I'm trying to join two paths with the pen tool. The shape is a coffe mug, took me half an hour to try to combine paths with the pen tool.
I'm trying to join where the little white gap is. I had the same issue opposite but I managed to draw a little curve in there and join the paths. But I can't seem to do it the other side and I don't understand how it works.
.... so as to be able to apply a fill over the whole object??
This might sound more obvious than it actually is in this case so i'll explain. My partners artwork contains a lot of linework and unfortunately, i can't get the degree of accuracy i need with a continous path. Therefore, the problem i have is joining lots of paths (some of which have endpoints joining midway through other paths) to make a single object with the strokes preserved, so i can apply a fill to the overall object or to individual sections.
I've tried unite, join and all the other commands that i'm aware of but all give undesired effects. I've tried using a compund path but all that does is make them act as one but still doesn't do what i need with regards to filling the object.
A simplified example of what i need to achieve is this...... create a square using 4 seperate paths and then a cross through the middle using more seperate paths to create a 4 box square. I need to be able to make this one object so i can fill each individual square a different colour if need be?
I am making a sign for my logo. The 'i' in my script face is long and overlaps the following letter which the sign maker's router will not read. So I would like to be able to use the shape builder tool to join the 3 instances where the letter 'i' appears each to the following letter. No luck so far. I have turned the type into points. I have highlighted the first instance, 'i' and 'c'. but the shape builder tool shows a circle with a line through it... not working.
View 3 Replies View RelatedThe command to JOIN two overlapping anchor points as a SMOOTH join is not working (at least, on Mac).
"The join option only results in a corner join regardless of whether you select anchor points to join or the entire path. However, for overlapping anchor points, if you want the option to select a smooth or corner join, then use Ctrl+Shift+Alt+J (Windows) or Cmd+Shift+Option+J (Mac OS)."
I am working on a self portrait in illustrator. I have done some of the work using the pencil tool. How do I close the paths with the pen tool.
View 2 Replies View RelatedDoes the scissor tool NOT work on compound paths? I am guessing it does not being it does not work when I use it on them, but the Adobe help section didn't specify.
Also, sometimes when I am using the pen tool, I will place an anchor point but it shifts away from where I want to place it. For example, I will put it at x = 72 & y = 1000 and it will place it at x = 95 & y = 1050.
I thought maybe it was from something I accidentally selected like snap to grid or point, but changing the settings does not correct the issue. I have to close out of the program and restart to fix it.
I try to drag something - either a whole shape, a point or when I'm using a tool like the pencil or the knife and need to have a continuous path, Illustrator is glitching on me. It keep breaking my path and jumping a little even though I never let go of the mouse. Or when I'm trying to copy and paste something by dragging, it will suddenly unselect it, paste it where it was and then copy another shape. Crazy thing is, my mouse works fine on everything else non-Illustrator. It's happening in two different versions on two different computers, one of which has CS6 and is a brand new iMac.
I'm using the following:
5 year old iMac running OS X
Illustrator CS 3
The other computer is at work:
brand new iMac, can't remember the OS
Illustrator CS 6
I'm using the Pencil Tool to draw shapes (not good enough for the Pen Tool yet) and some of my paths are not as smooth as I'd like, so I go over them with the Smooth Tool, though it seems like it either smooths the path a little bit or completely changes its shape.
View 1 Replies View RelatedIn Illustrator I want to maintain the stroke settings while creating several paths with the pen tool. However, every time I start a new path, the stroke settings revert to what must be a default. E.g. I set 16pt + Variable width profile + Basic and stroke a path. When I start a new path, the settings revert to 1pt + Uniform + Basic, and I have to reset back to my original. Other art programs I've used maintain the tool settings most recently used until they are manually changed. How can I get the settings to stay through multiple uses of the pen tool?
