I'm trying to recreate a logo and I want to join a line and circle, so that the outer circle is merged with the top line, as in the figure below. All the pathfinder tools don't give me what I'm after, I know there's got to be a simple way to do this, how can I accomplish this?
View 5 RepliesI have the following shape:
Which is an ellipse which I happened to draw a line inside of. My goal is to be able to join the line with the ellipse so I can make it part of the shape, then I'd like to chop off the top of the ellipse (the part on top of the line).
I am designing a logo in a circle form. I have written the lettering on top of the circle and now would like to write underneath the circle.
View 1 Replies View RelatedThe command to JOIN two overlapping anchor points as a SMOOTH join is not working (at least, on Mac).
"The join option only results in a corner join regardless of whether you select anchor points to join or the entire path. However, for overlapping anchor points, if you want the option to select a smooth or corner join, then use Ctrl+Shift+Alt+J (Windows) or Cmd+Shift+Option+J (Mac OS)."
I made this technical detail. To make an arc I use ''tan, tan, radius'' command. It looks like arc and circle is joined together, but if I move closer as you can see they aren't joined together. So how can I join them? I tried 'join' command but it won't work for me or maybe I don't know how correctly use this commad.
View 8 Replies View RelatedIs it posiibe to run a line of vector chevrons aound a circle in Illustrator CS5?
View 3 Replies View RelatedI'm trying to extrude a circle around a path in all dimensions, so I drew my path in lines, filleted the corners then tried to join using the PEDIT - Join command.
Firstly, the join says something like "2 segments added to 2 polylines" when really all I want is 1 polyline.
Second, when I try to insert my circle for extrusion I OSNAP to the end of the line, then when I specify the radius it draws in the wrong plane. So far the only way I have gotten around it is rotating the ucs. Is there an easy way to do this? my Dynamic UCS is on.
I've got CS6 and Windows 7. Trying to make a line with an arrow on one end curve around a circle. Actually want it to have a 3D look like it was curving around the back side of a globe. How do you do this?
View 12 Replies View RelatedI need to find the center of a circle that is tangent to another circle and a point on a line. I cannot use tangent tangent radius.
View 4 Replies View RelatedI'm new to Illustrator and perhaps it's not the best software of CS6 Master for doing this, but:
I have a few (13) circles, they are connected with lines (one line from the centre of a circle to the centre of the next one, so 13 connecting lines). I need to move the circles around in order to create the appearance that suits me best, but I want the connecting ending to move together (see picture below). I need to do this often and get an immediate visual feedback. How do I do it? Am I using the wrong software altogether?
I'd like to create a logo with some text in the shape of a circle or maybe a horseshoe.
What's would be the best way to do this? I've tried creating a path in the shape of a horseshoe but can't work out how to add my text to it.
I am trying to join line in different plan. but i cant join many line in this option. any other method. thats line used for sweep.
View 1 Replies View RelatedWhat i'm looking for is the equivalent of using "Path along text" (in this case for a circular path) but using already rendered bitmap data instead of text and a font. Why i need to do this is: 1. i don't have a font for the logo text i created (i don't think one exists) and 2. i would like to add some effects before "wrapping" the text around the circle.
I'm having so-so success with "distort -> polar coordinates" .
I am totally new to Inventor. I have a lot of experience in Illustrator and Photoshop; what I want to do is possible in those programs, but I have not figured out how to do it in Inventor.
Essentialy, I want to make a closed path from a spline and a straight line— this will become a custom shape that I want to turn into a solid. Is it possible or should I just use the split feature?
In the end, I am trying to make a solid that is similar to a section of this necklace, minus the curved portion that connected them to the necklace, itself.
I have all of my data in an Oracle database (Gas Enterprise Model). I need to join the pipe (Line) with the meter (point) in order to have the attributes of both for a report.
A query on geometry in Oracle definitely did not work and doing an overlay analysis in Map3D strips the attribute data when I create a buffer. There is nothing to join on for the tables, A Network analysis will not work because the lines are for services and don't have their connected distribution.
I just switched over from 2005 to 2012. In 2005 I used Express Tools to change several lines of text to one mtext object. I can't find it in 2012. I didn't realize how much I used it until I lost it.
how to select several lines of text and convert it to one mtext object?
I have made this planet and I want its ring to look as it's spinning around it, So the upper of the ring should go behind the actual planet! How can I do that? Also how can I add some volume to the ring to make it look a bit more realistic?
View 5 Replies View RelatedDrawing: line, arc, line.
arc was defined with line's end points and radius, so I'm positive that this drawing is continuous.
Steps I take:
pedit
click
do you wish to turn into polyline
y
j
Select objects: 1 found
Select objects: 1 found, 2 total [enter]
Select objects:
0 segments added to polyline
[enter]
I had no problem turning other arcs into polyline...
