This is beyond CAD; but I figure it wouldn't hurt to ask. Can Inventor track a part in an animation and plot the resulting path? This cycloid is a good example (the red curve):
[URL]
I'm trying to create an effect of small text following the outline of very large bold block text (see picture). The idea I had was to first create the 'ME' in very large font as text. Then convert that text to an object / path using "Object -> Flatten Transparency... -> "Convert all text to outline"". Then, select that path and use the "Type along path" tool.
However, when I use that process, the resulting path is a compound path that therefore the Type Along Path tool doesn't work. Any pointers on how to achieve this? The image below I just used the pencil to trace the letters (quick and dirty) but the result is choppy, etc.
I have a figure as below:
You can see that the red circles intersect the blue one twice each. One of these intersects (the lower one) should be below the blue circle while the other should be above the blue circle. How can I make this happen? Can I use the shape builder tool somehow?
I have an assembly inside of Inventor Studio. One of the parts inside of the assembly has a parameter that I would like to animate. When I select the "Parameters" function within the "Animate" tab on the ribbon, I get an error:
"There are no favorite parameters defined."
This worked fine when I tried the same thing with only the part inside of Inventor Studio, but not when the part is included inside of an assembly.
how AutoTrack displays alignment paths
View 4 Replies View RelatedI have a CSV file with lists of positions and rotation angles (over time). I would like to use these to animate objects. The two options I've found thus far are:
- Convert the CSV to the XAF format and import this into the curve editor
- Convert the CSV to WAV and use the AudioFloat controller to assign it to the coordinates
I would think there should be an easier way, preferably one for a controller, but I can't seem to find it. Surely I'm not the first to want to import data; frankly I'm surprised that audio is supported but regular data isn't. The thing is, converting the data to XAF seems to produce an enormous overhead and converting it to WAV is just odd.
What would the appropriate way be? Ideally I'd expect some controller where I can specify a file and some conversion parameters and that'd be it. Does such a thing exist? I'm happy to convert the CSV but I feel like it's probably not necessary - is it?
For some reason when using the path option in inventor studio for camera animation the camera rolls for no reason?? I have created two helical curve sketches around my product, the outer curve is the path for the camera and the inner curve is the path for the target. Both curves are the same height and have 1 revolution. When i play the camera it works out fine untill it hits 1/4 of the way through and suddenly flips 180 degrees so now the camera is upside down, once it hits 3/4 of the way it flips back again to the correct rotation. If i dont create an inner curve for the target and place the target directly in the centre of my product with no path to follow the camera spins all over the place when it follows the curve.
View 9 Replies View RelatedIs there a way to get the position parameters for a Biped COM to play with in Track View? All I get are the rotation parameters.
If that's not possible I'd like to know a way to manipulate the animation between 2 keyframes. The TCB parameters don't seem to be working for this.
I'm trying to use the spline IK system to animate a linked 'train' on a path.
There are 4 segments which are joined with a universal coupling. I can only get one segment to actually follow the path, as the others don't follow at all. I've attached my example file.
I want to extrude a big number of pillars to a rather complicated surface and that works out fine. But each end of the pillars warps around the surface and I want them just to go up to it and stop with a resulting horizontal face.
View 1 Replies View RelatedI'd like to start using the auto-publish feature in Autocad, however the options for the file location are pretty limited. I'd like to set it to something like the following:
../transmittals/current issue/
but the options I'm presented with is either an absolute location, or the drawing folder or subfolder.
Is there a sysvar or a registry setting I can tweak to make this behave to my liking?
Our office has recently moved the folder containing our ctb files. The Plot Style Table Search Path has been correctly set on each computer, however when attempting to plot, Autocad cannot find the ctb files.
Having problem moving and repathing the location of the plot style tables?
when I try and plot drawings from autocad I only get half the drawing, sometimes just a strip of blank paper. This is for standard A0 drawings and custom oversized drawings. Plot preview is fine, the same drawings can be plotted by my 2 collegues. We all have the same computer specs, same program, same drivers, as a department we had new computers about 3 months ago. We use 2013LT. I can plot the drawings but it means using True View to open and plot the drawings (same computer, same drivers, but it works) I repeatedly asked our IT department and finally got them to look at the computer, the answer was "yeah, your right it doesn't work".
Autocad 2013LT
Windows 7 professional
We have a person in the office that would like to create their own .ctb file that we would like to have them to access but they will also need to access our .ctb files (Standard). We currently restrict access to the .ctb files as they can be alterered leading to problems for everyone printing. Is there a way to create another path so they we can have a locked folder of .ctb files and an unlocked folder for .ctb files.
View 2 Replies View RelatedIs there any way to track BOM changes. For instance you have an assembly that was checked in to the Vault. Later revision was made to it. Is there any way to keep track what parts were removed and what parts were added on the latest revision? Is there any tool to get such report?
View 5 Replies View RelatedI've created a motion path animation. In preview everything works well, I then go to create a AVI/WMV file and it builds the video without any problem. When you view the video it always stops in the same place (about 6 seconds in) but the video keeps running for the full duration of 30seconds.
I've tried this several times with different settings but always the same outcome.
When cutting video shots in sync with a music track how can I remove part of a clip and replace with a new shot. I know there is a replace clip facility but there appears to be no way of editing the new clip. What I would like to do is leave blanks in sync with the music and fill in correct length of shot later. The same question for overlaying video shots of an interview and holding sync when returning to interviewee.
View 4 Replies View RelatedIn VideoStudio 6, how does one connect the voice track to the video during the editing process?
My specific issue is that I have to go back and edit material sometimes that precedes the voice track I already have laid down, but when the time frame of the material after my new edit I have to go back and drag the voice track to the proper location. I would like to be able to permanently "attach" the voice track to the specific video clip and have it follow that clip as it is moved, time wise, during the editing process.
