After using the path tool to create offset path and increasing the size of a letter. when creating an outline of that new letter the outline remains the same as the original. How do I create outlines to the shape of the new path not the original??
View 3 RepliesHere's an extremely simple example.. It works with a circle or a square, obviously because it has the same height and width. The problem is when you have irregular shapes, (or in this case, an oval). I know I've seen solutions to this in the past, but I just can't think of how to word this question and find them again.
I know you can create multiple strokes for an object in the appearance palette, but I'm looking for something more effective than just having colored stroke > white stroke > colored stroke> white stroke > etc.
Here's a couple examples of the kind of effect I'm looking for.
I'm using Illustrator CS4. I am unable to Create Outlines for a font after I had used the type on the Path Tool. I had used the ellipse tool to create a closed circular path, then I selected the Type on a Path tool. I selected my text using the arrow tool and ctrl-shift-o (Create outlines) and then I receive the message: "Can't Create type outlines." Not quite sure why this is happening. Did I miss something? The thing is this - my type is in the position and alignment that I want and I don't necessarily want to work with the Type as a Font but as vector shapes.
View 3 Replies View RelatedI want to join two paths to create a shape that I can fill but at the same time retain one of the original paths (the red one in the image below). I can copy the path I want to retain but surely there is a more elegant solution. See below for for an illustration:
View 6 Replies View Relatedwhy in CS6 some vector files have this odd outline around shapes. It's visible when editing the file, exporting the file & placing it within Photoshop as a smart object.
View 9 Replies View RelatedIs it possible to script the menu item Object/Path/Outline Stroke?I need to cycle through all the Path items in the document and convert them to Outlines.
View 2 Replies View Relatedhow do you create outlines from strokes in cs5
View 7 Replies View RelatedI am creating a layout in Illustrator 13.0.2 on a Mac and trying to use the Eurostile font I purchased at the Adobe font store. When using this font "Create Outlines" is greyed out and nothing I've tried has changed this. However, when I change the font "Create Outlines" returns to a viable selection. This leads me to believe the problem lies with the font. Embedding for this font is listed as "Preview & Print" at the Adobe store - it would seem this should be sufficient. I'm certainly no Illustrator expert but there isn't anything unusual about this document.
View 3 Replies View Relatedstep 1: I'm writing a word and then i'm using the effect ‘create outlines‘ in the type menu.
step 2: after that I'm using the filter ‘round corners‘But not all corners are round after that. I've problems with the letter ‘S‘. Just 2 corners are round and the other two are unchanged.
Several functions are greyed out (unusable) when trying to Add New Fill or Create Outlines. What could be causing this?
ADD NEW FILL
EXPAND APPEARANCE
CREATE OUTLINES
Is there a reason why when I convert a font using create outlines, this is happening with Stempel Schneidler btw, it appears to add a bit of weight to the type? I've never run across this issue before. I first noticed it when I printed out the document. It all of a sudden seemed heavier compared to the font normally. The problem becomes much more pronounced at a small scale. I notice it onscreen AND when I print it. I wouldn't normally create outlines but the letterspacing is pretty tight on this and I need to make a TY ligature.
View 2 Replies View RelatedI'm playing with the 3D tools in Photoshop CS5 Extended for a friend. He provided an .obj file of a tool part and it opens just fine as a complex, shaded object.
Question: Is there a way to generate simple outlines of the object and export those outlines as paths to Illustrator?
Level: Newbie OS: Windows 7 64bit Ia: Cs6
in short ...
I have made two objects, a vertical elongated ellipse with a circle placed on top that covers a bit of the ellipse and then i made a mask via Ctrl + 7
afterward I want to select the path of the circle and then use the Offset path twice to create two new paths but i want to Delete the first/original path.
however, no matter what i try i cannot seem to Delete the original path. ????
i have searched the manual, FAQ's and even used Google to try and find an answer.
I don't know if i am not asking the right question(s) or what but it seems as though a path cannot be deleted.
after doing ... say ... selecting the path in the layers panel and then clicking the trash can icon at the bottom of the layers palette the Edit menu will indeed say that the path has been deleted ... but ... when i hover over the area ~ the path is STILL there!!??
paths cannot be deleted? i would think if they could be that the manual would have some sort of info.
i find things like ... how to delete part of a path, how to delete anchors ... i mean everything but what i need to know.
why cant illustrator create outlines of fonts not installed on the computer when opening an eps or pdf as corel can?
View 2 Replies View RelatedI can't figure out how to create outlines (vector lines) for my patterns , as I need to laser cut the pattern, and all the lines have to be seen I use Illustrator CS6.
