved to match surface line it's impossibe to get Tangets. Sure you can duplicate surface profile and get required data using Vertical Geometry Band type. But it make no sence since it's too much hustle.
I'm quite sure I'm missing something here. Probably there's a way to add required data styles to Band types? Or modify Label styles Contents data sources?
I have run into a problem with my Pipe Network data shortcut. When I am in a drawing that is referencing my Pipe Network not all of my structures are showing up. I confirmed this by going to the prospector tab/pipe networks/storm/structures. According to the list It is obvious that not all of my network structures are making it to the new drawing. I've double and triple checked the source drawing to make sure that all the structures actually exist and they do.
I've deleted the data shortcut and recreated it and still nothing.
I'm trying to find out what could be the cause of sturcture styles in a Pipe Network Design Drawing resetting to default styles when I Data Shortcut the design into my Sheet? (I.e. I've got gate valves, fh's, and plugs in my design file, but when I data shortcut them into my sheet they are all come in as null structures) Not Cool!
I'm using the same template that contains all the same parts/styles for both design and sheet.
After spending at least 15 minutes on this subject, I don't see an easy way to set up a PVC pressure network. Do we have to re-invent the wheel?
View 5 Replies View RelatedI'd like to know if the Pressure Network API in Civil 3D 2013 have been exposed via .NET or COM.
View 2 Replies View RelatedIs there some way a person can export the pressure network in c3d 2014 to a 3d model (3ds,revit,IMX)? IThis can be done with the sewer network but no joy on the pressure network. I would really like to use Infrastructure modeller to assist in the design of our project.
I really like the new tool for pressure networks, but the fact that I cant export a 3d model.
I have created a pressure pipe network (Plan view) from own created pipes and fittings, try to create an alignment from the network but C3D tells me that the selected network part has no connected parts?
How would I connect the network in order to create an alignment? (the pipe network has got a command to do that)
I am trying to create a pressure network with 1.8m cover. I haven't created one before but I've read up and understand how to do it. I have created a new network and referenced it to a surface and alignment, using the default parts catalog, and changed cover to 1.8m. I pick pipes and bends or pipes only and start to draw. It asked for an insertion point and I click one and a blue line, attached to my insertion point, follows my curser. It asked for another point and I click in another place but when I click that second point the blue line disappears and a new one follows my curser attached to the new point I just clicked.
View 1 Replies View RelatedI am trying to add a 20"x6" tee to a 20" force main pressure pipe network and Civil 3D simply refuses to do it. It will cut the pipe, but won't add the tee in plan edit. When I try to add a tee to the end of a pipe, it doesn't show up. I can, however, add a 24"x6" tee to my 20" di pipe, which of course doesn't even make sense.
Also, I am having a problem with vertical bends in profile drawing correctly. It works fine when the profile is running left to right, but where I have to reverse the profile they cross over onto themselves (see attached png).
I find myself spending more time fiddling with the pressure network tool than it would take to just draw it manually.
I'm trying to use pay items in a pressure water network I'm building.
I can't find a pay item that fits for the fittings.
Are fittings normally included in the LF of pipe or are they assigned their own pay item?
Civil3D 2014 SP1
Win 7 Professional - 64-bit
HP Z400
Xeon W3550 @ 3.07Ghz
24GB of RAM
Nvidia GeForce GTX 760
Using the Pressure Pipe Network in Civil3D 2013? I just recently began developing an Apputenace library for all the parts we use that were not included with the program. I have run into a few big issues that could prevent our firm from using this potentially useful tool. One issue, does the PPN posses the ability to create structures like manholes? This could be a really break point for using it to do a sewer line. Another, how well does it interact with multiple surfaces? If I have two surfaces butted up to one another how to a get a PPN from point A on surface 1 to point B on surface 2 and have that PPN respond at the correct bury depth while creating the correct fittings? As I experiment more this this tool I feel as if there are way more questions about what it can and can't do compared to what a regular pipe network does.
View 1 Replies View RelatedI downloaded the C3D 2014, and trying it. When i discovered the new function, i try to draw a pressure pipe network.
After i was take the design, there is no any object in the model space. Nothing.
There are a full list of pipes and structures in the tool space tree menü. When i just click the network name and select it, i get all of information about the planned network but i can't see any object, lines or other in the model space. All layout viewable, What is the problem with it?
Put together a pressure network and actually plotted it out for a project? Are the fittings and appurtenances even readable? I have a network setup on 40 scale plans and when plotted out, you can't even tell what a recuder is compared to a valve. Tees are obvious but thats only because of the branch pipe coming off of it. Our company uses the old basic symbols that are blown up big enough that dimensionally, they are not correct but visually they look really nice.
View 9 Replies View RelatedSo, I really like the ability to have a pressure network pipe follow a surface but, what if I no longer want the pipe to follow the surface? Is there any way I can get rid of all the extra grips that are added to the pipe in the profile? The only way thing I've come up with is to delete the pipe and recreate it.
View 1 Replies View Related(Using Windows 7 Professional - 64 Bit; Civil 3D 2013)
No changes have been made to the pressure network catalog (default, as installed and located in the default location on each machine).
I begin by setting the pressure network catalog and choosing any of the sqlite database files in a new blank drawing. In the "Create Pressure Pipe Network" dialog, I try to edit the parts list, but an error shows up and says "This Pressure Parts List references a catalog that cannot be found. As a result, you may be unable to add parts to the network.". Everytime I set the catalog, Civil 3D seems to immediately forget which sqlite file was selected. This problem has been encountered on multiple workstations in our office. Only 2 workstations retain the catalog selection and will allow a pressure network to be created with no issue concerning the selected catalog.
