I'm trying to animate a simple character's neck growing along a bendy curve. The head and shoulders need to be fixed at either end of the curve. It would be great if I could avoid ugly texture stretching too.
View 2 RepliesI am trying to map the mocap data to my character. In order to do that, i thought i just have to label the joints for each character and retarget. but in maya 2012 i cannot find the re targeting menu. I just found out that there is something called HumanIK, which i am guessing that it is very new.
Is there a way to use the mocap data in visor and map it to my character in maya 2012? without using HumanIK characterization Tool? also can i use mocap data(skeleton) in visor as HumanIk character ?or it is two different thing?
Aright i tempered with my character a bit, now as it walks the skin keeps moving along like in the old cartoons
View 1 Replies View RelatedI have setup everything for my charecter painted weights, so im now ready to animate but now i watched that my charecters eyes are not attached...im a newbie so i've struggling here....i like to combine the eyes to face..i dont animate eyes..
View 3 Replies View RelatedI know how to do a walk cycle, but how do I make my character turn right or left when he is standing still? I can animate him turning but then my character control is facing in the wrong direction. If I animate him turning and then rotate him opposite the control as I rotate the control in the correct direction it looks wobbly.
What is a common technique for having a character make a turn?
I have an animated character from which at a certain point i need an object to be 'detached' from the character and animated on its own, problem is as soon as i want to manipulate that part of the character i get this gray manipulator tool that tells me nothing will move, should i give up my whole dream upon this? Maybe i should have visibility turned and switch to a duplicate up to that point in the timeline, problem is i havent been able to move a duplicate either so far, back to hell.
View 2 Replies View RelatedI recently watch a movie with a couple of dinosaur characters fighting each other, and now I wonder: dealing with a lot of potential geometry interpenetration scenarios?
How do you deal with characters physically interacting with each other, as in two characters fighting, or hugging? Do you know if there is any nice tutorial covering that subject? I do not mean about clothing. That's a matter of dynamics and simulation.
regarding characters interacting with objects. Imagine a human character lifting a huge heavy barrel. The arms around that barrel should look like pressing against it. Or a person stepping up an extension ladder.
I am currently trying to bind the skin for a character using a rig created from a Digital Tutors Tutorial. The rig I've build seems to be working fine however when I created the smooth skin bind the thighs collapse when the leg is raised. I've tried fixing it using the interactive skin weight tool but it doesn't seem to make any difference. i have included pictures of a quick render as well as the weight influence of the knee and hip joints.
View 4 Replies View RelatedI'm currently rigging a character who is standing in a relaxed pose. Everything works fine until I get to the hands. The hands are also relaxed and a bit bent which makes it a bit hard to get the joints exactly where I want them. I have to jump between every viewport view to tweak the joints.. and it's rather tedious. I've read on several animation forums that people prefer to rig a character in relaxed position and that the T-pose is pretty much outdated. I watched a video from Naughty Dogs (the studio behind Uncharted game-series) and apparently they rig their characters in relaxed pose.
View 3 Replies View RelatedI'm having tons of trouble with the hair system for a character I've made. One that I'm very stumped on is for the rigging. I have a skull cap with hair on it and then the character separate. I have created a skeleton with which I want to smooth bind to the skin. While the smooth bind seems to be working, I'm having issues with the hair not following the global skeleton when I move it. The character herself moves, but her hair stays put and I don't know where to go from here to make her hair follow. I have tried combining the skull cap and character. I have tried grouping the skull cap and character. I have tried just about everything, but the hair will not follow. The most I could do was make the follicles and skull cap move, but not the hair. Any way to get the hair constraints to move along with the hair system after it has been binded, that would be great too as I have used hair constraints to form her hairstyle.
View 2 Replies View RelatedI have 2 identical files. same character, same rig, same character sets. One has animation. Can I just copy the curves of one character set and somehow put it into the character set of the other file?
View 1 Replies View RelatedFor certain and obvious reasons i need to delete history, problem is since i never deleted it, certain problems occur, like the very binding of my character to the skeleton is undoed, is there a way out of this mess, i just want the texture to stop moving when animation starts.
View 2 Replies View RelatedI am working on (yet another) minecraft character rig xD
So i have set up a facial control panel, using blend shapes and driven keys, but i need it to follow my character. If i parent it to the head, i doesn't follow when i grab the skeleton and move the character around, and if i bind it to the neck joint, i am not able to use the control panel, because the movement of the controls are locked, since they're binded to a joint.
[URL]
I have a mocap cycle cleaned up and read to cycle, with and without translation, the cycle with translation is perfect because it avoids the sliding feet probelm.
Is there a way to give this cycle a path to follow so it can walk along this path and take curves and those things?
I'm looking around the net, but I don't seem to be able to find anything, the only thing i was able to think of is the path contraint, but, if i'm right, it won't respect the cycle translation, and i can use it without translation but it will be hard to avoid the sliding feet problem.
I am having issues with rigging a simple character in Maya 2013. I was able to set up the joints and the skeleton but when I move the joints to start animating, the model moves separatly from the skeleton. It seems to be moving in the same direction but exponentially more than the skeleton, creating separation between the model and the skeleton. I am new to rigging and was going off the tutorial and am stuck at this point.
