AutoCAD Civil 3D :: How To Set Data Folders To Network Location
Nov 5, 2012
How to set certain Civil 3D data folders to a network location. For example how can I set my default QTO categories, pay item and formula file paths to a network location?
I've figured out how to set Survey Database and Pipe Network Parts Catalog paths. It seems there should be some general configuration settings dialogue for all these paths somewhere. Is there? If not, is there a list of commands for configuring all the path settings?
We recently updated our servers and I am having trouble accessing files through Autocad. For example, if I try to open a drawing or attach an xref I select the drive and can see the folders in it but can not open any. I have no problem opening these folders through windows explorer so I do not think it is a permission issue. I am the only one in the office running 64bit on windows 7 (everyone else is on xp) We are using Civil 3D 2010.
I know I can go into the AeccSetNetworkCatalog command and set the file path but I want to do it pragmatically. Is there any way to do this? If so I don't know where it is located?
i am currently using civil 3d 2012. I am having issues with pipe networks and my data shortcuts. when i data shortcut a pipe network into another file, sometimes my structures just disappear after saving and closing out, then reopening - like they were never there.
I have run into a problem with my Pipe Network data shortcut. When I am in a drawing that is referencing my Pipe Network not all of my structures are showing up. I confirmed this by going to the prospector tab/pipe networks/storm/structures. According to the list It is obvious that not all of my network structures are making it to the new drawing. I've double and triple checked the source drawing to make sure that all the structures actually exist and they do.
I've deleted the data shortcut and recreated it and still nothing.
When copying data from the Pipe Network Vista in C3D 2013 and placing in Excel I cannot create formulas. Have tried changing the format and it will not accept the changes.
how to make a data shortcut to a pressure network? Is this feature even available? It seems odd that this feature would be left out of C3D 2013 when it is critical to plan production.
is it possible to lock an alignment to a pipe network, so that if you move a structure, the alignment moves with it?
along those same lines, when you create an alignment from a pipe network, is it possible to auto assign the reference alignment to the pipe parts, so that labels come out correctly?
I've been really excited to know Pressure Network modelling is finally coming to Civil 3D with 2013 release. However I've got no clue why any pipe data won't display in Profile View.This makes absolutely no sense in pressure network profiling since you can't output any pipe data to profile view tables. Note pipe data outputs great for regular Pipe Network profile views.
Another thing I'm disappointed in is no ability to output Uphill Tangent and Downhill Tangent for pressure network pipes. Both values are given in Vertical Geometry Band type. Thus they are being obtaned from Profile but not Pressure Network Pipe data. Since in Pressure Networks it's only a couple of pipes that are being curved to match surface line it's impossibe to get Tangets. Sure you can duplicate surface profile and get required data using Vertical Geometry Band type. But it make no sence since it's too much hustle.
I'm quite sure I'm missing something here. Probably there's a way to add required data styles to Band types? Or modify Label styles Contents data sources?
I have a major error currently affecting my work that I need to resolve ASAP. I'm using C3D 2012 64 bit with Windows 7. I have multiple model drawings that I have created pipe networks and view frame groups in, and using those model drawings I have created plan and profile sheets from the view frames. I created data shortcuts of all my pipe networks and referenced the pipe networks into my sheet drawings. In the sheet drawings I drew the network parts into the profiles, and everything displayed exactly as it was supposed to. No issues at all.
Now fast forward about a month. Out of the blue one day I open one of my sheet drawings to perform some edits and notice that the pipes that were previously displayed in the profile views showing inside and outside walls with the centerline turned off now show up as a simple line. I haven't changed any settings at all. I looked at the properties of the pipes, and they seem to have all ignored their asigned diameters- the pipe data in the referenced network now assumes all inverts & crowns are the same elevation as the centerline.
Long story short, I have gone so far as to completely reinstall the program and restart the drawings, but the more I edit the oringal network the worse the problem gets. Now all of my structures are attaching themselves to the surface profile instead of the pipes, and the entire network gets put onto my current layer rather than the layers I assign in the Create Pipe Network Reference dialog box.
