I have a figure as below:
You can see that the red circles intersect the blue one twice each. One of these intersects (the lower one) should be below the blue circle while the other should be above the blue circle. How can I make this happen? Can I use the shape builder tool somehow?
For example, if I created a square and wanted the 2 sides and bottom to be 1 pt stroke and the top to be 0.5 pt stroke or no stroke - is this possible?
View 6 Replies View RelatedI use Illustrator CS6, I used the pen tool to create an elipsoid "shape" by creating a path and giving it stroke and fill, I made a second one ot top of the first, now the second one covers the first at about mid level and I want to cut the top part of the first shape/path, that is showing, off.
I have tried with various methods but with strange results.
I am working on a file where there are kangaroos that are compound paths. I need to stroke only parts of them. Is there a way to do that? Should I just manually be drawing paths that go right up to the edge of the compund path (drawing my own stroke)?
View 9 Replies View RelatedIs it possible to rename a path as part of an action?
View 1 Replies View RelatedIllustrator CS6.
I did the fish body outline. Then I decided I needed to change the path by the head. I want to join the inside line to the body outline and eliminate the path on the head portion. I need the finished outline to e a closed path so I can do a clipping mask. I have tried the "join" cmd but it wants to add a straight line between the bottom and top.
Is there a way to accomplish what I am wanting to do?
I want to simplify part of a complex shape. Is it possible to isolate part of a shape path and simplify it, leaving the rest of the shape with the original number of anchor points?
View 8 Replies View RelatedOnce you've used a path to put type on, how do you get the path back? Everything I do to recover the path deletes it.
View 2 Replies View RelatedIs there any function or script that auto-adjust tracking so text on a path meets the exact end of the path/bracket?
View 4 Replies View RelatedI have an atari gaming joystick and its all one object and i want to be able to make the joystick tilt to the left.. I somehow need to separate the joystick from the rest of the object..
View 7 Replies View RelatedI need to cut a part of one path and paste it as a part of another path. Is there a way in GIMP for doing this? Currenty, all what I can do is to select required anchors of the source path. Then, all I can do with this selection is moving it as a whole. The commands "Copy path" and "Paste path" ignore selection and work with entire path.
View 2 Replies View RelatedI'm building a test track to use on a driving simulator.I'm trying to apply banking to the corners. The track's path is a loft with it's path defined as a line, and the loft shape is a rectangle to represent the cross section of the track. I'm trying to apply banking to the corner by using a different shape part way along the loft... however, the result is that the track twists the wrong way so that the top of the track becomes the side and vice versa.
[URL]
Autodesk 3DS Max 2012 Student Version
This is beyond CAD; but I figure it wouldn't hurt to ask. Can Inventor track a part in an animation and plot the resulting path? This cycloid is a good example (the red curve):
[URL]
The part i make is from solid model>The part needs to be in sheet metal.What steps do i use to make as sheet metal part and have option to flatten part.
View 1 Replies View RelatedI have a part that has protrusions. When i mate that part up to another part that second part needs to have cutouts/holes to receive those protrusions.
i mainly use it in sheetmetal parts. and use the rectangular protrusions on de contour to mate up with corresponding cutouts in the other sheet. this works with positioning and also makes for a nice weld spot/area.
But also for making holes to accommodate a mold pin used in custom punch dies. I want the intervening part to receive a corresponding (propperly tolleranced) hole automatically. Much like a bolted connection does.
same for parts like circlips. i want them to automatically generate the seat in the part it's mated to. Rather than using the axle generator.
Ofcourse one can place the parts and do an in assembly interpart projection and go from there, but i want the part to generate the (predifined) modification to the other part. It would save time and also reduces problems as the parts are moved about or even removed.
I'm modeling a temperature gauge and would like to have glass over the gauge so the inside is visible. I can easily do this with an assembly, but I'm wanting to do this with a single part. I tried to derive a new part from the assembly, but the transparent part turns solid so nothing inside is visible. Is it possible to do this?
I've include pictures of what I want and what I end up with.
Inventor Professional 2013
Intel Xeon W3680 @ 3.33Ghz
12GB DDR3 RAM
NVIDIA Quadro 2000 GPU
Windows 7 Professinal 64-bit
I have created the part based on piece of standard angle taken from library. Now I want to make a mirrored copy of this part by Component-Mirror.
