Illustrator :: Rename Path As Part Of Action
May 31, 2012Is it possible to rename a path as part of an action?
View 1 Replies
ADVERTISEMENT
Illustrator :: How To Make Part Of Path Be Below And Another Part Of Path Be Above Another Object
Feb 6, 2014I have a figure as below:
You can see that the red circles intersect the blue one twice each. One of these intersects (the lower one) should be below the blue circle while the other should be above the blue circle. How can I make this happen? Can I use the shape builder tool somehow?
Illustrator Scripting :: How To Rename Layer Like Filename (with Action)
Dec 20, 2012rename a layer of illustrator like document file name? (with an action)
View 12 Replies View RelatedIllustrator SDK :: Open Action To Write Down Different Path
Nov 2, 2011 to get Illustrator to open the files I needed (I open various files based on input from the user).Then I want to save them back off again using a variance of the file path of the file that was opened.I am having difficulty getting the file path of the open doc ... trying to use
ai::FilePath aiFile();
sAIDocument->GetDocumentFileSpecification(aiFile);
XCode is very unhappy with me at the moment. It is telling me that I am illegally referencing the FilePath object from inside of my button proc.
I don't know if I have the right includes in the file or have obtained the correct suites for what I want to do.The api reference says not to use the AIFilePathSuite but to use the ai::FilePath as a wrapper instead. Any examples of the SaveAs?
Basically what I want to do is take the file I have opened using the OpenAction and modify the path (take off the file name, and the last folder and then append the new folder name and file name). Then perform the save as (using native file format).
//save the doc as id.ai in a folder named as id to hold supporting files
ai::FilePath aiFile;
sAIDocument->GetDocumentFileSpecification(aiFile);
aiFile.RemoveComponent();
aiFile.RemoveComponent();
std::stringstream out;
out << "\" << displayedLogo->getLogoID().c_str() <<"\"<<displayedLogo->getLogoID().c_str()<<".ai";
aiFile.AddComponent(ai::FilePath(ai::UnicodeString(out.str())));
Illustrator :: Cannot Record Object -> Path -> Average As Action
Aug 30, 2012I am trying to record an action to find the center of a polygon with the following commands
1. Select the object
2. Copy and Paste in Front
3. Select > Object > Direction Handles
4. Cmd+X (Cut); do not deselect
5. Object > Path > Average: choose both axes
6. View > Guides > Make Guides
All is good & well except that step 5 never gets recorded as an action step.
Illustrator :: How To Override Confirmation Message As Part Of Batch Action
Feb 13, 2012I have created an action in Illustrator CS5 that ungroups a radar graph and deletes the axis lines. And I would like to run this action on a batch of 100 files. The problem I am having is that when I run the action, I get the following pop-up message at the ungroup command:
If I click OK, the action continues. But, as part of a batch, it becomes a bit tedious to have to click "OK" 100 times, and it sort of defeats the purpose of running the action as a batch.
I see options in the batch window to override action "Save As" and "Export" commands, but is there a way to have the batch override this confirmation message? I suspect there may be a way to do this with a script, but I am not proficient enough with scripting yet to take that route.
Illustrator :: How To Stroke Only Part Of A Path
Jul 30, 2013For example, if I created a square and wanted the 2 sides and bottom to be 1 pt stroke and the top to be 0.5 pt stroke or no stroke - is this possible?
View 6 Replies View RelatedIllustrator :: Cutting Part Of Path
Jan 4, 2014I use Illustrator CS6, I used the pen tool to create an elipsoid "shape" by creating a path and giving it stroke and fill, I made a second one ot top of the first, now the second one covers the first at about mid level and I want to cut the top part of the first shape/path, that is showing, off.
I have tried with various methods but with strange results.
Illustrator :: Stroking Only Part Of Compound Path?
Feb 11, 2014I am working on a file where there are kangaroos that are compound paths. I need to stroke only parts of them. Is there a way to do that? Should I just manually be drawing paths that go right up to the edge of the compund path (drawing my own stroke)?
View 9 Replies View RelatedIllustrator :: How To Join And Eliminate Part Of Path
Jun 24, 2013Illustrator CS6.
I did the fish body outline. Then I decided I needed to change the path by the head. I want to join the inside line to the body outline and eliminate the path on the head portion. I need the finished outline to e a closed path so I can do a clipping mask. I have tried the "join" cmd but it wants to add a straight line between the bottom and top.