I'm trying to join two images. Both of them are .svg files, but whenever I press Ctrl-J it gives me a error: The selected objects cannot be joined as they are invalid objects(Compound paths, closed paths, text objects, graphs, Live Paint group) You can use the Join command to connect two or more paths, paths in groups;or to close an open paths.
(By the way, I'm using Illustrator cs6 on a trial version)
I'm trying to join two paths with the pen tool. The shape is a coffe mug, took me half an hour to try to combine paths with the pen tool.
I'm trying to join where the little white gap is. I had the same issue opposite but I managed to draw a little curve in there and join the paths. But I can't seem to do it the other side and I don't understand how it works.
I have a cycling jersey I am designing. Now I would like to do the following, but I do not know how:
From This:
(I coloured the paths in PS - This is how they are separated)
to this:
HERE is my vector file
Im trying to get the join dialogue to open so I can set to smooth but when I click comm j or shift option comm j it doesn't open. I closed and reopened holding shift control option comm but still doesnt show. How do i get it?
CS6
I'm trying to do a poster with a sort of graffiti writings on a wall but I can't reach for any kind of realism. I'd like to see the writing on the wall like it was actually written.I'm using a real photo behind the writings but the image and the text don't connect together, it is simply like a copy-past work. the effect I'd like to reach is like if the writings were printed on the wall but the wall is a photo so I don't know if they can be joined together..
View 5 Replies View Related[Illustrator CS5]
I need to copy and paste path segments in order to create uniform serifs for letters. (For example, specific path curves).
So imagine I have a horizontal segment and a curve segment. I mouseover each one seperately and I can see they have anchor points where I want them to merge afterwards. I drag one towards the other to make them intersect. Then I try to select both anchor points and press CTRL + SHIFT + ALT + J, but it displays this error: "To join, you must select two open endpoints. (...)" Which makes me think I'm not really selecting both anchor points when they're overlapped.
I have the idea that they can't overlap, because my path segment won't detect the anchor point in the other path. They're just visually intersected but not connected.
If I try to join them when they aren't overlapped, they will join but distort the original shape of the path segments. I select them both with the Direct Selection tool, pressing Shift to add the second anchor point to the selection, which won't work when they're overlapped because Shift + Clicking will deselect the anchor that seems on top.
I also tried various shape modes in pathfinder and nothing works.
How can I properly overlap and join / merge them?
(I'm using a white fill so I can see the shape forming as I add more anchor points so I'm sure they aren't joined).
kept getting the following error when I try to join two end points.
To join, you must select two open endpoints. If they are not on the same path, they cannot be on text paths nor inside graphs, and if both of them are grouped, they must be in the same group.
Here's what I have. Both paths are in the same group. I zoom to max and both ends are on top of each other. So, why am I kept getting this error message when trying to join them? I tried to Average and there is no error but yet the path is not closed.
Why illustrator changed to having a join instruction (for path nodes) that makes cusp (non-smooth) joins after the join is performed as opposed to the old method of having another dialogue that allowed you to choose what type of join you wanted prior to making the join?
View 3 Replies View RelatedIn the above image, I have four symmetrical corners of an ellipse which I'm trying to join together into one ellipse that is perfectly symmetrical. I am trying to line up the anchors perfectly (one corner at time) and then do a join, yet the result is always slightly off. I've been selecting the two points I want to join and using Path -> Average, then Path -> Join to do this, yet as mentioned it's not coming out precise.
View 10 Replies View RelatedWhat setting have I changed: Just today, when I try to move a point, "unite" shapes, or join 2 points, the points jump out of position. I've turned off "snap to grid" and "align new objects to pixel grid". I've even copied and pasted the artwork into a new "default" file. I've also restarted AICS5. I'm sure I'm overlooking something obvious.
View 5 Replies View RelatedIllustrator CS6.
I did the fish body outline. Then I decided I needed to change the path by the head. I want to join the inside line to the body outline and eliminate the path on the head portion. I need the finished outline to e a closed path so I can do a clipping mask. I have tried the "join" cmd but it wants to add a straight line between the bottom and top.
Is there a way to accomplish what I am wanting to do?
Working in Illustrator CS5
Hopefully you can see below, I've drawn the shape on the left and closed the path - it's a closed shape. I then drew another shape on the right, with the two corners exactly placed on the other shape's corners, and I'm getting some sort of overlap/miter join of somesort. Best way I can describe it.
Now I know how to join to open path end points, with the JOIN command. That's not what I'm after here. Simply when I draw another closed shape with the corners matching the other shape, I get those rather awkward and ugly corners? Or can you use the JOIN command? Totally lose here.
Any way to stop this from happening? Surely I'm simply missing something blatantly obvious here?
I guess the question would be: how to draw another shape that joins with the original closed path, without using the pathfinder tools. I want two separate shapes so that I can colour them independently, and not have those horrible corners.
how to turn any length of a line in photoshop (7) into a perfect circle.
I have a line 8 by 50 pixels perfectly flat, how to curve that into a border of a circle?