I want to join two paths to create a shape that I can fill but at the same time retain one of the original paths (the red one in the image below). I can copy the path I want to retain but surely there is a more elegant solution. See below for for an illustration:
View 6 Replies
I wanted to join 2 lines together (i.e. end up with a single line). I know that you can join lines by selecting both then using any of the shape / line / brush tools to drag one node from line A over to the a node on line B (you get a little + symbol next to the mouse cursor once the lines can join).
This is fine is you want the final line shape to differ from the original 2, but what if you want to join 2 lines and retain the original paths?
I can do it by postioning the target nodes on eash of the lines almost but not quite touching then using the above technique but its a bit awkward and I suspect this isn't the best way to go about it.
What does it mean when Illustrator v.15.1.0 ceases to contract a shape using offset paths and will only expand a shape? Seems like only yesterday I could render both ways. Wait a minute, it was only yesterday! Why would it suddenly stop funtioning?
View 3 Replies View RelatedCannot lock other paths/unlock all paths in symbols?
View 8 Replies View RelatedI'm trying to take a shape from illustrator and have the iOS graphics engine draw it without having to import the file. In order to do this, I need to somehow get a text break down of all the bezier paths / curves / points that comprise the shape so I can tell the iOS graphics engine the points that need to be drawn. Is there anyway to get a list of these points from illustrator?
View 1 Replies View Relatedi had imported a few hundred Illustrator paths to After Effects, then used "Create shapes from vector layer" to make them editable Shape layer paths to then run scripts that equalize the number of vertices on each path.
After this i thought via online tutorial that Edit > Edit Original.. would replace or update the originating paths to same number of vertices back in Illustrator, but this was proven wrong.
1) how import AE Shape paths and their Fills to Illustrator?
When I have made a logo and there's mutiple parts and I want to center it, it messes all the parts up. How do I center it while keeping the shape without combining it all? Example in photo: [URL]
View 12 Replies View RelatedAfter using the path tool to create offset path and increasing the size of a letter. when creating an outline of that new letter the outline remains the same as the original. How do I create outlines to the shape of the new path not the original??
View 3 Replies View RelatedI used to use the pen tool for quick shape paths - like a circle, but can't find anyway to do it in CS6.
View 2 Replies View RelatedIs there any "view" that enables you to see the path/shape lines (not the fill, just the lines) that you have done in different layers?
I hate to keep switching opacity on and off to see where the other lines end and stuff.. I know you can turn of and on the paths with CTRL ALT H, but that is only for one layer.. and I want to see them for all the layers while Im working on one.
I have some negative space I created(black area, see first image) that I want to fill with type, not just a simple fill.
Basically I want to create the negative space from a bunch of small minus signs(-) that need to line up as they go across. If I type on each path one at a time as the text doesn't line up that way. This needs to be one continuous path. (see second image)
Unfortunately if I add them together, it creates a compound path, which you cannot type on, unless I am mistaken? So I need them to be a path, not a compound object.
Here's an extremely simple example.. It works with a circle or a square, obviously because it has the same height and width. The problem is when you have irregular shapes, (or in this case, an oval). I know I've seen solutions to this in the past, but I just can't think of how to word this question and find them again.
I know you can create multiple strokes for an object in the appearance palette, but I'm looking for something more effective than just having colored stroke > white stroke > colored stroke> white stroke > etc.
Here's a couple examples of the kind of effect I'm looking for.
I have a few different problems with the pen tool.
1. When using the pen tool I keep finding that the shape I'm doing is slightly overlapping where I've already gone with the pen tool.If I try and go over that area again the path I've just drawn then jumps and ruins the shape I was creating.
How can I stop this from happening?
2. Also is there a limit to the amount of paths you can create and add text to? I created two paths and typed on them fine but when I added a third path it refused to type. The cursor didn't change to show I could type and if I did click on the path line and try to type jumped to my other path and typed there. All paths were on different layers and none were overlapping, but it is 3 circles inside each other that get smaller if this makes a difference.
How can I type on the third path?
3. When I have done a path and clicked stroke it is only a thin line. How can I make this line thicker?
i often see ways of making particles follow splines. But is it possible to create spline paths generated with pflow ? using 3ds max 2013
View 3 Replies View RelatedI'd like a folder that automatically collects any image i have in my library in which i've drawn a vector clipping path in Photoshop.
View 3 Replies View RelatedI am drawing a simple diamond shape made with one rectanlge shape and multiple line segments. As I drew the design, I made sure to connect all the segments at the anchors. When I select all of the segments and try to join the paths, the end points or corners are not smooth. In other words, some of the line segment ends hang over the edges...
