I want to simplify part of a complex shape. Is it possible to isolate part of a shape path and simplify it, leaving the rest of the shape with the original number of anchor points?
View 8 RepliesI have a figure as below:
You can see that the red circles intersect the blue one twice each. One of these intersects (the lower one) should be below the blue circle while the other should be above the blue circle. How can I make this happen? Can I use the shape builder tool somehow?
I'm trying to repurpose some artwork and am running into an issue. In the image below, I simply want to delete the bottom right corner of the blue box so that the orange background is visible along the right edge of the curved shape and the blue box is visible along the left edge of the curved shape. But I cannot figure out how to do this. I've tried all the Pathfinder choices and none work. How can I do this? CS6, Windows 7.
View 12 Replies View RelatedIf you are using the new BW adjustment filter, can you control how much of the cyan goes in one part of the image, and how much goes in another part of the image?
View 7 Replies View RelatedI have a seascape photo with an island in the middle of the water. think of a black triangle surrounded by sparkly waves. I want to isolate the exact shape of the island so ONLY the island can be lightened a bit. Is there a nice video tutorial showing what that process is? tried some things in photoshop like the lasso tool but I could not get the island shape traced exactly enough. something similar in Photo paint?
View 3 Replies View RelatedI have to make an illustration with a 2D text that rolls on a 3D cilindric path. I don't know if is it possible on AI. Maybe I have to do this on a 3d software?
View 3 Replies View RelatedI have been playing around a bit - and think the answer lives somewhere in compound paths, but can't quite get it right.
In the example below, I essentially want the anter to cut out it's outline shape into the axe. Same with the shield over everything.
This is essentially so I can place the logo over all sorts of backgrounds, without having to have a white outline on it.
Cs6 here.... I am trying to cut out a simple shape to allow the area under the shape to be trasnparent or Alpha. Like a Mask. Except when I use the Mask it does at it should do and mask the area where the shape is and MASKING or removing the areas not under the mask. I tried Compound path but I am not getting any result from it. My shape stays right on top of my work and does not "cut it out" to allow the Background to shine through as an alpha channel. See pics for clarity. I want to reverse this where the circle is cut out and the rest stays visible...
View 11 Replies View RelatedI'm doing an offset path command on a random shape and I need to repeat that in 4mm increments. I noticed that this command is far from accurate. To be as precise as possible I copy the base shape, paste it in front, apply the offset path command +4mm, +8mm etc (since the shape has round edges I chose round and a miter of 5000), and expand appearance. However, at 8mm expansion the round curves become pointy curves and therefore not mimicking the original shape.
AI CS6 latest
OS 10.7.5
The logo I'm working on requires part of some "complex" shape.
When I use the Knife tool (with the shape selected), it doesn't split: the line down the middle is just a guideline* and when I use the Erase tool, the lines become curvy.
For example, if I created a square and wanted the 2 sides and bottom to be 1 pt stroke and the top to be 0.5 pt stroke or no stroke - is this possible?
View 6 Replies View RelatedI use Illustrator CS6, I used the pen tool to create an elipsoid "shape" by creating a path and giving it stroke and fill, I made a second one ot top of the first, now the second one covers the first at about mid level and I want to cut the top part of the first shape/path, that is showing, off.
I have tried with various methods but with strange results.
I don't find a way to isolate and undo isolate an occurrence in Assembly, looking for the right code in VB.
View 4 Replies View RelatedI want to make the A shape as if it was composed from the grouped hexagons from B. the hexagons from B are grouped and the shape from A was made from two elipses and function Minus Front prom pathfinder.
I've tried all the functions from pathfinder in all ways but some don't give a result(I don't need explanation for this) and some do not work as I wish.
I got this error many different times and the problem still continues.
When I change the stroke weight from the Strokes menu arrows or by scroll, this action changes my path's shape and distorts it. You can see the problem below:
I got similar errors when scaling a couple of times. But this one looks just impossible to me.
After using the path tool to create offset path and increasing the size of a letter. when creating an outline of that new letter the outline remains the same as the original. How do I create outlines to the shape of the new path not the original??
View 3 Replies View RelatedI was trying to make a logo and for doing as I sketched it I thought Offset path will do. But unfortunately it didnt. By using this feature repeatedly the shape is losing its initial form. This is what I want (as concept) but as you can see the shapes don't have the same form as the original cloud:
I know is almost impossible to make this without any distortion, but I was wondering if there is any other methond with less shape deformation.
I am working on a file where there are kangaroos that are compound paths. I need to stroke only parts of them. Is there a way to do that? Should I just manually be drawing paths that go right up to the edge of the compund path (drawing my own stroke)?
View 9 Replies View RelatedIs it possible to rename a path as part of an action?
View 1 Replies View RelatedIllustrator CS6.
