AutoCad 3D :: Make Unseen Part Of 3D Object Into Dashed Or Broken Line
Jul 27, 2011Is it possible to make unseen part of the 3d object into dashed line or broken line?
View 9 Replies
ADVERTISEMENT
AutoCAD LT :: Drag Out Dashed Line From Point Which Can Be Snapped To Another Object
Dec 5, 2012ACAD LT 2009, Win XP Lately a feature I am used to seeing has quit.Basically when you hover over a point of a line, a little cross mark appears and you can drag out a dashed line from that point which can be snapped to another object. Handy for finding perpendicular intersections. Whatever this is it no longer works. How do I get it back?
View 2 Replies View RelatedGIMP :: How To Make Vertical Dashed Line
Jan 16, 2013I know how to make a solid straight line using the pencil tool. I know I can create a shape with a border using stroke and select area. But...
How do you make a straight vertical dashed (dotted) line?
Something about paths and holding down the shift key, but that doesn't do anything, no line shows and it doesn't like "snap" to a vertical position.
I'm trying to make a dotted line to be line a guide line for cutting when you print the image out on paper. Like the perforated line on a movie ticket or boarding pass.
Paint.NET :: How To Make Dashed Line Or Flying Trail
Jul 21, 2012I want to make a curved/ wavy dashed line, picture the trail behind of a bumble bee [my first picture is an example]. The closest thing I have gotten was that I downloaded the dpyplugins6.1 and used the wavy text using the '-----' dashes but instead of the dashes following the curved line they are all parallel and in a wavy fashion [my second picture is a example.]
View 4 Replies View RelatedIllustrator :: Unwanted Line Appear To Close Object After Deleted A Part Of Line Of Object
Sep 27, 2013why is it when i cut and delete a line from an object, after the line is deleted, there is another line appear automatically , and i can not select the line itself. how do i keep the object from closing??
View 2 Replies View RelatedAutoCad :: Make Polyline Object Instead Of Line Object?
Oct 15, 2011I want to Make Polyline object instead of Line object. How to change the object?
View 1 Replies View RelatedAutoCad :: How To Change Line From Solid To Hidden Or Dashed Line
Sep 7, 2013I must be missing something fundamental when trying to change a line from a solid line to a hidden or dashed line in Autocad 2000. I use the ltype command then load either Hidden, or dashed ISO,or both, and invariably the scale is way off in that I always end up with a still solid line, after using modify properties. After all that, every line I draw after that comes out dashed. Maybe I should fool with the layers? Is there a basic procedure I should follow here?
View 2 Replies View RelatedAutoCad :: Change Solid Line Into Dashed Line
May 24, 2012I imported a file from ai. as dxf. Now, I want to change Solid line into dashed line. I tried doing it with properties, checked its scale. But it is still not changing.
View 3 Replies View RelatedIllustrator :: How To Cut Part Of 1 Object And Make It Into 2
Jan 12, 2013I have an atari gaming joystick and its all one object and i want to be able to make the joystick tilt to the left.. I somehow need to separate the joystick from the rest of the object..
View 7 Replies View RelatedAutoCAD Inventor :: How To Show A Feature Of A Part File As Dashed In A Drawing
Jul 18, 2013How to show, if it's possible, a feature of a part file as dashed in a drawing?
View 2 Replies View RelatedAutoCad :: How To Draw A Dashed Line
Nov 4, 2011I have created a layer for the dashed lines, but they continue to be solid lines.
View 9 Replies View RelatedAutoCad :: Dashed Line In Paperspace Layouts
Feb 21, 2013i have a bunch of sheets set up, and you can see a white rectangle with a shadow that i guess represents my page, and then in this page there's a dashed rectangle that i'm guessing has something to do with margins or something. i would like to turn this dashed rectangle off, if possible.
secondly, my sheets are set up for 11x17.. i was given a title block drawing to use. the title block was drawn in modelspace at 11x17. i copied it into the sheet and it seems to be the right size. there's an 11x17 rectangle that the titleblock sits in, and i'd like to line this up with the actual page (to make sure the titleblock is in the right spot).. however i can't seem to snap to the corners of the white page with the shadow.
AutoCAD 2010 :: Can't Produce Dashed Line
May 21, 2012I can't seem to produce a dashed line in CAD 2012 ! No matter what the scale. I can load one ok but it dosen't display as dashed.
View 4 Replies View RelatedAutoCad :: Hidden Lines On 3D Object Dashed
Jun 28, 2012I need to have hidden lines on a 3D object dashed. So basically I need all the lines but those lines that are at the back of a cube(wich are normaly hidden), they need to be dashed. See the attachment
View 9 Replies View RelatedIllustrator :: How To Make Part Of Path Be Below And Another Part Of Path Be Above Another Object
Feb 6, 2014I have a figure as below:
You can see that the red circles intersect the blue one twice each. One of these intersects (the lower one) should be below the blue circle while the other should be above the blue circle. How can I make this happen? Can I use the shape builder tool somehow?
AutoCad :: DWG Hidden (dashed) Line Prints Only As Solid
Mar 27, 2013In the attached drawing you'll see I am trying to print a wireframe view of a 3D object with hidden lines displayed as dashed...in paperspace with an MVIEW viewport. To achieve this, I created a custom visual style called "3D Wireframe with hidden lines" because AutoCAD Mechanical doesn't come with a view preset that will do that for some reason. Even though the viewport looks perfect in paperspace, and is set to print "as displayed", the drawing prints (and previews) with the dashed line as solid instead.
