I'm trying to use the spline IK system to animate a linked 'train' on a path.
There are 4 segments which are joined with a universal coupling. I can only get one segment to actually follow the path, as the others don't follow at all. I've attached my example file.
I have problem with animating camera along a spline using path constraint. The spline has been spline normalized before added to the path constraint. Then I add besier floating to be able to slow down the camera.
The final camera seems to move not smoothly. This can notice especially when the camera are further away from the origin (0,0).
Some says it's because of Max's coordinates is not fine enough which can clearly proved when import autocad file which located very far from the origin into max and most vertex will be shifted from where it should be in Autocad.
I need to rig two objects together that follow one another the same way a train car or truck-trailer rig would. I've Googled for days and have tried several different constraint and skeleton options but haven;t been able to figure this out yet.
View 1 Replies View RelatedI am trying to rotate a set of wheels that are moving like a locomotive train wheel and having problems. I was able to animate the wheels to move like a locomotive wheel by linking and turning off the z axis inherit for the red rod (see attached images. Image ex04.jpg.)
The problem came when it was time to rotate the whole thing. I grouped everything and rotated the wheels around as a group. As the red rod had is z axis inherit turned off once it started to detach from it location(ex06.jpg), which was kind of expected.
I am not sure what to do to solve this problem. Do i create a bone structure with IK handles to resolve this problem or is there something else better to solve this problem?
I don't seem to be able to increase the number of control vertices in an IK Spline. The number of bones in the chain upon which the Spline is set doesn't seem to affect the number of control vertices I have to work with when creating the spline and I can't find a way to increase the number. I'm trying to animate a fish but finding it difficult to get a smooth wave to travel along it's length with only four control vetices.
View 2 Replies View RelatedI'm trying to scale a spring (which is actually a renderable spline). I want it's scalable boundaries to be controlled by two other animated objects.
I thought a simple FFD modifier with a linked xform modifier to the control points would work, but unfortunately it won't let me link control points.
I'm trying to attach an omni light to a spline(???) path for the light to follow.
View 1 Replies View RelatedI've got a 2 bone chain that I have attached a spline IK to with a flex modifier on the spline. This was working pretty well however, once I skinned the mesh to these bones I noticed that when I rotated the 2nd bone it would seem to pop on a different axis. It was hard to spot at first because it popped between 2 frames, popped 90 degrees and seems to happen at the same rotation amount (can't recall exact degree at the moment).
I turned off the flex modifier and it is still popping so I'm assuming it is from the spline IK. Is there a way to prevent this?
I am working on a rig right now and I'm trying to do the Isner Spine from the Body Language Advanced 3D Rigging Book.
I did the Spline IK with the spine and I have everything stretching fine but when I made the CVs into clusters and parented them to the controls, when I got to translate the rig, whether I use the Root CTRL, Main CTRL, or whatever, the spine translates twice as fast as everything else. The clusters and everything in the lower body moves normal and everything about the head is moving normal..
I know in other situations with curves you have delete history but I can't delete history on the joints and I can't come up with any solution. I can attach a file.. not all the controls are done right now and I haven't reparented the wings correctly so just ignore that.
I have a skeleton with baked motion capture keys on every frame. I'm wondering if there is a method to convert these baked keys to curves, so it will be possible to start cleaning up the animation. I'm fairly new to dealing with mocap. Perhaps there is a method for achieving this in Motion Builder rather than Maya, that I'm not aware of?
View 2 Replies View RelatedI have a woman with her arms spread and a cloth starts follow a defined path around her and her arms.
Is there any way to do that in max?
How to stop an object from flipping along a Path Constraint. I have a pflow source traveling along a circle path. Half way along the path it flips shooting the particles the other direction.
View 4 Replies View RelatedSo I have been trying to use path deform but it alters the shape of my path...? I try to line up the pathdeformed object back up with the original path and it's barely close I can't figure out why it changes my path....
View 1 Replies View RelatedWhat is the best workflow to create vehicle animation path for Civil View extension, when these path segments are not exported from Civil 3D, for example in intersections like in the picture of a simple case I attached. Do you create arcs in AutoCAD and then import them in scene, project them to road region surface and connect them to split corridor base lines, or you draw them directly in 3ds Max 2013?
View 6 Replies View RelatedI want an object to follow a spline path that is not planar.
I have to select the "follow" option in order to align the object to the path but I would like to maintain the object vertical.
I've got a Locator attached to a Curve with a Motion Path - the Motion Path is animated so the Locator moves nicely along the Curve. I now want to swap the original Curve with a new one and have the Locator follow it instead.
Is there a way to simply switch curves and tell the Motion Path to use a new Curve while keeping the animated keys in the Motion Path node?
I've tried playing around with the connection editor but cant manage to connect the new Curve to the Motion Path nodes "geometryPath"
I'm currently working on a advertisement for a client and I need to creat a kind of ribbon to wrap around like a present. I thought what would be best would be making the ribbon and then using a motion path add it on but also I would add a gravity field to the ribbon so to moved more like a ribbon.