It happens to any drawing I try to open on this network- even ones created by third parties that I haven't edited. And the problem resides in the drawing because anyone I send the drawings to has the same problem. It will even crash the entire program sometimes when they try to open my drawings.
Civil 3D 2012 SP3 - Windows 7 64 bit - Intel Core i3-2120 - 8 GB Memory
I want to import a number of SHP files into Civil 3D for design - road centrelines, boundaries, creek centrelines, etc. however when I import them into Civil 3D (_AeccImportGISData) it only allows me to create a Pipe network. the dialog that opens automatically assumes I want to import a pipe network.
Is there another way to import this information without assigning parts.
How can I locate the Data Shortcuts Working folder? A surface exist as a data shortcut in a dwg, but the location of the data shortcut folder is unknown and therefore cannot be set in the Prospector.
my co-worker can not setup his drawing's data shortcuts. So, we tried to set the working folder. He has no real options for working folders. There is only one project folder showing for him. how to get all of the project folders to display in the set working folder dialogue so we can select the correct project, then select the correct data shortcuts. He is using C3D 2012 on a windows 7 64 bit machine. His folders have black arrows instead of plus signs. I've attached a picture. The Monterey Projects folder should display several hundred project sub folders and you can see we only have the one folder of 2916.
I'm trying to find out what could be the cause of sturcture styles in a Pipe Network Design Drawing resetting to default styles when I Data Shortcut the design into my Sheet? (I.e. I've got gate valves, fh's, and plugs in my design file, but when I data shortcut them into my sheet they are all come in as null structures) Not Cool!
I'm using the same template that contains all the same parts/styles for both design and sheet.
I have a source drawing with a proposed surface, alignment, and pipe network. When I data shortcut these objects into a new drawing, everything comes in correctly except the pipes. The inverts are incorrect. The pipes maintain correct slope, just the inverts on both ends are off. The structures they are attached to have the correct rim and sump.
I have included a screen shot of the properties box for the same pipe in the source and referenced file.
I'm at a loss. I have made sure the parts list and rules are identical in both files.
Civil 3D 2012. One structure in my pipe network is not following along when the network is data-referenced in to other plan drawings. The structure is present in the source drawing, and included in the network, along with the pipes that are connected to it. All other structures and pipes are operating fine.
I am running Civil3D 2011 on Windows 64 machine and am wondering how I go about setting up multiple working folders when using data shortcuts. I have two different projects I am working on, for which I set up surface data shortcuts, but the 2nd one I set up over-wrote the 1st folder and so now that surface is not properly shortcutted into that project. how to set this up, for I am new to the whole shortcutting game?
Civil 3D 2013 SP2 | Win 7 64-bit SP1 Intel Core i5-2500 @ 3.30GHz, 8GB Ram | ATI Radeon HD 5450
When creating my plan set, I need to data reference pipe networks into other drawings than that in which they were designed to show crossings in profile views or to separate out profiles into managable drawings. When I do this, if I have swapped a type-13 inlet for a 10' type R inlet or something during design, the data referenced pipe network will replace the 10' type R with a default inlet. Also if I have swapped a proposed 30" pipe for an existing 30" that have different styles, the data referenced pipe network will revert back to the proposed 30" pipe. how to make a data referenced pipe network reflect what is currently in the design drawing?
I have a 2011 Civil3D drawing with Data shortcuts in it. I need to replace the source drawing path of the data shortcut with another path. Is there a way to change this either manually or, preferably, programically. At some point we'll need to batch through the drawings and change this path information. Is this information is stored in a drawing dictionary somewhere? If so, where? If not, where?
Updating the .XML data files doesn't appear to affect data links already in the drawing.
