3ds Max Animation :: Cloth Following A Path
Jan 25, 2013I have a woman with her arms spread and a cloth starts follow a defined path around her and her arms.
Is there any way to do that in max?
I have a woman with her arms spread and a cloth starts follow a defined path around her and her arms.
Is there any way to do that in max?
I'm trying to simulate metal deformation. To achieve a realistic metal denting I'm trying to use Cloth. The problem is though, whatever settings I try, my cloth-box collapses from itself. My question is; how can I set cloth up so that it can be as strong as metal, and only deform when I drop an object on it (that's where the denting comes in)?
View 7 Replies View RelatedI need to create an animation of a cloth banner attached to a wall. The bottom of the banner will be either held up, or rolled up. Then I want it to be released, revealing what is on the banner.
Are there any tutorials showing how to set up cloth using physX?
I'm trying to use the spline IK system to animate a linked 'train' on a path.
There are 4 segments which are joined with a universal coupling. I can only get one segment to actually follow the path, as the others don't follow at all. I've attached my example file.
How to stop an object from flipping along a Path Constraint. I have a pflow source traveling along a circle path. Half way along the path it flips shooting the particles the other direction.
View 4 Replies View RelatedSo I have been trying to use path deform but it alters the shape of my path...? I try to line up the pathdeformed object back up with the original path and it's barely close I can't figure out why it changes my path....
View 1 Replies View RelatedWhat is the best workflow to create vehicle animation path for Civil View extension, when these path segments are not exported from Civil 3D, for example in intersections like in the picture of a simple case I attached. Do you create arcs in AutoCAD and then import them in scene, project them to road region surface and connect them to split corridor base lines, or you draw them directly in 3ds Max 2013?
View 6 Replies View RelatedI want an object to follow a spline path that is not planar.
I have to select the "follow" option in order to align the object to the path but I would like to maintain the object vertical.
I've got a Locator attached to a Curve with a Motion Path - the Motion Path is animated so the Locator moves nicely along the Curve. I now want to swap the original Curve with a new one and have the Locator follow it instead.
Is there a way to simply switch curves and tell the Motion Path to use a new Curve while keeping the animated keys in the Motion Path node?
I've tried playing around with the connection editor but cant manage to connect the new Curve to the Motion Path nodes "geometryPath"
I'm currently working on a advertisement for a client and I need to creat a kind of ribbon to wrap around like a present. I thought what would be best would be making the ribbon and then using a motion path add it on but also I would add a gravity field to the ribbon so to moved more like a ribbon.
Also with the motion path I have made them and connected my ribbon and for some reason it doesn't move until the last frame and just snaps to that position?
i'm trying to generate a path constraint for text to create a Pf source to highlight the perimeter of the text. i have fused the text vertices together to generate a continuous path. however, when constraining the Pf source to the path it only follows one letter. any assistance would be grateful
View 4 Replies View RelatedHow can i rotate an object between specific frames that has a path constraint? Here's a rough (mouse) sketch of what i'm attempting to do:
View 5 Replies View RelatedI am trying to move a free camera along a path... but the 'target' not moving with it.
Is that correct even tho it does not have a 'target'?
To get camera & target to move together, do I need to move them both individually?
3ds Max Design 2012
Is it possible to animate an image along a path? Or can you only track text on a path?
View 1 Replies View RelatedWhen I assign an object to a path using the default setting the object sits nicely on the first point of the cv curve in the path. And moves fine going in one direction but as it goes around a corner it is offset from the curve but continues along with this new offset until the end.
View 2 Replies View RelatedTo create an animation similar to the one shown in the page 225, in the tutorial, I created a curve but I am not too sure that was the correct way to create it.
1. Selected the Surfaces Menu.
2. In the font view, using the CV Curve Tool, created the first half.
3. Using Duplicate in the Edit Menu, I created the other half.
4. In the Edit Curves Menu, selected Attach Curves and connected two curves.
5. I, then selected the Animation Menu and created an object to be used as an aircraft and followed the same steps shown in the tutorial and it worked nicely.
I am trying to attach an object to a motion path but when i do the object goes to the beginning of the path but when i move the time slider nothing happens and when i move the object it isn't attached to the path.
View 8 Replies View RelatedI have problem with animating camera along a spline using path constraint. The spline has been spline normalized before added to the path constraint. Then I add besier floating to be able to slow down the camera.
The final camera seems to move not smoothly. This can notice especially when the camera are further away from the origin (0,0).
Some says it's because of Max's coordinates is not fine enough which can clearly proved when import autocad file which located very far from the origin into max and most vertex will be shifted from where it should be in Autocad.
