I drew 2 circles with ttr command (1 and 2). The problem is when I try to trim them to remove the part I don't need, it doesn't work cause the circles 1 and 2 aren't stick with the borders as they should. At the 4 red circle points, if you zoom you'll notice they don't stick the border, never faced this problem before (usually I cut the part I don't need without problem). I've done regen/all but doesn't seem to fix that problem.
View 9 RepliesI posted a file drawing of a basic symbol.....how do i trim the circle segment between the 2 red lines?
I have drawn this symbol in space....should i be anchoring it to the 0,0 co-ordinates?
Why can't I trim a FeatureLine with a circle. I just tried and AeccTrimFeatures won't accept a circle as a cutting edge.
View 3 Replies View RelatedI am having some trouble trimming a line using a circle as my cutting edge,the line falls short of the circle,I have tried changing EDGEMODE and still the problem persists!
View 9 Replies View RelatedWhen I use the circle tool it trims the hub away from the spokes. How do I do the opposite, trim the spokes away from the hub? (Novice, CS3, XP)
View 2 Replies View Related[URL]
I made a circle over a image. I want to erase-trim the image outside the circle.
CorelDraw X5 v. 15.2.0.686 Hot Fix 4 - Windows 7-64
The yellowcurve is created by progect geometry of red circle on a solid(I delete solid after that).and there are some lines on circle and parallel to projection vector. now I,m going to trim or extend these lines by yellow curve. trim and extend don,t work and there is no intersection point between blue lines and yellow cure . What should I do?
View 4 Replies View RelatedI'm a Autocad 3D newbie! How to trim a solid from a sphere. well here's an image that will explain better!( it's the pink part from the green) .
View 8 Replies View RelatedWhen I initiate the trim command with a double enter (i.e. select all mode), I usually first zoom into the area I want to trim so I see no other objects, then start the trim <Enter><Enter> option, then pick the lines I want to trim. Even if these extend off the screen and cross other objects (not seen on the screen), they usually trim off completely. However, on occassion they don't. To replicate the problem try this:
Draw 2 vertical lines and 2 horizontal intersecting (like noughts and crosses)Draw a horizontal line that intersects both vertical lines but up near the top of those linesZoom in so you only see the square and extending lines (but not the short horizontal line)Trim <Enter> <Enter> and pick from bottom right to top left (i.e. around the squareZoom out.
The square is trimmed, however there are 2 line fragments left above the horizontal short line.
Fix: UndoTrim the same way and presto, it now works I found if I then moved the line above (so only a small amount), zoomed in again, tried to trim - same error.
I m working in autoCAD'13. I have got this drawing from a client. I need to trim these surfaces to get only the outer surfaces. But since these are not intersecting at right angles, i m not able to trim these surfaces.
Please find attached a small part of the concerned drawing. The intersecting surfaces in the drawing have to be trimmed.
Noticed a change in the trim command between 2013 & 2014?
In 2013 (with out selecting trim all) the trim line didn't have to intersect the line you wanted to trim. We just upgraded to 2014 and I noticed that if I want to trim a line that the lines have to intersect. A line that doesn't intersect with the selected trim line will not trim.
I am having trouble with my lines connecting...have tried adjusting the line effects, edge mode, jitter, line extension...but Trim and Facet are not working with certain lines not connecting or not trimming. I attached my dwg file.
View 2 Replies View RelatedI am trying to do a polar array of a small circle within a large circle. I chose the center point of the large circle as the center point of the array, but for some reason the smaller circles are not in perfect array as some one them slightly overlap the larger circle. Is there some way to calibrate it correctly?
View 1 Replies View RelatedI'm having a dimensioning problem, and it doesn't seem to matter if it something I have created or something a customer has sent to me.
When I attempt to dimension a circle, I get the following error message:
Select arc or circle: Object selected is not an arc, circle or polyline arc segment.
A few days back, I got this error message, and when I came in the next morning, I was able to dimension the circle.