When I click on a section view and go up to the ribbon to "samplr more sources", my pressure network in not in the list to add.
View 1 Replies View RelatedWe recently installed C3D2013. We were using our profile from 2012. When we tried to set the Pressure Network Catalog and then edit the Standard Parts List, we get a message that it references a catalog that can't be found. I have seen this on other posts.
I changed the profile to the out-of-the box profile, and now it will let me edit the Standard Parts List. When I drag the parts list in the _AutoCAD Civil 3D (Imperial) NCS into my original drawing, it loses the material.
What element of the profile allows it to set the Pressure Network Catalog and have it work? Does the Parts List in the template play any role in the interactivity between the Catalog and the Parts List?
Also, if I copy the Pressure Network Catalog folder from the C drive to a network drive, I again get the message that it references a catalog that can't be found. Can the catalog not be moved?
In plan I show a pipe main as a thick line with a certain linetype whether it be for storm, sanitary or water. I have acheived this by selecting only pipe centerline under the display tab in the pipe style editor and then under pipe centerline options specifiying a width for the pipe. I don't see the centerline options for a pressure network pipe.
View 1 Replies View RelatedI was wondering if you can create rules for a pressure pipe network similar to the rules that you can create for a pipe network. I would like to create a cover and length rule for my system. So far I saw that you can set a cover before drawing out the pressure network but I do not know how to edit that after the pressure pipes are drawn in.
View 7 Replies View RelatedI know storm and sewer design possible. But I cannot know if possible to design the pressure network pipe layout?
View 9 Replies View RelatedUnder the Settings tab in the prospector go to Pressure Network/parts list/ It allows you to do things with DIP but does not give options for PVC.
View 1 Replies View RelatedI was so excited to hear about the new pressure pipe networks that I had to get into the software. What I have found is both promising, and a little bewildering. The promising aspects are that the pressure pipes appear to act and function effectively, and in a manner consistent with real world design that is easy to understand and use. Kudos to Autodesk!
That being said, I do have a couple of complaints. First, the pre-loaded fitting and appurtenance libraries are very limited when it comes to sizes and materials that are more commonly found in the land development arena I work in (8" PVC is our bread and butter). Hopefully, additional resources are forthcoming - they usually are.
Second, and more importantly, I can't figure out a way to data reference a pressure pipe network. If we can't data reference the pressure pipe network, then we really can't use them at all, which would be very disappointing.
How to set certain Civil 3D data folders to a network location. For example how can I set my default QTO categories, pay item and formula file paths to a network location?
I've figured out how to set Survey Database and Pipe Network Parts Catalog paths. It seems there should be some general configuration settings dialogue for all these paths somewhere. Is there? If not, is there a list of commands for configuring all the path settings?
This is for standalone clients not using Vault.
i am currently using civil 3d 2012. I am having issues with pipe networks and my data shortcuts. when i data shortcut a pipe network into another file, sometimes my structures just disappear after saving and closing out, then reopening - like they were never there.
View 4 Replies View RelatedWhen copying data from the Pipe Network Vista in C3D 2013 and placing in Excel I cannot create formulas. Have tried changing the format and it will not accept the changes.
View 1 Replies View Relatedis it possible to lock an alignment to a pipe network, so that if you move a structure, the alignment moves with it?
along those same lines, when you create an alignment from a pipe network, is it possible to auto assign the reference alignment to the pipe parts, so that labels come out correctly?
I have a major error currently affecting my work that I need to resolve ASAP. I'm using C3D 2012 64 bit with Windows 7. I have multiple model drawings that I have created pipe networks and view frame groups in, and using those model drawings I have created plan and profile sheets from the view frames. I created data shortcuts of all my pipe networks and referenced the pipe networks into my sheet drawings. In the sheet drawings I drew the network parts into the profiles, and everything displayed exactly as it was supposed to. No issues at all.
Now fast forward about a month. Out of the blue one day I open one of my sheet drawings to perform some edits and notice that the pipes that were previously displayed in the profile views showing inside and outside walls with the centerline turned off now show up as a simple line. I haven't changed any settings at all. I looked at the properties of the pipes, and they seem to have all ignored their asigned diameters- the pipe data in the referenced network now assumes all inverts & crowns are the same elevation as the centerline.
Long story short, I have gone so far as to completely reinstall the program and restart the drawings, but the more I edit the oringal network the worse the problem gets. Now all of my structures are attaching themselves to the surface profile instead of the pipes, and the entire network gets put onto my current layer rather than the layers I assign in the Create Pipe Network Reference dialog box.
It happens to any drawing I try to open on this network- even ones created by third parties that I haven't edited. And the problem resides in the drawing because anyone I send the drawings to has the same problem. It will even crash the entire program sometimes when they try to open my drawings.
Civil 3D 2012 SP3 - Windows 7 64 bit - Intel Core i3-2120 - 8 GB Memory
I want to import a number of SHP files into Civil 3D for design - road centrelines, boundaries, creek centrelines, etc. however when I import them into Civil 3D (_AeccImportGISData) it only allows me to create a Pipe network. the dialog that opens automatically assumes I want to import a pipe network.
Is there another way to import this information without assigning parts.
I want to be able to repath a data shortcut I have on my drawing to a file thats on my C: drive, how do I do this? Its just for this one drawing I want to do it with, so the Data Shortcuts Editor is no good to me.
View 4 Replies View RelatedHow to export Civil3D pipe network with Object Data as Shapefile.
Any code snippets?