I know I could use VIEWBASE to create a drawing view with hidden lines set to "visible and hidden", but that doesn't mean I don't want to know why AutoCAD is doing this strange behavior with standard viewports.
AutoCad :: Dashed Line Is Solid In Paper Space?
Jul 11, 2012I drew a dashed line in model space and it appears as a solid line in paper space. What is going on?
View 4 Replies View RelatedAutoCAD 2010 :: To Adjust Linetype Scale Until Dashed Line
Dec 13, 2012To adjust the line type scale until dashed line appear as fine or coarse as desire,Type:-
Ans - a) LSCALE b)LINESCALE c) LTSCALE d) None of the above.
AutoCad :: Dashed Line (view Area) Changes On Page Layout
Mar 1, 2011Why the dashed line (view area) changes on a page layout between plotting to pdf and plotting dwg to pdf? I have a title block that measures 16.25 x 10.25 that will print fine to pdf (for 17x 11). This same block will not print completely when using dwg to pdf.
In creating the page layout for pdf (only)the offset is .125 x .125. Once created, if I use this layout and then choose dwg to pdf as my plotter I do not have the ability to "fit to paper"
In creating the page layout for dwg to pdf the offset is .228 x .70. When bringing in the title block at 0,0 there is no way for this block to fit inside the dashed viewing line. The amount that this block extends beyond the top dashed line is way beyond what is available at the bottom.
AutoCAD Inventor :: How To Relink A Broken Derived Part
Feb 8, 2012I created a derived part and I broken the link with its parent. Is there a way to relink the two parts?
Autodesk Inventor 2011
AutoCad :: Create Polyline That Has Combined Dashed And Continuous Type Of Line?
Jan 16, 2012So, is it possible to create one polyline that has combined dashed and continuous type of line in one polyline?
View 9 Replies View RelatedAutoCAD LT :: 2012 - Dashed Lines In Model Space Plot As Solid Line
Mar 3, 2013I have drawn a site plan in model space at 1to1 scale. I try to draw hidden lines to show demolition. In paper space the scale is set to 1"=50" to fit on paper. But all the hidden lines plot solid. I had changed LTSCALE, PSLTSCALE, to 1. This problem keeps happening in most every thing I draw.
View 8 Replies View RelatedPhotoshop :: How Do I Get A Dashed Line
Feb 26, 2004I need to create a dashed line in photoshop. How do i get it ?? New to this forum. All I get is dotted lines using a scattered brush.
View 1 Replies View RelatedPhotoshop :: Create A Dashed Line?
Nov 16, 2005how to create a dashed line? or any other line type except for the usual plain line.
View 3 Replies View RelatedIllustrator :: Dashed Line Option Won't Appear In CS5?
Jul 3, 2013I'm trying to get some dotted lines but as you can see from the image when I select the "dashed line" none of the options underneath appear.
how can I get them to appear?
AutoCad :: Build / Download Linetype That Can Display As Thick Dashed Line Surrounded By 2 Parallel Lines
Dec 4, 2009Any way to build or download a linetype that can display as a thick dashed line surrounded by 2 parallel lines on either side of it?
We use them to denote underground stormwater pipes in our survey models.
Currently I need to manually set each line to a polyline, give it a global width, and then draw a DLINE of the same width from endpoint to endpoint. The down side is that not only is it laborious, I also have to set the Z values to zero, so we lose the elevation feature of the pipe in the model.
Ideally it would need to have enough functionality to alter the spacing of the dashes, and the width of the line.
AutoCAD LT :: 2010 Object Selection Broken?
Oct 2, 2013I cannot get the advanced select objects tools to work.
I type:
select <enter>
wp <enter>
Make my polygon, and then I'm stuck in a single item select mode. If I hit enter, they all unselect and I can't do anything. Typing a command (like "m") does nothing.
Typing m <enter>, and then doing the selection yields the same result. At the end of my selection process and I hit <enter>, it sits in the single object selection mode (the little box cursor). Hitting <enter> here again makes the selection dissapear and I'm back to square one.
Photoshop :: Line Tool: Dashed Lines
Jul 14, 2008Can I make a dashed line using the line tool? if not, does Photoshop allow one to make/get a dashed line?
View 8 Replies View RelatedPhotoshop :: [Perspective Dashed] Line In Image
Mar 17, 2008Would you be able to make a dotted line like this in photoshop,
View 4 Replies View RelatedGIMP :: Dashed Line Fading Into Distance?
Oct 16, 2013Imagine you have an image of a landscape, and you want to draw a dashed/dotted border line (such as between two countries) that goes far into the distance. Naturally, the dashes (and the spaces between them) will get smaller. The line probably isn't straight, either.
View 7 Replies View RelatedGIMP :: Dashed Line Fading Into Distance?
Oct 16, 2013Imagine you have an image of a landscape, and you want to draw a dashed/dotted border line (such as between two countries) that goes far into the distance. Naturally, the dashes (and the spaces between them) will get smaller. The line probably isn't straight, either.
View 1 Replies View Related
