I am trying to attach an object to a motion path but when i do the object goes to the beginning of the path but when i move the time slider nothing happens and when i move the object it isn't attached to the path.
View 8 Repliesa few things involving cameras. My assignment was to use our plane that we modeled with poly's and animate it on a motion path(used cv curve tool) and have a camera above it follow it. Now I got that down perfect.
But what I don't have a clue on, is how do I attach a camera on the same motion path as the plane and have a camera angle right behind the spinning propeller? Like a cockpit view.
I've got a Locator attached to a Curve with a Motion Path - the Motion Path is animated so the Locator moves nicely along the Curve. I now want to swap the original Curve with a new one and have the Locator follow it instead.
Is there a way to simply switch curves and tell the Motion Path to use a new Curve while keeping the animated keys in the Motion Path node?
I've tried playing around with the connection editor but cant manage to connect the new Curve to the Motion Path nodes "geometryPath"
I'm currently working on a advertisement for a client and I need to creat a kind of ribbon to wrap around like a present. I thought what would be best would be making the ribbon and then using a motion path add it on but also I would add a gravity field to the ribbon so to moved more like a ribbon.
Also with the motion path I have made them and connected my ribbon and for some reason it doesn't move until the last frame and just snaps to that position?
To create an animation similar to the one shown in the page 225, in the tutorial, I created a curve but I am not too sure that was the correct way to create it.
1. Selected the Surfaces Menu.
2. In the font view, using the CV Curve Tool, created the first half.
3. Using Duplicate in the Edit Menu, I created the other half.
4. In the Edit Curves Menu, selected Attach Curves and connected two curves.
5. I, then selected the Animation Menu and created an object to be used as an aircraft and followed the same steps shown in the tutorial and it worked nicely.
Any way to evenly distribute Locators on a motion path along a nurbs circle? Its for a mouth/lips rig. and I need it to be symmetrical with out manually inputting values.
View 2 Replies View Relatedi have been using the drivenTime node to create walkcycles that follow motion path curves where the out time is connected to some attribute via a unitToTimeCOnversion node.in previous version of Maya.
When i try to connect anything to the Out Time of new drivenTime node the connection never works, not even keyframes?
is there a fix or workaround for this?
I'm trying to model a cable. I do it with cylinder and EP Curve. I want to set an object motion and Object Flow Path.
I fallow also tutorial but still getting weird result.
My cylinder doesnt fallow the curve along. See attached img.
I set my motion object to normal...also the axis are set so the cylinder moves along curve on time slider good. But when I set Flow Path (latice) the object fallows the curve just with other end.
I've a character writing on something (it could be paper, wall, etc). Now I'm looking for a way that attaches brush to his hand for interactive writing on that object.
Don't say I have to sync it manually! it's a close up shot and motion captured movement. Indeed it's really complex movement! Imagine you are painting on a sphere with Maya's texture paint tool.
Once i set up a motion path for my object to follow, it sets the object to follow it over the entire timeline. what if i just want to object to start later on? I want it to raise up, hover over to the path, and then be attached to it.
View 2 Replies View RelatedWhen I assign an object to a path using the default setting the object sits nicely on the first point of the cv curve in the path. And moves fine going in one direction but as it goes around a corner it is offset from the curve but continues along with this new offset until the end.
View 2 Replies View RelatedI am doing some animations involving sine waves, and I can make an expression that controls the translation of an object such that it travels along the path of a sine wave, but I can't figure out how to dynamically create an editable sine wave curve.
Is there a way to have Maya generate a curve based upon the path that an object travels upon?
For instance I have a sphere that is moving along the X axis with time, and also moving up and down on the Z axis back and forth. I would like to make an editable curve object of this path of motion.
I can see in Maya 2012 we will have motion trails where we can see the actual path an object is moving along, and that we will be able to interact with this path to alter the animation, but what if we could take that path and make it an actual curve or NURBS object?
translate facial motion capturing data (basically 2d point clouds) to blendshape weights. I finished rigging my character and wanted to drive my blendshapes by the relative position of my tracking data, e.g. distance between corners of the mouth drive the "wide" blendshape and so on...
Hope YOU know a solution for this, I believe blendshapes are THE way to create realism in tracked animation but I was not able to find ANY reference to something like that. I'd like it to be customizable and not to expensive, so the imagemetrics faceware service won't do for me
Was wondering if there is a way of getting random camera movements? For example, i am doing a fly through of an earthquake scene and as the camera animates along the street it randomly shakes with the earthquake shocks.