View 4 Replies View RelatedI want to join two paths to create a shape that I can fill but at the same time retain one of the original paths (the red one in the image below). I can copy the path I want to retain but surely there is a more elegant solution. See below for for an illustration:
View 6 Replies View RelatedCannot lock other paths/unlock all paths in symbols?
View 8 Replies View RelatedDrawing: line, arc, line.
arc was defined with line's end points and radius, so I'm positive that this drawing is continuous.
Steps I take:
pedit
click
do you wish to turn into polyline
y
j
Select objects: 1 found
Select objects: 1 found, 2 total [enter]
Select objects:
0 segments added to polyline
[enter]
I had no problem turning other arcs into polyline...
I'm trying to join two images. Both of them are .svg files, but whenever I press Ctrl-J it gives me a error: The selected objects cannot be joined as they are invalid objects(Compound paths, closed paths, text objects, graphs, Live Paint group) You can use the Join command to connect two or more paths, paths in groups;or to close an open paths.
(By the way, I'm using Illustrator cs6 on a trial version)
When working with the pen tool and paths is ps7...Did you notice if you make a curve and fill it with a color the bended parts are so jagged? even though the anti aliasing is on...
View 5 Replies View Relatedhow to use paths (along with the pen tool)?
View 8 Replies View RelatedI have a cycling jersey I am designing. Now I would like to do the following, but I do not know how:
From This:
(I coloured the paths in PS - This is how they are separated)
to this:
HERE is my vector file
Im trying to get the join dialogue to open so I can set to smooth but when I click comm j or shift option comm j it doesn't open. I closed and reopened holding shift control option comm but still doesnt show. How do i get it?
CS6
I'm trying to do a poster with a sort of graffiti writings on a wall but I can't reach for any kind of realism. I'd like to see the writing on the wall like it was actually written.I'm using a real photo behind the writings but the image and the text don't connect together, it is simply like a copy-past work. the effect I'd like to reach is like if the writings were printed on the wall but the wall is a photo so I don't know if they can be joined together..
View 5 Replies View RelatedI have the following shape:
Which is an ellipse which I happened to draw a line inside of. My goal is to be able to join the line with the ellipse so I can make it part of the shape, then I'd like to chop off the top of the ellipse (the part on top of the line).
I have ps7 and I'm trying to draw a quick 3d box with the pen tool. (I've just spent 3 days (!) reading about the pen tool and paths in the Photoshop 6 Bible (older but still relevant), and I thought I had a clear understanding but no. Code:
View 7 Replies View RelatedI've been trying to learn how to use the paths tool to edit thing's out and what not - whenever i try to make the last connection though it just turns into a curve automation thing and seems to mess thing's up?
I've attached images of how the first and the last line look.
[Illustrator CS5]
I need to copy and paste path segments in order to create uniform serifs for letters. (For example, specific path curves).
So imagine I have a horizontal segment and a curve segment. I mouseover each one seperately and I can see they have anchor points where I want them to merge afterwards. I drag one towards the other to make them intersect. Then I try to select both anchor points and press CTRL + SHIFT + ALT + J, but it displays this error: "To join, you must select two open endpoints. (...)" Which makes me think I'm not really selecting both anchor points when they're overlapped.
I have the idea that they can't overlap, because my path segment won't detect the anchor point in the other path. They're just visually intersected but not connected.
If I try to join them when they aren't overlapped, they will join but distort the original shape of the path segments. I select them both with the Direct Selection tool, pressing Shift to add the second anchor point to the selection, which won't work when they're overlapped because Shift + Clicking will deselect the anchor that seems on top.
I also tried various shape modes in pathfinder and nothing works.
How can I properly overlap and join / merge them?
(I'm using a white fill so I can see the shape forming as I add more anchor points so I'm sure they aren't joined).
kept getting the following error when I try to join two end points.
To join, you must select two open endpoints. If they are not on the same path, they cannot be on text paths nor inside graphs, and if both of them are grouped, they must be in the same group.
