Photoshop :: Trim Line That Intersects Circle Like Spokes Away From A Hub?
Apr 29, 2012When I use the circle tool it trims the hub away from the spokes. How do I do the opposite, trim the spokes away from the hub? (Novice, CS3, XP)
View 2 Replies
ADVERTISEMENT
AutoCad 2D :: Trim Line Using A Circle As Cutting Edge
Mar 21, 2013I am having some trouble trimming a line using a circle as my cutting edge,the line falls short of the circle,I have tried changing EDGEMODE and still the problem persists!
View 9 Replies View RelatedAutoCAD 2013 :: Can't Trim Circle TTR
Apr 13, 2013I drew 2 circles with ttr command (1 and 2). The problem is when I try to trim them to remove the part I don't need, it doesn't work cause the circles 1 and 2 aren't stick with the borders as they should. At the 4 red circle points, if you zoom you'll notice they don't stick the border, never faced this problem before (usually I cut the part I don't need without problem). I've done regen/all but doesn't seem to fix that problem.
View 9 Replies View RelatedAutoCAD Civil 3D :: Trim FeatureLine With Circle?
Mar 20, 2012Why can't I trim a FeatureLine with a circle. I just tried and AeccTrimFeatures won't accept a circle as a cutting edge.
View 3 Replies View RelatedAutoCAD 2013 :: How To Trim Circle Segment Between 2 Red Lines
Oct 13, 2012I posted a file drawing of a basic symbol.....how do i trim the circle segment between the 2 red lines?
I have drawn this symbol in space....should i be anchoring it to the 0,0 co-ordinates?
CorelDRAW Graphics Suite X5 :: Vector Circle On Image Trim?
Oct 26, 2011[URL]
I made a circle over a image. I want to erase-trim the image outside the circle.
CorelDraw X5 v. 15.2.0.686 Hot Fix 4 - Windows 7-64
AutoCad :: Find Center Of Circle Tangent To Another Circle And Point On A Line
Dec 18, 2011I need to find the center of a circle that is tangent to another circle and a point on a line. I cannot use tangent tangent radius.
View 4 Replies View RelatedPaint.NET :: How To Make Spokes In A Wheel
May 8, 2012I had a paint program that would let draw a line, copy the line, and when pasting I could tell how many copies and at what angle. Is there some way to do this in Paint.net? More precisely I am needing wheel with 365 spokes.
View 6 Replies View RelatedAutoCad :: Extend A Line To A Block Or Trim?
Mar 12, 2013How do I extend a line to a block or trim? seems like every time i trim or extend the line to a block the line won't recognized/notice the block. what can i do?
View 1 Replies View RelatedAutoCad :: Can Trim LINE To LOFTED Surface
Jun 30, 2012Can you create a wireframe mesh consisting of lines or splines out of lofted surface?
View 3 Replies View RelatedAutoCad 3D :: Trim One Side Of Circular Surface By Using Projected Line
Nov 21, 2011I am trying to trim one side of a circular surface by using a projected line that forms my trimming line. The original surface is simply a circle that is swept along a path (like a tube/cylinder). When trimming by using the projected line it wants to cut all the way through the surface (i.e. both sides of the tube/cylinder) but I only want it to cut out one side. Is there a way of allowing this or do I create two semi-circular surfaces, therefore only cutting/trimming in effect one side?
View 2 Replies View RelatedPhotoshop :: Turn A Line Into A Circle
Oct 8, 2002how to turn any length of a line in photoshop (7) into a perfect circle.
I have a line 8 by 50 pixels perfectly flat, how to curve that into a border of a circle?
Illustrator :: Adding Stroke That Acts As Clipping Mask Whenever Path Intersects Itself?
Oct 26, 2013Any way to do this using strokes, but everything I've tried so far has been unsuccessful. I'm starting to realize that this may actually be impossible, but maybe there's a trick I'm unaware of. Pic should explain what I'm trying to do.
View 3 Replies View RelatedAutoCAD Visual LISP / AutoLISP :: Line Trim - Draw Lots Of Plumbing Plans
Jan 9, 2013This is to trim a line that crosses another. I draw lots of plumbing plans. It draws a circle based on 'dimscale', trims a line to that circle, then erases the circle. The problem is if you miss the trim point (PT2) it does not erase the circle and you lose your object snaps.
;Pipeline Break
(Defun C:bb (/ s1 ds1 r1 PT1 PT2 AX)
(setq s1 (getvar "osmode"))
(setq ds1 (getvar "dimscale"))
(setvar "osmode" 63)
(setq r1 (* ds1 0.03125))
(setq PT1 (getpoint "
[code]....
Photoshop :: Rounded Line, Not Complete Circle
Mar 29, 2005I'm wondering how to trace the "tail" of my bear using the Pen Tool in Photostop. I've already traced all around the bear to create the general shape. Now I need to create the lines within the bear to give the shape life.
I've been using Photoshop for years, but have never needed a curved line of some sort until now... so now I ask: How is this done?
Photoshop :: Change Colour Of Outer Line Of A Circle?
Sep 20, 2013I drew up a circle with no fill inside, to show where the location of my highway storm culvert will be.
I changed the thickness of the outer line of my circle shape by creating a stroke effect at layer → blending options → stroke; then I changed the thickness of the line by right clicking in stroke at the layers panel and then choosing "scale effect."
But the problem I have is that the outer line is gray, and I want it to be black.