The image below shows the left side of the diamond, where the top portion meets the bottom...
I created some paths in illustrator, and I want to paste them in photoshop. I tried cut n' paste, but it doesn't work. I tried exporting to PSD, still doesn't work.
View 3 Replies View RelatedIs there a way to see how many Paths are in a given file?
View 2 Replies View RelatedI trace a lot of line drawings in my work to add regions of color or to create a layered watercolor effect.
In previous versions on Illustrator (I currently use CS6 but I think CS5 worked the way I liked) I could set the opacity to whatever I wanted and new pencil or pen objects would be trasparent as I drew them. Now my paths are opaque no matter what my setting in the transparency menu and it's impossible to see what I'm tracing.
I used to be very productive drawing blobs of color and overlaying quickly for a nice watercolor effect, but now I have to draw a blob, select it and set it's opacity, then draw my next blob and do the same thing. Very time consuming and not good for quick evaluation of whether or not my image is looking good.
I used Illustrator CS5 to just siply choose a font and wrote the words Media King. Then i saved as AI v8 file so that c4d would take the file. The word do have a rounded square as a BG (background).
When it gets in c4d the rounded circle is there but not the font. Does illutrator give paths to text generated in ai?
For some reason all my paths, including old files have become jagged. New paths are coming up jagged as wells as print out and PDF files. Using CS5.
I am not an expert but have been using AI for years to make patterns with the pen tool. The smaller I make the illustration the worst it gets.It is not the pixel preview, tried that already.
Do I have to save, select etc.... my Photoshop 7 file in a certain format in order to export paths to Illustrator? When I open up the exported file in Illustrator, it's blank.
View 2 Replies View RelatedI was wondering if there was a way to 'unmerge' a group of connected paths. The thing is whenever I click on one of the ovals, it selects a whole group of ovals instead of just the one I selected. The problem is that I drew an oval, copied it multiple times until I made a pile out of it, then copied that pile and made other piles. So whenever I click on one of the ovals, it selects the entire pile. Is there a way I can 'unmerge' or ungroup all the paths so I can select just one of the ovals? I'm not doing this so I can copy them again, I'm trying to delete them individually but I really can't.
View 22 Replies View RelatedI've a problem while using the pen tool.. when I draw a new path or more when I'm adjusting the angle of the drawn path, all the other paths aren't shown meanwhile. I don't like that because it keeps me from adjusting the lines accurate to each other. How can I keep them shown?
To illustrate what I mean: [URL]
I'm trying to join two paths with the pen tool. The shape is a coffe mug, took me half an hour to try to combine paths with the pen tool.
I'm trying to join where the little white gap is. I had the same issue opposite but I managed to draw a little curve in there and join the paths. But I can't seem to do it the other side and I don't understand how it works.
I have selected paths on the artboard and would like to be able to move them into one layer.
As there are a large number is there anyway of moving them to a new layer without selecting them (blue highlighting) and moving them?
They are selected on the artboard so the colour square appears next to them in the layers panel but I can't move them to a new layer without selecting them (even using ctrl or shift is still quite time consuming).
I'm in the process of creating an SVG file. I'll have a large number of paths of which all have a seemingly random ID's assigned to them, for example path4758 (see below). Ideally, I'd love to be able to set my own ID for a path, it would work when I parse my SVG file with a Python script. Is it possible to change the ID that is assigned to a path inside of Illustrator? If so, how would I be able to do so?
Sample Path
<path id="path4758" fill="#6DBE45" stroke="#727271" d="M76.872,481.133C76.012,484.881,74.835,481.123,76.872,481.133z"/>
SVG Save Options
SVG Profile 1.1
I have a .pdf output from a program I use at work. The .pdf can be opened in illustrator (IL) and I have about a bezillion of objects which are mostly all paths (0.5 stroke and no fill of course).
Due to the large number of objects, IL crashes after a while.
Is there a way to transform/join the paths from one row into one object? I tried rasterize, but the problem is that I can't change the color of the according row afterwards - and I need to be able to change the color later.
Stuff I tried that didn't work"
- Object>Paths>clean up
- Object>Paths>simplify
I am having a file which has lot of texts. Actually the texts are in outline format as fills,strokes,etc. Is it possible to convert them to an editable text using any option.
View 3 Replies View RelatedI am a newbie in illustrator. I want to use pathfinder to unite two paths. One path has the effect of bulge. When I unite these, both of the paths get the effect bulge. Why is this happening and how can i avoid this?
View 3 Replies View RelatedI am new in Illustrator, I don't need those white lines in the middle, so I would like to know how I can fill that shape fully with black color?
View 2 Replies View Related