I know I could animate it by hand but I wondered if there was a way (perhaps an expression) to make it more simple?
Is there a best practices for attaching props to HIK rigs in maya, like cups in hands, etc.?
I thought things were working well when I parented the prop to the hand control as everything looked fine in the viewport, but then I do the nice render and the prop floats around the hand.
I have two models that are identical other than the faces. However, when I apply a blendshape, in addition to morphing between the two faces, motion is created in the legs of the target. These are FBX files exported from MB 2011 into Maya 2011.
View 1 Replies View RelatedIf I create a facial GUI in maya , is there a way to add motion capture to that? What's the best way to do something like this?
View 1 Replies View RelatedThe basic premise is that I've built a grid of 100x100 tiles and aim constrained them to a locator. Now I'm wondering if I could somehow attach an "area of effect" to the locator so that only the closest tiles aim at the locator and the rest lay unchanged?
View 5 Replies View RelatedThere is no motion in my meshes when using set key or auto key.
So lets say I have a cube and set a keyframe at 1 and move it a little to the right and set a keyframe at 13, between 1 and 13 there's no motion from 1 to 13, just it jumping straight to 13. I hope that makes sense, I've tired going to Animate setkey options and checked current manipulator handle, didn't worked.
Trying to find the closest thing to 3dsmax trajectory, I'm using a motion trail. Once deleted the specific controller it was used for becomes very very slugish, with over 20 sec to respond.
I tried deleteing all the connections in hypershade and using the delete command but nothing works.
I've created a motion path animation. In preview everything works well, I then go to create a AVI/WMV file and it builds the video without any problem. When you view the video it always stops in the same place (about 6 seconds in) but the video keeps running for the full duration of 30seconds.
I've tried this several times with different settings but always the same outcome.
I have an animate file that contains many animations and one motion path animation. All animation elements of the animate file are responsive with the exception of the motion path animation which is not for some reason. Why does the motion path animation not repsonsive even though it is L, T, W, H coordinates are set as percentages?
View 4 Replies View RelatedI was wondering if there is a way in maya 2013 to import like 20 takes at the same time, work on those 20 takes in one maya file and export them simultaneously just like motion builder and his "export all takes, save one take per file, use take name".
I'm asking this because i am thinking of switching to maya, but this motion builder native feature is just essential to me.
I’m trying to attach my deform text to my gear and make it permanent. what I was trying to do was get the text to curve and the only option I see that makes it curve the way I want it look is deform path is there another I can it I will post picture what I’m trying do and did see any video YouTube how to curve text
View 0 Replies View RelatedIf I have "dummies" 1 - 3 positions animated, is there a controller I could add to the curved object to rotate and position it in respect to the dummies? I guess the dummies are acting like motion capture points.
View 2 Replies View RelatedI am tracking points on a moving object, it doesn’t deform, it tracks nice. Using Matchmover. Back in Max, it sees it as a static object, and the camera is moving around it.
Any way to invert the animation between a camera and an object so the other one is the one that moves, but they retain the same relational animation? Did that make sense? Right now the object (represented by a Group of 3D tracked points) is still but the camera moves, I want this opposite, the camera is still but the tracked points move, and it looks the same through the camera.
I'm new to Maya 2011 and simply put, I need to know the basics of animating a camera around a scene, along a path, slowing down and speeding up, how to move the point of interest, that type of thing.
View 1 Replies View RelatedI tried it by cycling U-value through graph editor, but not getting cycle.
View 3 Replies View RelatedI have a mocap cycle cleaned up and read to cycle, with and without translation, the cycle with translation is perfect because it avoids the sliding feet probelm.
Is there a way to give this cycle a path to follow so it can walk along this path and take curves and those things?
I'm looking around the net, but I don't seem to be able to find anything, the only thing i was able to think of is the path contraint, but, if i'm right, it won't respect the cycle translation, and i can use it without translation but it will be hard to avoid the sliding feet problem.
say objectA and objectB are both Parent constraining objectC. how would I remove the constraint of say, objectB? because in the outliner it only shows up as 1 constraint that has 2 W values.
View 2 Replies View RelatedIs it possible to make an object, say a NurbsSphere to always be on top of the geometry in the viewport, like x-ray on joints. That way, I could use a small sphere in say the Elbow as a controller, and it could be inside the mesh but not hidden. Much like what you see here:
[URL].......
Is that really not possible?