The outer line was originally red though so I changed my image → mode to grayscale, because I couldn't find a way to change the colour while keeping my image in RGB colour. So I've managed to make the outer line gray by changing the image mode but I still can't change the colour of the outer line to black.
I'm sure there must be other ways of changing the outer line colour without having to change the image mode.
The text next to the circle says «Obra de desagüe». That's spanish for "drainage construction site."
You see, I can't change the colour because I have no clue at where the "change colour option" is. I tried going to layer → layer properties, but in there there's only 7 colours to choose from. I chose a random colour, just to see what happens and what truly changed colour was the layer, within the layers panel; not the shape contained within the layer.
AutoCad :: Get The Line To Connect With Circle?
May 24, 2012I have a little problem with trim in autocad 2012. After trimming some lines that cut through a circle there's a big gap between the circle and line, so there's no way i can create a polyline. How do I fix it?
here is the figure w/o trimming
pic1.png
Here it is after trimming
pic2.png
And as you can see there is space between the lines. How can I get the line to connect to the circle?
pic 3.png
AutoCad :: How To Scale Every Line / Circle
Aug 21, 2013I am trying to draw the part as shown in attachment. I started off with the base rectangle whose dimensions are 120 * 42. After zooming out completely, it's still too big and takes the entire screen space. If I draw the rectangle and scale it, say by .5, would I have to scale every other line/circle that I draw from there on individually? Or is there a more efficient way to do this?
View 4 Replies View RelatedPaint Shop Pro :: Text On Circle Line
May 25, 2011I know how to get the text on the cirle line but when I type in the text, it will only read from left to right. I want to put my text at the bottom of the circle and have in go left to right with the text right side up. But every time I try and put the text at the bottom of the circle the text is upside down and right to left.
View 3 Replies View RelatedAutoCad :: Circle Touching A Line And A Point
Apr 15, 2012I would like to know how to make something like what I attach below.Its a circle with radius 112, touching a point on the corner, and the circle must touch some point on the line above precisely.
View 5 Replies View RelatedAutoCad :: How To Make Circle Perpendicular To Line
Feb 8, 2011I am trying to make a circle perpendicular (at its midpoint) to the end of a cylindrical helix in 3D space. I tried using the perpendicular geometric constraint but it won't let me (says "invalid selection"...). Is there a way to make the ucs (z axis) tangential to the end of the helix?
View 4 Replies View RelatedAutoCad :: Force Dimension Of A Line / Circle
Sep 29, 2011If there is a way to force the dimension of a line or circle or anything.
For example: If I draw a line and dimension it, it will dimension it to 2.973 let's say, but if I want to change the dimension or the line to 3.300, how would I do that?
Also, after you create a 2D drawing, is there a way to make it a 3D model or extrude the model?
AutoCad 2D :: Draw Circle So That Line Becomes Tangent To It?
Feb 20, 2013I’ve an already drawn inclined line from a fixed point (saypoint (0,2) on Y-axis). The inclination is also fixed (say 150 tothe horizontal). My objective is to draw a circle with one quadrant at a fixedpoint (say point (1,0) on X-axis), so that, the line becomes a perfect tangentto the circle. The diameter of the circle may vary to make the line perfecttangent to the circle.
View 9 Replies View RelatedIllustrator :: How To Run A Line Of Vector Chevrons Around A Circle
Feb 18, 2014Is it posiibe to run a line of vector chevrons aound a circle in Illustrator CS5?
View 3 Replies View RelatedIllustrator :: Logo - Join A Line And Circle
Aug 15, 2012I'm trying to recreate a logo and I want to join a line and circle, so that the outer circle is merged with the top line, as in the figure below. All the pathfinder tools don't give me what I'm after, I know there's got to be a simple way to do this, how can I accomplish this?
View 5 Replies View RelatedCorelDRAW X3 :: How Do Divide Line Or Circle Into Equal Segments
Jun 11, 2009I'm sure I've done this before, but I can remember how to divide a circle and a line into equal segments using CorelDraw X3.
View 6 Replies View RelatedAutoCAD Inventor :: Constructing Line Segments Across Circle?
Nov 25, 2011Trying to get evenly spaced line segments that lie on the circumference of a circle - every time I do the pattern repetition it gives me line segments the same length instead of constraining them to the circumference of the circle ?
View 1 Replies View RelatedAutoCAD Inventor :: Intercept Dimension Between A Line And A Circle
Oct 30, 2012I am trying to make a intercept point with dimension between a line and a circle and i can't figure out how to do it.
View 2 Replies View RelatedAutoCad 2D :: Keep Cable Line Of Crane Always Tangent To Circle?
Jul 18, 2012I am attempting to keep the cable line of the crane always tangent to the circle at the top of the crane. The length of the crane (including the circle at the top) is being polar stretched but i am unable to keep the cable tangent to the top circle as i stretch and rotate the crane.
View 6 Replies View RelatedAutoCad 2D :: Drawing Tangent Line To Point On Circle
Mar 23, 2008I am a new user of Autocad LT and looking for drawing a tangent line to a point on a circle.
View 7 Replies View RelatedAutoCad :: Placing Circle Relative To Diagonal Line
Oct 11, 2012[URL] ......
I'm trying to place the blue circle at the bottom of the drawing so its radius is 15mm from the mid point of the diagonal line on the right. I've been experimenting with snap points and the from command, but I can't seem to get it just right. I suspect I mess up with the coordinates from the offset point since it's on a diagonal line.