Windows 7 SP 1
64 Bit.
Inventor 2013
ACAD Mechanical 2013
Is it possible to trim a 3d solid using another 3d solid as a cutting edge? I want to cut the edges of a dam using the natural ground surface (which is also a solid) as my cutting edge.
View 3 Replies View RelatedI'm facing a very weird problem with circle and interception osnaps. Maybe I'm wrong, but I've a space between the osnaps interception and the the circle line (pointer) when I'm trying to move it to the bottom or top line.
The problem doesn't occur with line. The osnap will go directly to the interception, but with the circle, I just can't understand... It's currently messing my drawing up, as I'm trying to move the circle tan point to another interception.
Here is the screenshots with only interception snap checked (working in milimeters if it does matter):
Well, seems it does occurs with all the snaps too, tested it with "nearest" too, and look how descaled it is:
Why the lines sometimes get angular when I draw a circle/curve? How can I make them round?
View 8 Replies View RelatedCan a AutoLISP command be written to read an attribute in a block and draw a circle with the attribute as the diameter using variables?
View 1 Replies View RelatedI am making a CD cover and i made some print screens of an app and paste them into autocad, and then i design text, lines,... all in autocad. Now i need to print to .jpg and you need to select window for saving image, but window is rectangular, so a need to open image in paint and delete everything outside the circle (border of cd).
View 3 Replies View RelatedTo the expert here, I have tank foundation with multi circle column under it. How to create or find in afast way the coordinate of each center of column? Any special command for this?
View 9 Replies View Relatedhow to get the little green rotate circle back in C3D 2012 and 2013?
When you click on a point in 2011 (at least my setup), there is a little green circle that pops up that I can click on and rotate the point around. In 2012, I have to click on the point, then right click on it, then select rotate label, only then can I rotate the thing.
C3D - 2014, Sincpac Addon
I'm trying to create a dynamic block that uses a parameter and an attribute definition to determine the diameter of a circle in that block. I plan to export GIS points with diameter in the attribute table into a CAD file with the block definition. I'm having trouble figuring out how to set up the parameters to read to attribute definition and adjust the circle diameter. Using AutoCAD 2013
View 5 Replies View RelatedI need to find the center of a circle that is tangent to another circle and a point on a line. I cannot use tangent tangent radius.
View 4 Replies View RelatedI was wondering the best way to draw a circle that passes through an endpoint of a line and then is tangent to another circle above it? I need to create a radius of 3.5 between the two points.
View 9 Replies View RelatedI am trying to oTrack distance from the top circle edge of a cylinder to a certain distance ... whenever i try to do that ... it either track to x and y .. but not in z :/ ... the video i have on you tube he did it so simply and it seems to be easy .
I am not sure what is wrong .. but i heard parallel and perspective view could make a difference .. i actually try both :/ ...
[URL].....
I have made this planet and I want its ring to look as it's spinning around it, So the upper of the ring should go behind the actual planet! How can I do that? Also how can I add some volume to the ring to make it look a bit more realistic?
View 5 Replies View RelatedHow to trim the object using VB coding
View 3 Replies View Relatedis there a way to trim an alignment?
View 3 Replies View RelatedHere I enclose file Cam_Profile.ipt, this is a spline curve made from an Excel matrix with 670 points in 3 decimals accuracy (VBA editor)
Extruding is not possible because of self intersecting path.
I want to trim both two free ends from the intersection and also close the intersection for extruding this profile. However ....., without displacement of any current point in the perimeter of the closed spline!
Whenever I try to trim two intersection arcs who have the same bending direction and similar radius, casue it is extremely hard to click on the parts that need to be trimmed off. See attached pic for reference.
View 2 Replies View RelatedI am using script to create my drawings. I am facing one problem in trim option. I'll explain the scenario..
i created one profile in one layer and then i freezed it. then i created another layer and creating another sketch and performing trim option, while that time it trims based on the sketch in the freezed layer. I dont know how to solve it... I have attached the script of it..