Is there a means to make this happen?
PS - I realize there is a work around way - just publish each clip and then rebuild the final project but that is NOT what I want to do.
Actually, I have more than 6 years experience on Catia V5 customization and vb and vb.net catia API's. What I am trying to do know is converting some applications or programs running on catia to the inventor.
The first program deal with the inventor API relating to the SweepFeatures class. So my first problem is about to find the right way to use the sketch3D for the creation of the path which is the input of the sweep method.
(oInvPartFeats.SweepFeatures.AddUsingPath(oInvProfile, oInvProfPath3D, kNewBodyOperation).
I know That is possible to create a path by using the CreatePath method when the input is SketchLines or any guide curve in the 2D Plan. Also, I tried to generate path by using the ProfilePath3D method of the sketch3D class but No way, the AddUsingPath method of the SweepFeatures Class doesn't accept it as path Input.
So I cannot imagine that is limitation of inventor because it was possible to do it by using the seep function of the model tab in the ipart document. How to create the path object as an input of the AddUsingPath method of the SweepFeatures class.
I see that you can split the audio from the video. Can you do the reverse and link the audio back into the video say after you split, cut and mute an off camera scream? It would just make it easier to add clips before the edited one, although it's not all that hard to sync things up.
View 2 Replies View RelatedOr can I? "Link" is greyed out
View 8 Replies View RelatedI have a basic train that I am doing for a project at school. I am doing a fairly advanced extension of this project for some extra credit and I am wishing to make this train be animated.
Since my first name is Jackson, I decided early on to make a track design in the shape of a J (bubble letter). In my class, the only requirement was to make the train go in a straight line.
What I have now: I have two assemblies of both a train, and one of my track design. My thoughts on how to do this. I thought it would be possible to make the train follow a path or something to that effect.
I am having trouble constraining the wire track in the attached picture. I want the track to move naturally when the sliding piece moves, however it folds over on itself and doesn't stay in line. I can't figure out anyway to make it look uniform and move they way it should, is it possible in inventor?
View 5 Replies View RelatedI'm trying to make a constraint allowing the dark smaller cylinder (1) to run in the copper track (2). I want the larger cylinder (3) to be able to rotate around its own axis, while everything is rotating around the Z axis. I've successfully constrained the parts so that all the parts can rotate around the Z-axis but when I constrain the smaller cylinder (1) with the tangent constraint with the track (2) the smaller cylinder is not able to move around on the face, it's just glued to the face.
I want the smaller cylinder (1) to recognize the copper faces as solids (so that it can't intersect the surfaces), this would allow the proper movement. I've attached an image of the parts.
I have been trying to make a train that i made roll on a track. I have seen youtube videos of people who have made their train go around a track (I have the same dimensions as the people in the video through project lead the way).
I have the train constrained to the track with a tangent constraint. How to make the wheels turn on the track (i know how to make the wheels turn, i just do not know how to make all the wheels turn in unison/together and how to make them actually move along the track instead of make the wheels turn in place.
Here is a picture
Within dynamic simulation, I am trying to have a ball follow a track made of (2) rods, I can do it if the rods are straight but I do not know how to properly apply joints to allow the ball to follow the tracks when they are turning. I need to do this within dynamic simulation because I also hope to add a chain and sprockets with a ball holder to bring the ball back up to the top.
View 7 Replies View Related I set up our company log which gets embossed on most parts as a sketch block in an .ipt. The .ipt contains nothing but the sketch block. To use it, the designer only needs to derive the Logo.ipt file into their part and then use the scale setting to set the derived block to the desired size for that part. The result is a scalable set of line geometry that can easily be used for extrusion or emboss that is standard for all users. It works beautifully, that is until you try to use it in a sheet metal part in 2012.
For some reason, when this same part, which works perfectly in normal parts, is derived into a sheet metal part an error pops up stating that, "Selected part does not have any geometry that can be derived." Say what?
I was able to find a workaround by directly copying the block into the sheet metal part, but you no longer have the ability to go back and scale it if needed. Even more strange, when the block was copied over, it could not be deleted from the new part.
Is this just a bug with 2012? Why does it work in a normal part but not sheet metal?
Dear Sir, In particular project, when I insert part in Assembly file, It is inserted as a Tube & Pipe run part. so that It is not Grounded automatically. What is the settings by which I can insert as a normal part in assembly file ? I have attached herewith the JPG file also.
View 3 Replies View RelatedThe part i make is from solid model>The part needs to be in sheet metal.What steps do i use to make as sheet metal part and have option to flatten part.
View 1 Replies View RelatedI`m looking for the iLogic code that can change one parameter (user defined) for each (ipt) part in assembly (iam)
The one below doesn`t work.
Sub Main Dim oApp As Inventor.Application = ThisApplication Dim oAssy As Inventor.AssemblyDocument = oApp.ActiveDocument For Each oSubDoc as Inventor.Document In oAssy.AllReferencedDocuments On Error Resume Next Parameter(oSubDoc, "FH") = 15.26 Next End Sub
I would like to simplify this assembly into one seamless part for FEM calculation:The assembly consists out of parts that, in reality, will be welded together. Due to their form, there is no way to place them exactly onto each other, therefore there are slight gaps between the parts:
Now when I try to merge the assembly into one part via "simplify" --> "create simplified part" and choose "single solid body with seams between planar faces merged", Inventor does not fill these gaps (even though it displays only one part in the bottom right corner of my window). Unfortunately, the remaining gaps brings "contact" problems in the FEM simulation.
how to close the gaps and really merge the assembly into one part?