Inventor does not let me do it with standard part.
The question is: How I can transform a standard part to normal one, I mean I could get rid of belonging to standard part? Making a copy does not work. The only way is to derive and mirror this part but I wish there could be easy way.
I have some negative space I created(black area, see first image) that I want to fill with type, not just a simple fill.
Basically I want to create the negative space from a bunch of small minus signs(-) that need to line up as they go across. If I type on each path one at a time as the text doesn't line up that way. This needs to be one continuous path. (see second image)
Unfortunately if I add them together, it creates a compound path, which you cannot type on, unless I am mistaken? So I need them to be a path, not a compound object.
In illustrator, is there a way to reduce anchors points in a segment path without altering the path?
Is there a better and more efficient way to reduce anchors points than using the pen-minus tool?
I've tried every permutation of copy and paste; I renamed the path to path. It looks like a path when I add stroke, but it does not behave like one. I can't cut it or join it to any other path. It remembers it's text path status. I'm running OS X 10.7.5.
View 11 Replies View RelatedI accidentally converted a path to a text path. I searched the forum for how to convert it back to a regular path. The answer I found said to select the path and hit Command+C+F. This gives me another text path! I now have at least 6 copies of the path in my files but they are ALL text paths and none are visible with a stroke.
View 5 Replies View RelatedI've got two paths. They don't intersect, exactly, a straight path ends at a curved path, but I need the end of the straight path to be curved, to make it look like the two meet perfectly. The two gray paths (a single path, then path->offset for the second) are the outside of a shield shape. The two black lines (paths) just surround text, but currently they overlap the gray paths.
View 2 Replies View RelatedI know in photoshop you can make shapes with the pen tool and then covert them into a selection path.I was wondering if there is such similar feature in Illustrator
For example with the picture I posted here, what I want to do is be able to select the objects that are in contact with the black object on top without having to individually select them or use the "lasso" tool
It would make things easier with a "Select all objects under or above" option, theres only the "Select next object under or above"
Is it possible to make unseen part of the 3d object into dashed line or broken line?
View 9 Replies View RelatedI have a created a spiral path and added type to it. This spiral circles a planet-like object. This object is not completely circular, therefore overlaps some of the spiral. I would like the type on the spiral to wrap these protrusions. And I have tried the usual way of applying a text wrap (object > text wrap > make). The type on path doesn't seem to recognize the text wrap.
View 3 Replies View RelatedI'm redrawing the Realtor Logo which is a simple square, and inside that are a rectangle, triangle and a semi-circle with a flat edge on the left. When combined, look like the letter R reversed out of a black box. When I select the all the elements and tell it to make a compound path, only the rectangle knocks out the background square and the semi circle and triangle just appear to be grouped with the square instead of knocked out!!! I've tried everything including moving the square to the front and the back, etc. How do you find out if the semi circle I drew is a closed path? I made the semi circle by drawing a circle and a square and then using pathfinder to edit them into a the left flat edged circle. The triangle I simply drew with the pen tool.
View 6 Replies View RelatedObject - Path - Join dialog box asking if smooth or corner path is not showing up in CS5. How to get it bac/activate it?
View 5 Replies View RelatedI am trying to record an action to find the center of a polygon with the following commands
1. Select the object
2. Copy and Paste in Front
3. Select > Object > Direction Handles
4. Cmd+X (Cut); do not deselect
5. Object > Path > Average: choose both axes
6. View > Guides > Make Guides
All is good & well except that step 5 never gets recorded as an action step.
I'm working on a project and I need to use the free distort tool + ctrl (command for mac users) but it won't work. I found out that I need to convert it to a smart object, from another disscussion, but right clicking the name of it in the layers menu isn't working. I'm using CS6 by the way.
View 10 Replies View RelatedI have cutout an object (Duck) from a photo in Photoshop and now i want to use it for a wall decal. So now i need a vector file with path around contours of the object (Duck), but how can i do that exactly because the shape is very complex?
View 3 Replies View RelatedWhen I use the pen tool to make a path with a fill, the fill updates immediately and correctly, but the path highlight (which usually displays as long as I'm working on a given path) only shows up when I hover my cursor above the path itself. Also, and this is a lesser issue, Illustrator's splash screen displays "Tryout." It came with CS6 MC, and none of the other apps are in trial mode.
View 1 Replies View Related