Im trying to get the join dialogue to open so I can set to smooth but when I click comm j or shift option comm j it doesn't open. I closed and reopened holding shift control option comm but still doesnt show. How do i get it?
CS6
Why illustrator changed to having a join instruction (for path nodes) that makes cusp (non-smooth) joins after the join is performed as opposed to the old method of having another dialogue that allowed you to choose what type of join you wanted prior to making the join?
View 3 Replies View RelatedThe command to JOIN two overlapping anchor points as a SMOOTH join is not working (at least, on Mac).
"The join option only results in a corner join regardless of whether you select anchor points to join or the entire path. However, for overlapping anchor points, if you want the option to select a smooth or corner join, then use Ctrl+Shift+Alt+J (Windows) or Cmd+Shift+Option+J (Mac OS)."
Drawing: line, arc, line.
arc was defined with line's end points and radius, so I'm positive that this drawing is continuous.
Steps I take:
pedit
click
do you wish to turn into polyline
y
j
Select objects: 1 found
Select objects: 1 found, 2 total [enter]
Select objects:
0 segments added to polyline
[enter]
I had no problem turning other arcs into polyline...
I'm trying to join two images. Both of them are .svg files, but whenever I press Ctrl-J it gives me a error: The selected objects cannot be joined as they are invalid objects(Compound paths, closed paths, text objects, graphs, Live Paint group) You can use the Join command to connect two or more paths, paths in groups;or to close an open paths.
(By the way, I'm using Illustrator cs6 on a trial version)
I'm trying to join two paths with the pen tool. The shape is a coffe mug, took me half an hour to try to combine paths with the pen tool.
I'm trying to join where the little white gap is. I had the same issue opposite but I managed to draw a little curve in there and join the paths. But I can't seem to do it the other side and I don't understand how it works.
I have a cycling jersey I am designing. Now I would like to do the following, but I do not know how:
From This:
(I coloured the paths in PS - This is how they are separated)
to this:
HERE is my vector file
I'm trying to do a poster with a sort of graffiti writings on a wall but I can't reach for any kind of realism. I'd like to see the writing on the wall like it was actually written.I'm using a real photo behind the writings but the image and the text don't connect together, it is simply like a copy-past work. the effect I'd like to reach is like if the writings were printed on the wall but the wall is a photo so I don't know if they can be joined together..
View 5 Replies View RelatedI have the following shape:
Which is an ellipse which I happened to draw a line inside of. My goal is to be able to join the line with the ellipse so I can make it part of the shape, then I'd like to chop off the top of the ellipse (the part on top of the line).
When I click on the button, the dialogue box does not appear and the program is locked up until I hit escape. Before I do that it "pings" when I click elsewhere.
View 7 Replies View Related[Illustrator CS5]
I need to copy and paste path segments in order to create uniform serifs for letters. (For example, specific path curves).
So imagine I have a horizontal segment and a curve segment. I mouseover each one seperately and I can see they have anchor points where I want them to merge afterwards. I drag one towards the other to make them intersect. Then I try to select both anchor points and press CTRL + SHIFT + ALT + J, but it displays this error: "To join, you must select two open endpoints. (...)" Which makes me think I'm not really selecting both anchor points when they're overlapped.
I have the idea that they can't overlap, because my path segment won't detect the anchor point in the other path. They're just visually intersected but not connected.
If I try to join them when they aren't overlapped, they will join but distort the original shape of the path segments. I select them both with the Direct Selection tool, pressing Shift to add the second anchor point to the selection, which won't work when they're overlapped because Shift + Clicking will deselect the anchor that seems on top.
I also tried various shape modes in pathfinder and nothing works.
How can I properly overlap and join / merge them?
(I'm using a white fill so I can see the shape forming as I add more anchor points so I'm sure they aren't joined).
kept getting the following error when I try to join two end points.
To join, you must select two open endpoints. If they are not on the same path, they cannot be on text paths nor inside graphs, and if both of them are grouped, they must be in the same group.
Here's what I have. Both paths are in the same group. I zoom to max and both ends are on top of each other. So, why am I kept getting this error message when trying to join them? I tried to Average and there is no error but yet the path is not closed.