Is there a way to accomplish what I am wanting to do?
Illustrator :: Isolate Part Of Shape Path To Simplify It?
Jan 15, 2014I want to simplify part of a complex shape. Is it possible to isolate part of a shape path and simplify it, leaving the rest of the shape with the original number of anchor points?
View 8 Replies View RelatedAutoCAD Inventor :: How To Rename A Part
Jun 19, 2013I am doing a customization in Inventor for renaming. In assembly i called rename browser nodes and it successfully renamed in browser name, but when i rename the part by opening the part it still remains the same.how to rename a part.
View 6 Replies View RelatedAutoCAD Inventor :: Rename Part To File Name
Oct 13, 2012When I rename a part, the iproperties field under project>part number does not change. If there is a drawing for the part, the part number in the drawing reflects the old part number.
Can I tell inventor to rename the part automatically to the file name as seen in windows explorer? Can I set it to rename automatically in the tree in an assembly environment?
I'm using Inventor 2013.
AutoCAD Inventor :: Rename Browser Nodes Within Part File
Jan 7, 2013Is there a way to rename browser nodes within a part in a similar way that the rename browser nodes tool works in assemblies? I am copying designs with derived parts, after copying the design I can see that the part files contain the correct links to other parts when I open the base component but they display as the old name in the browser which is not ideal.
View 4 Replies View RelatedAutoCAD Inventor :: Rename Browser Node On Part Level With ILogic Rule?
Oct 18, 2011is it possible to rename the browser node on part level with an iLogic rule? I know that in the assembly environment is an Inventor OOTB functionality to rename the nodes to the filename, Part number or the default value.
Inventor Professional 2011
Windows 7 Enterprise 64bit
Dell Precision M4500
Intel(R) Core(TM) i7 CPU Q 820 @ 1.73GHz
8 GB RAM
AutoDesk Smoke :: 3D Path In Action
May 4, 2012I created a 3D text and a 3D path. Now I simply want the text to follow the path (the text should always look at me, so I can read it). But as soon as I connect the path to my axis of my text, the letters are being pushed together. No matter what path settings I try (Look at... etc) the letters don't extend back to their original "position"
Smoke 2012 SAP2 SP4
and
Smoke 2013 SP2 (Smoke Classic Keyboard Shortcuts)
Mac Pro 4,1
OS X 10.6.7
12 GB RAM
NVIDIA Quadro 4000
14 TB RAID (Areca)
Photoshop :: CS6 Action Recording Path Glitches
Dec 19, 2012I was recording some actions for photoshop elements using paths and noticed something strange in photoshop cs6 13.01 on windows 8.
.
Recording an action of filling a path or making a selection from a path, didn't seem to record the settings.
Steps to reproduce:
1. Select the Rectangle Tool and set the option to paths in the tool options bar.
2. Draw out a rectangle.
3. Save the workpath in the paths panel by double clicking on the path thumbnail in the paths panel.
4. Make a new action and hit the record button.
5. Try using the Fill Path (from the flyout menu in the paths panel) with dialog and set to whatever option you want.
(i used 50% Gray in my test)
6. Try using the Make Selection with dialog from the flyout menu in the paths panel.
Neither action seems to record the parameters (settings). Playing back the action uses whatever the last settings were.
I expected the settings to be recored as photoshop 7 does (second action in the screenshot below) Photoshop cs6 13.01 is the first action shown.
Photoshop :: How To Remove Path In Save As Action?
Jul 20, 2009I have some deifned actions in CS4. At one point I would like to save the file at a pre-defined quality. When I record that Save As part it also stores the path where to save the file to. I would like to remove that path. How can I do it?
View 6 Replies View RelatedPhotoshop :: Editing The File Path In An Action
Jun 11, 2008Using photoshop cs2.
I have a few actions to speed things up, but now i need to use the same actions but with different directory structures. Is there an easy way to just change the path used in an action?
I've tried using a hex editor to do the job but, photoshop fails to load the updated action.
AutoDesk Smoke :: Action Camera On Path With Look At
Nov 25, 2013I'm doing an animation with simple camera moves. One of them is a camera moving slightly around an object. I want to make a "look at" or similar, so that the object is always in center no mater where i move the camera. This works untill i connect the camera to a 3D path - then the aim follows the path - not the camera :-|
How can i animate a camera on a path and make the aim stick to a certain location in my scene?An extra question: How can i make an object move at a steady speed on a path no matter how i drew my path (hope this makes sense)?