I'm new to Maya 2011 and simply put, I need to know the basics of animating a camera around a scene, along a path, slowing down and speeding up, how to move the point of interest, that type of thing.
View 1 Replies View RelatedI've created a motion path animation. In preview everything works well, I then go to create a AVI/WMV file and it builds the video without any problem. When you view the video it always stops in the same place (about 6 seconds in) but the video keeps running for the full duration of 30seconds.
I've tried this several times with different settings but always the same outcome.
I am trying to animate a car to follow a circular path thus performing a burnout.
The problem that I'm having is:
1) when I push the car along the "Y axis" it's good up until the very end of the bend (after the first quarter of the first circle), then it just stops. and when I use the green, blue, red gizmo to get it around the bend, it pretty much skips to the overlapping path so it doesn't actually drive along the path.
2) I can make the back tyres rotate faster than the front tyres, however I'd like to keyframe the tyre rotation so it looks like a proper acceleration and burnout. How do I achieve this? The tyres rotation parameters' are wired up to the percentage of the path constraint of the position of the car rig (which is linked up to follow the path). So if it's possible I'd like to pretty much keyframe in different amounts of rotation ratio with some biezer effect so that the tyres can look like it accelerates into the burnout and then as it comes out of the burnout it gains grip again and goes back to having the same rotation speed as the front tyres. (once I learn how to achieve this to the front tyres then I could essentially apply the same effect to the front ones to make the animation look more realistic.
a few things involving cameras. My assignment was to use our plane that we modeled with poly's and animate it on a motion path(used cv curve tool) and have a camera above it follow it. Now I got that down perfect.
But what I don't have a clue on, is how do I attach a camera on the same motion path as the plane and have a camera angle right behind the spinning propeller? Like a cockpit view.
Got a bit of a puzzle here, trying to animate a cylinder deforming along a path. Fairly standard stuff. Got the path deform fine, but now I need any of the vertices that enter this one area to be deleted. Volume select with a mesh object doesn't seem to work, as it will only select the vertices where the cylinder is before the path deform object. Is there any sort of work around/way to collapse the animation of the path deform? I know I could do snapshot if I only wanted one frame of it, but the cylinder moves along the path over 1500 frames.
View 3 Replies View RelatedI tried it by cycling U-value through graph editor, but not getting cycle.
View 3 Replies View RelatedI am doing some animations involving sine waves, and I can make an expression that controls the translation of an object such that it travels along the path of a sine wave, but I can't figure out how to dynamically create an editable sine wave curve.
Is there a way to have Maya generate a curve based upon the path that an object travels upon?
For instance I have a sphere that is moving along the X axis with time, and also moving up and down on the Z axis back and forth. I would like to make an editable curve object of this path of motion.
I can see in Maya 2012 we will have motion trails where we can see the actual path an object is moving along, and that we will be able to interact with this path to alter the animation, but what if we could take that path and make it an actual curve or NURBS object?
I have an animate file that contains many animations and one motion path animation. All animation elements of the animate file are responsive with the exception of the motion path animation which is not for some reason. Why does the motion path animation not repsonsive even though it is L, T, W, H coordinates are set as percentages?
View 4 Replies View RelatedI have a mocap cycle cleaned up and read to cycle, with and without translation, the cycle with translation is perfect because it avoids the sliding feet probelm.
Is there a way to give this cycle a path to follow so it can walk along this path and take curves and those things?
I'm looking around the net, but I don't seem to be able to find anything, the only thing i was able to think of is the path contraint, but, if i'm right, it won't respect the cycle translation, and i can use it without translation but it will be hard to avoid the sliding feet problem.
This is beyond CAD; but I figure it wouldn't hurt to ask. Can Inventor track a part in an animation and plot the resulting path? This cycloid is a good example (the red curve):
[URL]
Any way to evenly distribute Locators on a motion path along a nurbs circle? Its for a mouth/lips rig. and I need it to be symmetrical with out manually inputting values.
View 2 Replies View Relatedi have been using the drivenTime node to create walkcycles that follow motion path curves where the out time is connected to some attribute via a unitToTimeCOnversion node.in previous version of Maya.
When i try to connect anything to the Out Time of new drivenTime node the connection never works, not even keyframes?
is there a fix or workaround for this?
I am having an issue when trying to simulate cloth. When I simulate the cloth, the dialog box with the simulation comes up and before it finishes simulating one frame it closes. At the bottom of 3ds Max, it says end solve.
It worked on an earlier version of the same file as I was able to simulate 100 frames.
I am running 3ds Max 2010 on Windows Vista.
Below is a picture of my command panel. Why the simulation box only stays open for half a second?