In the above image, I have four symmetrical corners of an ellipse which I'm trying to join together into one ellipse that is perfectly symmetrical. I am trying to line up the anchors perfectly (one corner at time) and then do a join, yet the result is always slightly off. I've been selecting the two points I want to join and using Path -> Average, then Path -> Join to do this, yet as mentioned it's not coming out precise.
View 10 Replies View RelatedWhat setting have I changed: Just today, when I try to move a point, "unite" shapes, or join 2 points, the points jump out of position. I've turned off "snap to grid" and "align new objects to pixel grid". I've even copied and pasted the artwork into a new "default" file. I've also restarted AICS5. I'm sure I'm overlooking something obvious.
View 5 Replies View RelatedIllustrator CS6.
I did the fish body outline. Then I decided I needed to change the path by the head. I want to join the inside line to the body outline and eliminate the path on the head portion. I need the finished outline to e a closed path so I can do a clipping mask. I have tried the "join" cmd but it wants to add a straight line between the bottom and top.
Is there a way to accomplish what I am wanting to do?
I'm trying to recreate a logo and I want to join a line and circle, so that the outer circle is merged with the top line, as in the figure below. All the pathfinder tools don't give me what I'm after, I know there's got to be a simple way to do this, how can I accomplish this?
View 5 Replies View RelatedWorking in Illustrator CS5
Hopefully you can see below, I've drawn the shape on the left and closed the path - it's a closed shape. I then drew another shape on the right, with the two corners exactly placed on the other shape's corners, and I'm getting some sort of overlap/miter join of somesort. Best way I can describe it.
Now I know how to join to open path end points, with the JOIN command. That's not what I'm after here. Simply when I draw another closed shape with the corners matching the other shape, I get those rather awkward and ugly corners? Or can you use the JOIN command? Totally lose here.
Any way to stop this from happening? Surely I'm simply missing something blatantly obvious here?
I guess the question would be: how to draw another shape that joins with the original closed path, without using the pathfinder tools. I want two separate shapes so that I can colour them independently, and not have those horrible corners.
Object - Path - Join dialog box asking if smooth or corner path is not showing up in CS5. How to get it bac/activate it?
View 5 Replies View RelatedI've got a series of lines that all join perfectly with round corners except 1 of them. See attached. I can't figure out why.
View 2 Replies View RelatedImagine a triangle with its top chopped off and the path open at the top. Is there a quick way of selecting those top 2 points and auto extending them to complete the triangle?If I use Object>Path>Average my 2 points move to join in the middle, they don't extend up along the same trajectory to join.
View 2 Replies View Related.... so as to be able to apply a fill over the whole object??
This might sound more obvious than it actually is in this case so i'll explain. My partners artwork contains a lot of linework and unfortunately, i can't get the degree of accuracy i need with a continous path. Therefore, the problem i have is joining lots of paths (some of which have endpoints joining midway through other paths) to make a single object with the strokes preserved, so i can apply a fill to the overall object or to individual sections.
I've tried unite, join and all the other commands that i'm aware of but all give undesired effects. I've tried using a compund path but all that does is make them act as one but still doesn't do what i need with regards to filling the object.
A simplified example of what i need to achieve is this...... create a square using 4 seperate paths and then a cross through the middle using more seperate paths to create a 4 box square. I need to be able to make this one object so i can fill each individual square a different colour if need be?
I work on a Mac so the shortcuts and menus are for Mac, what it will be on a Windows computer
I was having trouble in Illustrator CS6 joining two points smooth. I read this article ...[URL]... about joining in Illustrator CS5 (which seems to be the same in CS6) ... and noticed it says "A Smooth join is possible only when the end-points are smooth" ... now who came up with this asshat rule (pardon my french)??? I used to be able to force a joining to be smooth no matter what kind of points I had, however, not anymore it seems
This is what I had trouble with:
Smooth joins
Step 1.As you can see in the image below I have two points both with an arm ... they should qualify as smooth end-points, right?
Step 2.So after moving the two paths together I went ahead and selected the two points with my Direct Selection Tool (the white arrow). Notice how only one arm sticks out all of a sudden (this was actually a clue to why I had trouble in the first place but more on this later).
Step 3.I tried to force the two points to join smoothly by using the cmd+opt+shift+J shortcut to get the Average & Join dialog box up and select Smooth ... to no avail.
Step 4.It stil ends up doing this weird joining (this is after I tried to move the point with my Direct Selection Tool).