View 3 Replies View RelatedI have created a test roof for use (not right colour scheme) I have created as a two dimensional object.
I have created a house in perspective and need to create the shape below with the one above:
I don't want to distort my roof. There are lots of layers and paths as you can imaging creating a tiled roof.
how to get this without distorting my roof?
i want to have multiple offsetoutlines on a closed or non-closed path. with "offset path" i can make only one additional outline but i need multiple?
i searched all over the net for answers with no success.
Is there a new way to fill a shape or path with text in CS6.
When I create the path I can put my text tool "over" the path & my cursor switches to a curved line through the cursor, but when I place the cursor "inside" the path it just goes back to regular cursor & if I click inside it just starts a new (regular) text layer.
In older versions as soon as I placed my text cursor inside the path it would switch to the text cursor inside parenthesis. And thus type inside the path. That doesn't happen anymore.
How do I create a fixed size Selection, Shape or Path?
View 1 Replies View RelatedI use the path tool to create the shape of the text line I want to curve. I enter the text I want with the font, colour, etc, and select text along path. The text goes where I want it, but no matter what I have tried, the text colour along the path (my curved text) is always red and it doesnot look like the font in my text area. I can change the font / colour of the original text which works great, but the text along the path doesn't seem to change.
View 5 Replies View RelatedI have some negative space I created(black area, see first image) that I want to fill with type, not just a simple fill.
Basically I want to create the negative space from a bunch of small minus signs(-) that need to line up as they go across. If I type on each path one at a time as the text doesn't line up that way. This needs to be one continuous path. (see second image)
Unfortunately if I add them together, it creates a compound path, which you cannot type on, unless I am mistaken? So I need them to be a path, not a compound object.
How to make something like this logo: [URL]... (also attached below in case link d/n work)
I tried using the line selection tool to create a stroke path in the shape of the design I wanted, but I can't get it to emulate this brush (it always just fades to opaque instead of tapering to a point).
I have to make an illustration with a 2D text that rolls on a 3D cilindric path. I don't know if is it possible on AI. Maybe I have to do this on a 3d software?
View 3 Replies View RelatedI have been playing around a bit - and think the answer lives somewhere in compound paths, but can't quite get it right.
In the example below, I essentially want the anter to cut out it's outline shape into the axe. Same with the shield over everything.
This is essentially so I can place the logo over all sorts of backgrounds, without having to have a white outline on it.
Cs6 here.... I am trying to cut out a simple shape to allow the area under the shape to be trasnparent or Alpha. Like a Mask. Except when I use the Mask it does at it should do and mask the area where the shape is and MASKING or removing the areas not under the mask. I tried Compound path but I am not getting any result from it. My shape stays right on top of my work and does not "cut it out" to allow the Background to shine through as an alpha channel. See pics for clarity. I want to reverse this where the circle is cut out and the rest stays visible...
View 11 Replies View RelatedI'm doing an offset path command on a random shape and I need to repeat that in 4mm increments. I noticed that this command is far from accurate. To be as precise as possible I copy the base shape, paste it in front, apply the offset path command +4mm, +8mm etc (since the shape has round edges I chose round and a miter of 5000), and expand appearance. However, at 8mm expansion the round curves become pointy curves and therefore not mimicking the original shape.
AI CS6 latest
OS 10.7.5
I want to make the A shape as if it was composed from the grouped hexagons from B. the hexagons from B are grouped and the shape from A was made from two elipses and function Minus Front prom pathfinder.
I've tried all the functions from pathfinder in all ways but some don't give a result(I don't need explanation for this) and some do not work as I wish.
I got this error many different times and the problem still continues.
When I change the stroke weight from the Strokes menu arrows or by scroll, this action changes my path's shape and distorts it. You can see the problem below:
I got similar errors when scaling a couple of times. But this one looks just impossible to me.
I was trying to make a logo and for doing as I sketched it I thought Offset path will do. But unfortunately it didnt. By using this feature repeatedly the shape is losing its initial form. This is what I want (as concept) but as you can see the shapes don't have the same form as the original cloud:
I know is almost impossible to make this without any distortion, but I was wondering if there is any other methond with less shape deformation.
I want to simplify part of a complex shape. Is it possible to isolate part of a shape path and simplify it, leaving the rest of the shape with the original number of anchor points?
View 8 Replies View RelatedI am new to AutoCAD and have just finished using AutoCAD Plant 3D to model a basic plant for my 4th year chemical engineering design project. However, every shape I have drawn has a white outline around all the edges. Is there a way to remove this so I can take a screenshot for my report.
View 3 Replies View Related