I am using Civil 3D 2013. I work in an office where we have a few different flavors of Autocad (LT, MEP, regular vanilla AutoCAD etc...) and versions (2010 LT, 2011, 2012, 2013).
For the most part there isn't much inter-office drawing coordinate that has to happen, but there is the occasional project where multiple disciplines (Structural, Mechanical and Civil Site) have to share drawings.
The specific problem I am having is when I share my 2013 Civil 3D drawing with a user using 2011 MEP. He gets the typical rectangle for the proxy objects (in my case, my pipe networks for sanitary and storm drain). We've tried downloading and installing various object enablers, but there doesn't seem to be one for a 2013 to 2011 scenario. So I setup my parts to be on layers that he can just turn off. HOWEVER... the actual pipe network (not the structures, parts, labels etc... the network itself) ends up on layer 0. For this specific project, I do the old (ssget "x" '((8 . "0")) search to select all objects on layer 0, add those objects to a selection set (pselect), then in my modify objects dialog I filter for pipe networks, then change the layer to something other then 0.
While this is a workaround that works for me, what I really want to know is if there is a way that I can change the default layer that the network (again, not pipes, structures or text, the actual network) so I don't have to use the workaround. Any thoughts?
P.S. It's killing me that I had to create a new Autodesk login and now all my AutoCAD "street cred" is lost
"The source of expertise is not in the memorization of the minute details of a subject but in the thorough understanding of the fundamental concepts on which it is based."
My lead wants a group of all the tool palettes that i have created for all users to use.I have exported all of the palettes to a location on the network. I also exported the group to the same location. I had the user redirect the tool palette path in the Options>Files. The problem that i am running into is that when the users are loading up the tool palettes, they have to import each tool palette seperately then add them to a group.
Is it possible to have the tool palettes in a location on the network and have each of the users import the group only?
I'm trying to move our Appearance & Materials libraries to a network location. But I'm not quite sure which files need to be moved. I copied all the files in the folder: C:Program Files (x86)Common FilesAutodesk SharedMaterials, but when I change my project settings to reflect this location they're not available in the Appearance & Materials library managers.
I have a network of 18 computers that I currently send Network rendering jobs to whilst on the same network whilst being in the same room as them.
I would like to be able to join the network from a remote location through broadband internet, through the router on that network and submit a job to the manager and access all the files on the network from the remote machine as if I was plugged into the ethernet hub on the network.
The error is the following: "Error 1606. Could not acess network location 0." It happens after the computer specifications process. I've tried to search for solutions, but with no results at all... I've tried to track it down in registry, but also with no results.PC: LG E500OS: Windows Vista Home Edition Help?
I am working on a plugin application, in that saving Image files on a specific location by using JSX file.I have done with that but it works only with local drive.I want to save that file on my Network Share by using JSX.
Having just installed Video Studio Pro X6 on a Windows 8 laptop, I have what may be a basic question about the folders the software creates automatically on installation.
By default, installation of the VS Pro X6 software placed in my C drive's Documents folder a folder called Corel Video Studio Pro along with a sub folder called 16.0 (and, I believe, a sub folder called My Projects, though it's conceivable that I added the My Projects subfolder manually and just forgot); the 16.0 subfolder contains a subfolder called DMF_TEMP, which, in turn, contains additional subfolders. After creating just a few short movies, the DMF_TEMP folders and subfolders already contain almost 4GB of data, and I worry about the folders eventually overwhelming my internal hard drive capacity. So I have two questions:
First, will the software eventually remove the presumably temporary files stored under DMF_TEMP, thus also removing concern about taxing my internal drive's storage capacity?
Second, is it possible without loss of simple functionality to configure VS Pro X6 so that the entire Video Studio Pro folder, along with its 16.0 and other subfolders, resides on an external hard drive, with much larger capacity?
I have a fairly large catalog with about 20 album categories, each with between 5 and 15 albums, totalling about 20,000 photos, all currently residing on my laptop. I need to move everything to a networked drive but can't find how in the Elements help system.