AutoDesk Smoke :: Path Animation In Action
Sep 9, 2011Is it possible to animate an image along a path? Or can you only track text on a path?
View 1 Replies View RelatedPhotoshop :: Possible To Hide Grid As Part Of CC Action
Mar 3, 2013Is it not possible to hide the grid as part of a Photoshop action? When I perform that step, nothing gets recorded.
View 2 Replies View RelatedPhotoshop :: Naming Files As Part Of An Action?
Aug 18, 2004I've written an action to resize my photos twice for a shopping cart. The first time the image is sized for the full-sized image and I save the file using "save for web" into a folder on my desktop.
Then I size it down one more time for the thumbnail and originally used the "save for web" to save it to a thumnail folder on my desktop.
I just found out that my shopping cart host needs my thumbnail files named with a "thumb_" before the filename. I tried to create a custom "save" feature within the save for web, but it's not working. Is there anyway to add thumb_ to my thumbnail files as part of my action?
I could use filebrowser and batch rename the files after the action completes, but this creates another step in an already full workflow.
Lightroom :: Rename On Import Doesn't Rename Source Images?
Feb 5, 2013Is it possible to have Lightroom rename the source images according to my custom naming convention?
I just imported 278 photos and they are all correctly renamed within Lightroom however the source files retained the original Canon generated names. I want to rename them for backup/in case I ever decide to stop using Lightroom/etc.
Illustrator :: Create Single Path To Type On Not Compound Path From Many Paths?
May 11, 2012I have some negative space I created(black area, see first image) that I want to fill with type, not just a simple fill.
Basically I want to create the negative space from a bunch of small minus signs(-) that need to line up as they go across. If I type on each path one at a time as the text doesn't line up that way. This needs to be one continuous path. (see second image)
Unfortunately if I add them together, it creates a compound path, which you cannot type on, unless I am mistaken? So I need them to be a path, not a compound object.
Illustrator :: Reduce Anchors Points In Segment Path Without Altering The Path?
Aug 31, 2013In illustrator, is there a way to reduce anchors points in a segment path without altering the path?
Is there a better and more efficient way to reduce anchors points than using the pen-minus tool?
AutoCAD Dynamic Blocks :: Prepare Linked Chain Around Defined Path - Rotation Action
Jan 11, 2013I need to prepare a linked chain araound a defined path. (Please have a look at the attached drawing) My idea is to have one element of the chain defined as a dynamic block and to manually "rotate" one side of the chain element. After that inserting the next element (previously aligning the user coordinate system) and "rotating" the right part again to the next position...
After doing the rotation, the block definition will change and the next block will be "disformed". So far no big problem, but the grip of the rotation parameter will stay there and I am not able to "rotate" the right part back into the old position (0 degree).
Illustrator :: Convert Text Path Back Into Line Path In CS 5?
Jan 9, 2013I've tried every permutation of copy and paste; I renamed the path to path. It looks like a path when I add stroke, but it does not behave like one. I can't cut it or join it to any other path. It remembers it's text path status. I'm running OS X 10.7.5.
View 11 Replies View RelatedIllustrator :: Convert Text Path Back To Regular Path?
Mar 20, 2014I accidentally converted a path to a text path. I searched the forum for how to convert it back to a regular path. The answer I found said to select the path and hit Command+C+F. This gives me another text path! I now have at least 6 copies of the path in my files but they are ALL text paths and none are visible with a stroke.
View 5 Replies View RelatedIllustrator :: Ending A Path At The Angle Of Additional Path
Apr 10, 2013I've got two paths. They don't intersect, exactly, a straight path ends at a curved path, but I need the end of the straight path to be curved, to make it look like the two meet perfectly. The two gray paths (a single path, then path->offset for the second) are the outside of a shield shape. The two black lines (paths) just surround text, but currently they overlap the gray paths.
View 2 Replies View RelatedIllustrator :: Make Text On Path Ends Exactly At End Of Path?
Jul 11, 2013Is there any function or script that auto-adjust tracking so text on a path meets the exact end of the path/bracket?
View 4 Replies View Related