Here's what I have. Both paths are in the same group. I zoom to max and both ends are on top of each other. So, why am I kept getting this error message when trying to join them? I tried to Average and there is no error but yet the path is not closed.
Why illustrator changed to having a join instruction (for path nodes) that makes cusp (non-smooth) joins after the join is performed as opposed to the old method of having another dialogue that allowed you to choose what type of join you wanted prior to making the join?
View 3 Replies View RelatedIn the above image, I have four symmetrical corners of an ellipse which I'm trying to join together into one ellipse that is perfectly symmetrical. I am trying to line up the anchors perfectly (one corner at time) and then do a join, yet the result is always slightly off. I've been selecting the two points I want to join and using Path -> Average, then Path -> Join to do this, yet as mentioned it's not coming out precise.
View 10 Replies View RelatedWhat setting have I changed: Just today, when I try to move a point, "unite" shapes, or join 2 points, the points jump out of position. I've turned off "snap to grid" and "align new objects to pixel grid". I've even copied and pasted the artwork into a new "default" file. I've also restarted AICS5. I'm sure I'm overlooking something obvious.
View 5 Replies View RelatedIllustrator CS6.
I did the fish body outline. Then I decided I needed to change the path by the head. I want to join the inside line to the body outline and eliminate the path on the head portion. I need the finished outline to e a closed path so I can do a clipping mask. I have tried the "join" cmd but it wants to add a straight line between the bottom and top.
Is there a way to accomplish what I am wanting to do?
I'm trying to recreate a logo and I want to join a line and circle, so that the outer circle is merged with the top line, as in the figure below. All the pathfinder tools don't give me what I'm after, I know there's got to be a simple way to do this, how can I accomplish this?
View 5 Replies View RelatedWorking in Illustrator CS5
Hopefully you can see below, I've drawn the shape on the left and closed the path - it's a closed shape. I then drew another shape on the right, with the two corners exactly placed on the other shape's corners, and I'm getting some sort of overlap/miter join of somesort. Best way I can describe it.
Now I know how to join to open path end points, with the JOIN command. That's not what I'm after here. Simply when I draw another closed shape with the corners matching the other shape, I get those rather awkward and ugly corners? Or can you use the JOIN command? Totally lose here.
Any way to stop this from happening? Surely I'm simply missing something blatantly obvious here?
I guess the question would be: how to draw another shape that joins with the original closed path, without using the pathfinder tools. I want two separate shapes so that I can colour them independently, and not have those horrible corners.
Yet another issue I've found with Photoshop CC:When using the crop tool, it moves paths after confirming the crop. (crop from the left, paths are moved to the right). I'm on OSX 10.7, PS 14.0 x64
View 2 Replies View RelatedI'm a keen amateur on the computer and run my own construction company. We currently have a steel ruler as our logo, but I'm trying to get a spiral staircase also. Not sure if two logo's is allowed; the steel ruler has our company name imprinted on it and I thought it was cool way to display our name. Probably severley faultered from a pro.
Was hoping to find some vector art of a helical staircase but not much out there. So we made a couple of beautiful helical stairs for a client, and I'm trying to trace that and use it as our logo also.
I'm tracing it in vector art because we have a Roland GX24 vinyl cutter and I'm making my own banners etc.
I have three queries:
1: The pen is showing up some strange invisible paths which only appear in the plugin cutstudio (where I haven't closed the paths off I presume?). How can I get the paths to be as drawn?;
2: When I go to cut this, the vinyl cutter will treat the paths as single slices. This design will be as if drawn, so I will want a way of creating two paths to the strokes, probably 2mm width apart. That will then leave a piece of vinyl 2mm in width so when I peel off, the vinyl will stay there; like a pen stroke of a handwritten drawing.
3: What snapping should I be using? I've always had problems with points or paths not being snapped together perfectly. The cutter will end up cutting some of the other adjoining 2mm vinyl and after time this will cause the vinyl to peel off.