Maya Animation :: Make A Character Walk In Path With Mocap Cycle?
Sep 16, 2013
I have a mocap cycle cleaned up and read to cycle, with and without translation, the cycle with translation is perfect because it avoids the sliding feet probelm.
Is there a way to give this cycle a path to follow so it can walk along this path and take curves and those things?
I'm looking around the net, but I don't seem to be able to find anything, the only thing i was able to think of is the path contraint, but, if i'm right, it won't respect the cycle translation, and i can use it without translation but it will be hard to avoid the sliding feet problem.
View 4 Replies
ADVERTISEMENT
Nov 14, 2013
I wanted to make a walk cycle animation, How to move a character up and down without affecting the feet position?
View 1 Replies
View Related
Feb 17, 2011
I have rigged a character and made it into a character set in which i have locked the scaling attribute , I have then saved this file. I have then referenced this file and and have done a walk cycle animation and saved this file. I have then realised that I needed the scaling attribute when I have added other parts of my scene. Is there a way to unlock the scaling attribute in my walk cycle animation file or will i have to go back and change it in the rigged file, create a new character set and do the walk cycle animation again?
View 2 Replies
View Related
Feb 1, 2012
I tried it by cycling U-value through graph editor, but not getting cycle.
View 3 Replies
View Related
Jul 19, 2011
i have been using the drivenTime node to create walkcycles that follow motion path curves where the out time is connected to some attribute via a unitToTimeCOnversion node.in previous version of Maya.
When i try to connect anything to the Out Time of new drivenTime node the connection never works, not even keyframes?
is there a fix or workaround for this?
View 1 Replies
View Related
Mar 23, 2011
Is there a way to create a walk cycle for your model and have it follow a path instead of animating each step? It seems like an incredible waste of time to sit and try to animate every single step the model takes. Also, I want the steps to be persistent. I don't want some to be larger and some to be smaller. I feel like there should be a better way of getting my character across the screen, I just don't know how to do it.
View 4 Replies
View Related
May 23, 2011
I am working on a school assignment where we are to use mocap for character animation...well av gone that far but, now I need to edit the animation to fit better in my animation......below is a playblast of what I have now..i need to have my characters holding onto the broom....
[URL].......
heres also a screenshot.
Using Maya 20121 and Motionbuilder 2012
View 3 Replies
View Related
Oct 9, 2011
I have a skeleton with baked motion capture keys on every frame. I'm wondering if there is a method to convert these baked keys to curves, so it will be possible to start cleaning up the animation. I'm fairly new to dealing with mocap. Perhaps there is a method for achieving this in Motion Builder rather than Maya, that I'm not aware of?
View 2 Replies
View Related
Aug 6, 2013
I am animating with mocap and biped in Max. A character that is walking, the mocap I have is a straight line. Is there a way in the mixer to have the characters walk curve without having a clip of a curved walk?
View 1 Replies
View Related
Jul 21, 2011
I am trying to map the mocap data to my character. In order to do that, i thought i just have to label the joints for each character and retarget. but in maya 2012 i cannot find the re targeting menu. I just found out that there is something called HumanIK, which i am guessing that it is very new.
Is there a way to use the mocap data in visor and map it to my character in maya 2012? without using HumanIK characterization Tool? also can i use mocap data(skeleton) in visor as HumanIk character ?or it is two different thing?
View 2 Replies
View Related
Feb 1, 2011
Aright i tempered with my character a bit, now as it walks the skin keeps moving along like in the old cartoons
View 1 Replies
View Related
Jan 1, 2012
I have setup everything for my charecter painted weights, so im now ready to animate but now i watched that my charecters eyes are not attached...im a newbie so i've struggling here....i like to combine the eyes to face..i dont animate eyes..
View 3 Replies
View Related
Apr 30, 2013
I know how to do a walk cycle, but how do I make my character turn right or left when he is standing still? I can animate him turning but then my character control is facing in the wrong direction. If I animate him turning and then rotate him opposite the control as I rotate the control in the correct direction it looks wobbly.