I did the fish body outline. Then I decided I needed to change the path by the head. I want to join the inside line to the body outline and eliminate the path on the head portion. I need the finished outline to e a closed path so I can do a clipping mask. I have tried the "join" cmd but it wants to add a straight line between the bottom and top.
Is there a way to accomplish what I am wanting to do?
i'm trying to build an easy way to create something like the following network graphic in Illustrator:
I basically want to create a brush or some other automatic method for adding a specific shape (in this case a circle) at every point a long a path. It would be nice if I could easily move around points on a path without have to move all of the circles independently.
I tried creating a pattern brush where the circles were the corner elements but depending on the angle of the corner the shape would get distorted.
How do I offset the path of a random shape (for example the outline of a guitar) without having it automatically inset the path as well? Is there an easier way to delete the segments of path I don't want than double clicking continuously with the white arrow?
View 10 Replies View RelatedSo im attempting to square part of a rounded square, but leave some sides curved. The problem is I've got a small square to cover the curved square and I have aligned it and yet there is a blured edge that shows its not in line.
View 2 Replies View RelatedIs there a way to remove redundant points whilst maintaining the exact shape of the path?
After using Pathfinder or Expand there are often many redundant points which can't be removed using Simplify or Unite.
The VectorScribe plugin has a Smart Remove Points feature which is exactly what I want. I'm presuming the only way I can get that feature is to buy the plugin.
A simple example is shown below: The path is part of an exact circle and I need to remove one of the anchors.
Using: WIN7, Adobe CS5, PS, AI
When I need to move a project from Photoshop to Illustrator, I need an automated way to prep shape and vector mask items for export--preferably preserving the structure and layout that already exists as layer names and order, character and paragraph settings, and of course global registration. My scripting is limited to recording actions, so I need to find an existing script or get coached on this. Any recommendations?
I have googled and waded through numerous forum posts trying to research this on my own, so I know about the ability to export my path collection, but that's usually inapplicable in reality. It only deals with vectors from the Paths palette. In Photoshop, I use the Paths pallet to store master and WIP paths, but all the working paths are either shapes or vector masks--or active type layers. Often enough that it's become an issue, I'll need to move the whole project to Illustrator. Obviously, the process has issues; I'm not expecting the rastor layers or Photoshop styles to carry over, but I see no reason why I can't capture text, shape and vector mask elements.
They all have a vector component, but simply opening a PSD in Illustrator flattens (badly) the layers. I select the "Convert Layers as Objects" but have yet to see it extract editable text. I'm not sure if it even attempts to do anything with vector shapes or masks. I've got a process for moving a project one element at a time, using registration marks--but this requires turning text into shapes most of the time, especially if I am trying to preserve kerning and leading crucial to the layout. Maybe I just have not found the right info, and there is a way to transfer editable text without losing character and paragraph settings.
For now, I'd be happy to stop wasting time doing a ton of conversions and renaming by hand, just so I can preserve the work I've already invested.
One suggestion, posted under a multiple path export question, was to use scripting... but no one explored or explained how to go about it. I'm not asking for the impossible, however. I simply working out my own solution: if there is no application method for transferring the elements, try to script a method to prep those elements for export. Before I even attempt to reinvent someone's wheel, I am putting the question out there:
I kept at it and managed to open my current project PSD in AI with text and shape/mask vectors successfully--not as cleanly as I'd hoped but the relative positioning of things was acceptable. I am still interested in hearing people's suggestions on better ways to transfer work from one tool to the other, though. I know this is going to come up for me again and again.
i have a problem with path edges after using shape builder tool or masking objects. This problem occurs when i draw bright colored objects above dark colored object. After that i have dark path's edges. Like this: [URL] I have one solution (pathfinder->dive objects and delete some dark elements on the bottom).
View 3 Replies View Relatedputting a crescent shape on a spiral path and applying a rainbow gradient?
View 9 Replies View RelatedI'm making a picture and I have a problem - I need a maximum of 2000 anchor points, and I have about 11k.
Seems like I have a lot of unnecessary points, but when I try to simplify the picture gets all messed up. Any other way to fix this?
Here's part of the picture, you can clearly see that a lot of the points don't have to be there..
Using CS5. I have a solid shape with a hollowed center (see far left image). I applied a transform effect to make it look "3D" by offsetting it slightly 32 times (see middle image. see far right image to see what it looks like selected). I want to simply have the middle image, but without all the paths and lines - I just I want it outlined. I tried to expand it, group it, pathfinder-add - nothing seems to work.
View 12 Replies View RelatedWhen I use the simplify tool I get a small loop added to some corners of closed paths. It's such a great tool for what I do but it's basically useless like this.
The original
After applying simplify:
And zoomed in to a few of the corners:
What is the difference between the Smooth and Simplify tools? Is the Smooth tool the same as Simplify but without the dialog window to set the parameters?
View 3 Replies View Related