Also with the motion path I have made them and connected my ribbon and for some reason it doesn't move until the last frame and just snaps to that position?
i'm trying to generate a path constraint for text to create a Pf source to highlight the perimeter of the text. i have fused the text vertices together to generate a continuous path. however, when constraining the Pf source to the path it only follows one letter. any assistance would be grateful
View 4 Replies View RelatedHow can i rotate an object between specific frames that has a path constraint? Here's a rough (mouse) sketch of what i'm attempting to do:
View 5 Replies View RelatedI am trying to move a free camera along a path... but the 'target' not moving with it.
Is that correct even tho it does not have a 'target'?
To get camera & target to move together, do I need to move them both individually?
3ds Max Design 2012
Is it possible to animate an image along a path? Or can you only track text on a path?
View 1 Replies View RelatedWhen I assign an object to a path using the default setting the object sits nicely on the first point of the cv curve in the path. And moves fine going in one direction but as it goes around a corner it is offset from the curve but continues along with this new offset until the end.
View 2 Replies View RelatedI have rigged a character and made it into a character set in which i have locked the scaling attribute , I have then saved this file. I have then referenced this file and and have done a walk cycle animation and saved this file. I have then realised that I needed the scaling attribute when I have added other parts of my scene. Is there a way to unlock the scaling attribute in my walk cycle animation file or will i have to go back and change it in the rigged file, create a new character set and do the walk cycle animation again?
View 2 Replies View RelatedIn the timeline panel in CS6 EXTENDED, you have a video feature, where you can animate three things:
Position Style Opacity
What I would like to know, is: How can I animate rotation of a layer? I want to rotate my layer at an angle and animate it. But when I rotate, the first animation frame is also rotated, resulting in NO animation between the frames.
How do I remove the blues eye lines and text when creating a animation preview?
[URL]
My current scene has 10 animation layers for a character, and seeing every f-curve from all layers, although grey and locked, when I only need to see the f-curves in layer I'm working on is really cluttering the graph editor. My current work around is selecting my active layer in the Layer Editor every time I select a rig control. Simple enough, but a pretty inefficient way of working. I can't seem to find a setting that allows me to just see ONLY the fcurves in the active layer. I imagine some of you out there may have hundreds of animations for a single game character.
View 4 Replies View RelatedI'm trying to animate a moving rope based on simulation data. I know how to import my motion data for individual objects.I've seen lots of tutorials where one uses simulations or soft bodies with IK in order to create a rope. how to use all these features and I want the rope to follow my coordinates exactly. I was hoping I could do something like the following:
1. create points in Maya which correspond to my data points
2. connect the points with a curve
3. loft a circle using the curve as a path in order to make a rope
4. move the points. due to History, the rope position is updated
Is there a way to do something like this in Maya? I've tried, and it looks like ep points do not have key-able channel data, so I can't create animations for them separately. I'm using .mov data file imports to generate x, y, and z motion keys for the points.
i need to do a loop animation of several stripes that starts at lets say 2units distance from each other, they separate slowly and by the end they have 15units separation, my problem is that each stripe is a separate object, so i offset their keyframes, but when i want to tweak the keys on curve editor they dont apply to the other copies. Any other way to do this simpler?
quick example on the image attached, real application on the video, video shows the animation(rendered sequential images of 1 loop then applied as texture) but with linear speed, so constant separation, i need to apply the above here, these dont only move on the X axis but on the Y aswell, while keeping the symmetry fixed on the center.
[URL] ....
I have a list of motion capture, those mocap didn't track the fingers so the hands are always opened. In some of these mocap I need the biped hand to be closed. I've been looking for a solution for about a day now. I think I'm in the good way which is to create a biped layer animation where the hands are closed and link the hands of that layer to the original layer. so I would be able to save that layer and apply it to every mocap animation that need to be readjusted. The only problem is that I'm not sure if it's the better way and I don't know the procedure.
View 2 Replies View RelatedI have an assignment for a class where part of the final project is detailing the construction of a mold for a part. The animation that I would like to do would show the build up of the part in a 3D printer layer by layer. The closest method of animating this that I can think of is unfortunately backwards.
As I would have the part and a camera facing up from the bottom of the part and would have a plane that would recede upwards in the y direction. This would reveal the part as the plane translates in the y direction.
This might be okay, but the problem is that I would like to show this from a camera on top facing down instead of a camera on bottom facing up. How I can create the look of a part being built up in this additive method?
To create an animation similar to the one shown in the page 225, in the tutorial, I created a curve but I am not too sure that was the correct way to create it.
1. Selected the Surfaces Menu.
2. In the font view, using the CV Curve Tool, created the first half.
3. Using Duplicate in the Edit Menu, I created the other half.
4. In the Edit Curves Menu, selected Attach Curves and connected two curves.
5. I, then selected the Animation Menu and created an object to be used as an aircraft and followed the same steps shown in the tutorial and it worked nicely.