Step 5.So I used cmd+Z until I was back to square one and then I discovered if I moved one of the end-points there was another one beneath it. Notice that it is the point that was missing an arm in step 2, when I had selected what I thought was only two points, which should have clued me in.
Removing the extra point and placing the two smooth end-points on top of each other again made it possible to make the smooth joining, I had tried to do countless times.
What I wonder about now is the fact that I could get the Average & Join dialog box without having Illustrator complain up a storm about me having selected more than two points? Illustrator used to be very picky about this, which would have made me discover the extra point way sooner.
Shortcuts In the article I also noticed people complaining about the four keys shortcut for the Average & Join dialog box (cmd+opt+shift+J). You can just go ahead and change that in Edit/Keyboard Shortcuts... (cmd+opt+shift+K). Here is how:
Step 1.In the dropdown change Tools to Menu Commands.
Step 2.Go to Other Objects ... there you will find Average & Join. Go ahead and clear the shortcut and press whichever shortcut you wish for. I chose cmd+J, because I wish to use this method more often than Join. After this you get the option to Go To Conflict ... I did that and gave Join the shortcut shift+cmd+J and ended up giving Justify Text Left the shortcut cmd+opt+shift+J ... yeah, I seldom use the shortcut for Justify Text Left anyway.
Step 3.I saved my new custom shortcut set with the name "Adobe Illustrator CS6 Shortcuts" ... that way I can search for the file and take it with me in case I need it on another computer and the name tells me which version it is for.
I am getting an error message while trying to use the Path/Join function in Ai CC6. While working on a new layer I try to Path/Join the vectorized image and the message states that "The selected objects cannot be joined as they are invalid objects." What am I doing wrong?
View 5 Replies View RelatedI'm seriously stuck trying to join 3 open paths with stroke only, into something of an intersection that is dividing 3 pie slots. However I can't join more than 2 of them, as the screenshot below the third one gets left behind, Join command doesn't work Because I have the opacity down to 70% you can see the ugly overlap in the intersection and I need to join all the 3 points for them to look as they should. If/how this can be done in Illustrator?
View 3 Replies View RelatedI am making a sign for my logo. The 'i' in my script face is long and overlaps the following letter which the sign maker's router will not read. So I would like to be able to use the shape builder tool to join the 3 instances where the letter 'i' appears each to the following letter. No luck so far. I have turned the type into points. I have highlighted the first instance, 'i' and 'c'. but the shape builder tool shows a circle with a line through it... not working.
View 3 Replies View RelatedI am a bit of a newbie to illustrator cs6. I have been using the image trace function so that I can edit my hand drawn pictures. I 'Place' the scan of my drawing and then go to Object>Image Trace>Make and Expand. The problem I have is when I want to join two lines together to close the shape (as below).
I have tried simply dragging the anchor points and reshaping the line so it appeared to be closed, I have tried closing it with the pen tool and I have tried to 'path>join' them but this box comes up.
I want to be able to fill my image traces with colour easily, can this be done?
Using CS6 I have a bitmap I traced, which worked great. Now I want to create a mask similar to this horse head decal. Since the white isn't actually a shape I keep getting the error that I have to join the shapes. But it's a collection of black vectors that make up the image. What would be the best way to create an outline, or a fill that I could use to mask with? In photoshop I remember you paint a mask area.Which would be ideal. Is there a simular way to to this wiht CS6?
View 4 Replies View RelatedI have two PC's side-by-side, running the same version of CS6. On one PC, I can see my Libraries from the "save as" and "open" dialogue boxes and on the other I have can't have have to dig down to find the folders I want to save to. I don't have any plug-ins installed, and I have not edited the registry.
View 2 Replies View RelatedWhere is the Adobe Illustrator CC SDK and ExtendScript Toolkit for this latest version?
View 7 Replies View RelatedI can't seem to find the 3D effect in my Illustrator CS6. It used to be there, and I have used it before, but now it has vanished!
View 1 Replies View RelatedI need to create an illustration with only a certain amount of colors. I cleared out everything from my swatches palette and asked it to "add used colors." A color keeps popping up when I do this that I can't find in the actual illustration! But it must be somewhere. Is there a way to search for that color... so I can see where it is? I've tried selecting every piece of artwork, checking it, then locking it... but I'm not finding it.
I'm using CS4 on a Mac.