View 2 Replies View RelatedI am trying to rig a HumanIK character so that both of his hands will stay attached to an object (gun, sword, bat, golf club, etc.). I can get the object parented to one of the hands and it follows along as expected, but cannot for the life of me figure out how to get the other hand to automatically stay attached to the object or follow it.
I've tried parent, point, orientation, etc., constraints using locators, the IK effector itself (wrist) and a few other things. It seems the HumanIK programming keeps a firm hold on the effectors and won't let anything other than the software drive them.
My HumanIK rig is properly setup and its definition locked. Using Maya 2013.
I've a character writing on something (it could be paper, wall, etc). Now I'm looking for a way that attaches brush to his hand for interactive writing on that object.
Don't say I have to sync it manually! it's a close up shot and motion captured movement. Indeed it's really complex movement! Imagine you are painting on a sphere with Maya's texture paint tool.
I wanted to make a walk cycle animation, How to move a character up and down without affecting the feet position?
View 1 Replies View RelatedI've got a Locator attached to a Curve with a Motion Path - the Motion Path is animated so the Locator moves nicely along the Curve. I now want to swap the original Curve with a new one and have the Locator follow it instead.
Is there a way to simply switch curves and tell the Motion Path to use a new Curve while keeping the animated keys in the Motion Path node?
I've tried playing around with the connection editor but cant manage to connect the new Curve to the Motion Path nodes "geometryPath"
I am current animating a car along a path (a curve).
In order to have the front wheels turning left or right with the path, how can I get the angle of the curve at the u position I am at ?
I know in max its possible to bake out a spline using an animated objects keys. Is something similar possible in Maya?
View 2 Replies View RelatedHow can I make a curve's end points constrain to objects in order to create a "theta" angle line that changes dynamically when the angle between the two objects changes?
I thought they answer may have lay in creating the curve using Maya's new Bezier Curve tool, then using the Rivet plug-in from CreativeCrash to pin it to the middle of two poly cylinders (the "x" and "y" axis.) Unfortunately this doesn't work; the Script editor spits back "is not a vertex!". Either I'm not using Rivet correctly or the end points of a Bezier Curve in Maya are not the same as a CV Curve. But perhaps I'm going about this the wrong way entirely.. I ultimately would wish to extrude geometry about this curve to create a dynamically changing curved cylinder to visualize the angle. It seems like it should be a relatively simple thing to do...
My Animation Graph Editor is only showing one animation curve (for one attribute) at a time after I have set multiple keyframes for the character set and various attributes. I select multiple attributes, and hit View-Frame All, and it only shows the top attribute of the selected attributes as one curve.
View 2 Replies View RelatedI am doing some animations involving sine waves, and I can make an expression that controls the translation of an object such that it travels along the path of a sine wave, but I can't figure out how to dynamically create an editable sine wave curve.
Is there a way to have Maya generate a curve based upon the path that an object travels upon?
For instance I have a sphere that is moving along the X axis with time, and also moving up and down on the Z axis back and forth. I would like to make an editable curve object of this path of motion.
I can see in Maya 2012 we will have motion trails where we can see the actual path an object is moving along, and that we will be able to interact with this path to alter the animation, but what if we could take that path and make it an actual curve or NURBS object?
I have a problem when I am modeling my character or rather the character from the animation academy. I have created an NURBS sphere and I want to adjust it to the arm, so I go to the component mode add some isosparms and then it happens!!! I can´t move any vertexes... but in the object mode I can move the hole object.
View 1 Replies View RelatedI have the need to curve a region, then extrude it, is this possible?
The region is a flat view of a plasma cut plate with lots of holes/shapes that then gets rolled, doing it the way I describe would exactly re-produce in cad how the finished physical product comes out.
Coming from Sketch up to real big boy tools. I watched the tutorial videos and tried poking around a bit for this specific answer but came up a bit short.
What I'm trying to do is loft a face to a point. Easy enough. I've got my point established on an offset work plane, and I can just loft to that, however, I get nothing but straight lines. (First attachment)
An example of the ideal outcome in SketchUp is the second attachment.
I'm having the most difficulty trying to draw the curves along which I want the face to be lofted because, even as I sketch along my 2D plane, I can't snap the endpoints of my arcs to the endpoints of the face (or the point to which they'll all connect).
I keep getting this message. I know others have posted about it- but back int 2006 [URL]. The referenced link showing the solution is no longer available.
I read on an archived blog somewhere that is was a glitch in autocad2005. I am running 2010- so I don't get it. I really need to extrude these plines
I have a simple question about extruding. I want to extrude a simple plane and want to keep the bottom side of this plane open. In short I don't want a thickness effect. Maya keeps closing the bottom side of the plane and build a cube.
How can I do this in Maya,
I'm currently working on a model and there are a few faces that need extruding. Whenever I go to extrude them rather than just adding to the face it simply takes the face moves it back (or forward) and adds sides to it, so rather than being a solid extrude it's a concave area.
Intel Core i7 CPU 960 @ 3.20GHz
Windows 7 Ultimate 64 bit
ATI Radeon 5900 Series
3DS Max 2013
Maya 2013
I am converting over from Softimage (which I love, but is Windows only) to Maya for OSX. Is there an equivalent in Maya to the new thickness tool available in Softimage 2012 SAP? For instance, if one creates a sphere polygonal object in Maya and slices it, is there a way to give the shell a thickness (like creating a bowl) other than just extruding?
View 1 Replies View Related