What is a common technique for having a character make a turn?
View 9 Replies
View Related
Sep 30, 2010
I have an animated character from which at a certain point i need an object to be 'detached' from the character and animated on its own, problem is as soon as i want to manipulate that part of the character i get this gray manipulator tool that tells me nothing will move, should i give up my whole dream upon this? Maybe i should have visibility turned and switch to a duplicate up to that point in the timeline, problem is i havent been able to move a duplicate either so far, back to hell.
View 2 Replies
View Related
Sep 4, 2011
I recently watch a movie with a couple of dinosaur characters fighting each other, and now I wonder: dealing with a lot of potential geometry interpenetration scenarios?
How do you deal with characters physically interacting with each other, as in two characters fighting, or hugging? Do you know if there is any nice tutorial covering that subject? I do not mean about clothing. That's a matter of dynamics and simulation.
regarding characters interacting with objects. Imagine a human character lifting a huge heavy barrel. The arms around that barrel should look like pressing against it. Or a person stepping up an extension ladder.
View 1 Replies
View Related
May 5, 2011
I am currently trying to bind the skin for a character using a rig created from a Digital Tutors Tutorial. The rig I've build seems to be working fine however when I created the smooth skin bind the thighs collapse when the leg is raised. I've tried fixing it using the interactive skin weight tool but it doesn't seem to make any difference. i have included pictures of a quick render as well as the weight influence of the knee and hip joints.
View 4 Replies
View Related
Nov 8, 2013
I'm currently rigging a character who is standing in a relaxed pose. Everything works fine until I get to the hands. The hands are also relaxed and a bit bent which makes it a bit hard to get the joints exactly where I want them. I have to jump between every viewport view to tweak the joints.. and it's rather tedious. I've read on several animation forums that people prefer to rig a character in relaxed position and that the T-pose is pretty much outdated. I watched a video from Naughty Dogs (the studio behind Uncharted game-series) and apparently they rig their characters in relaxed pose.
View 3 Replies
View Related
Jun 1, 2012
I'm having tons of trouble with the hair system for a character I've made. One that I'm very stumped on is for the rigging. I have a skull cap with hair on it and then the character separate. I have created a skeleton with which I want to smooth bind to the skin. While the smooth bind seems to be working, I'm having issues with the hair not following the global skeleton when I move it. The character herself moves, but her hair stays put and I don't know where to go from here to make her hair follow. I have tried combining the skull cap and character. I have tried grouping the skull cap and character. I have tried just about everything, but the hair will not follow. The most I could do was make the follicles and skull cap move, but not the hair. Any way to get the hair constraints to move along with the hair system after it has been binded, that would be great too as I have used hair constraints to form her hairstyle.
View 2 Replies
View Related
Sep 14, 2011
I have 2 identical files. same character, same rig, same character sets. One has animation. Can I just copy the curves of one character set and somehow put it into the character set of the other file?
View 1 Replies
View Related
Sep 2, 2010
I'm trying to animate a simple character's neck growing along a bendy curve. The head and shoulders need to be fixed at either end of the curve. It would be great if I could avoid ugly texture stretching too.
View 2 Replies
View Related
Sep 18, 2010
For certain and obvious reasons i need to delete history, problem is since i never deleted it, certain problems occur, like the very binding of my character to the skeleton is undoed, is there a way out of this mess, i just want the texture to stop moving when animation starts.
View 2 Replies
View Related
Apr 3, 2013
I am working on (yet another) minecraft character rig xD
So i have set up a facial control panel, using blend shapes and driven keys, but i need it to follow my character. If i parent it to the head, i doesn't follow when i grab the skeleton and move the character around, and if i bind it to the neck joint, i am not able to use the control panel, because the movement of the controls are locked, since they're binded to a joint.
[URL]
View 2 Replies
View Related
Jan 26, 2013
I am having issues with rigging a simple character in Maya 2013. I was able to set up the joints and the skeleton but when I move the joints to start animating, the model moves separatly from the skeleton. It seems to be moving in the same direction but exponentially more than the skeleton, creating separation between the model and the skeleton. I am new to rigging and was going off the tutorial and am stuck at this point.
View 2 Replies
View Related
Jun 17, 2013
I am trying to rig a HumanIK character so that both of his hands will stay attached to an object (gun, sword, bat, golf club, etc.). I can get the object parented to one of the hands and it follows along as expected, but cannot for the life of me figure out how to get the other hand to automatically stay attached to the object or follow it.
I've tried parent, point, orientation, etc., constraints using locators, the IK effector itself (wrist) and a few other things. It seems the HumanIK programming keeps a firm hold on the effectors and won't let anything other than the software drive them.
My HumanIK rig is properly setup and its definition locked. Using Maya 2013.
View 4 Replies
View Related
Dec 1, 2012
I've a character writing on something (it could be paper, wall, etc). Now I'm looking for a way that attaches brush to his hand for interactive writing on that object.
Don't say I have to sync it manually! it's a close up shot and motion captured movement. Indeed it's really complex movement! Imagine you are painting on a sphere with Maya's texture paint tool.
View 2 Replies
View Related
May 9, 2012
I am currently trying to make a symmetrical texture map for my character.
For example, I want the arms of a character to share the same texture pattern.
But I can't place the UV shell corresponding to one arm on top of the piece corresponding to the other arm because it doesn't match without flip.
If I'm trying to flip this shell it becomes shaded with a semi-transparent red color. But all UV shells must be shaded with blue and have a clockwise winding order. Am I right ?
Is there a way to reverse the winding order so the UVs match the original half's without physically flipping the UV shell on the U or V.
View 4 Replies
View Related
Dec 5, 2013
I am trying to animate a custom rig with a mocap file, I did some research and found that I could use "retargeting" for this, but couldn't find good info on how to do it. I also found that I could just add a biped and apply the .bip mocap file to it, then using constraints between my custom bones rig and the biped i could I could animate my rig. So i am trying to do that, it kinda works, but I have some problems with the arms, as shown on this image:
What I did is I used Orientation Constraints from my rig to the biped on all the bones, and a Position Constraint on the pelvis bone. As you can see the arms on my rig are behind the back on that frame of the animation, but in the biped the arms are in front of the body.
What could be causing this and how can I fix it? This is the .max file im using (2014 version - 2013 version - 2012 version - 2011 version)
View 1 Replies
View Related
Jan 9, 2013
I've got a Locator attached to a Curve with a Motion Path - the Motion Path is animated so the Locator moves nicely along the Curve. I now want to swap the original Curve with a new one and have the Locator follow it instead.
Is there a way to simply switch curves and tell the Motion Path to use a new Curve while keeping the animated keys in the Motion Path node?
I've tried playing around with the connection editor but cant manage to connect the new Curve to the Motion Path nodes "geometryPath"
View 9 Replies
View Related
Sep 9, 2013
I'm currently working on a advertisement for a client and I need to creat a kind of ribbon to wrap around like a present. I thought what would be best would be making the ribbon and then using a motion path add it on but also I would add a gravity field to the ribbon so to moved more like a ribbon.
Also with the motion path I have made them and connected my ribbon and for some reason it doesn't move until the last frame and just snaps to that position?
View 1 Replies
View Related
Dec 15, 2012
When I assign an object to a path using the default setting the object sits nicely on the first point of the cv curve in the path. And moves fine going in one direction but as it goes around a corner it is offset from the curve but continues along with this new offset until the end.
View 2 Replies
View Related
Jan 29, 2011
To create an animation similar to the one shown in the page 225, in the tutorial, I created a curve but I am not too sure that was the correct way to create it.
1. Selected the Surfaces Menu.
2. In the font view, using the CV Curve Tool, created the first half.
3. Using Duplicate in the Edit Menu, I created the other half.
4. In the Edit Curves Menu, selected Attach Curves and connected two curves.
5. I, then selected the Animation Menu and created an object to be used as an aircraft and followed the same steps shown in the tutorial and it worked nicely.
View 2 Replies
View Related
