Once i set up a motion path for my object to follow, it sets the object to follow it over the entire timeline. what if i just want to object to start later on? I want it to raise up, hover over to the path, and then be attached to it.
View 2 Replies
i have been using the drivenTime node to create walkcycles that follow motion path curves where the out time is connected to some attribute via a unitToTimeCOnversion node.in previous version of Maya.
When i try to connect anything to the Out Time of new drivenTime node the connection never works, not even keyframes?
is there a fix or workaround for this?
I am trying to attach an object to a motion path but when i do the object goes to the beginning of the path but when i move the time slider nothing happens and when i move the object it isn't attached to the path.
View 8 Replies View Relatedtranslate facial motion capturing data (basically 2d point clouds) to blendshape weights. I finished rigging my character and wanted to drive my blendshapes by the relative position of my tracking data, e.g. distance between corners of the mouth drive the "wide" blendshape and so on...
Hope YOU know a solution for this, I believe blendshapes are THE way to create realism in tracked animation but I was not able to find ANY reference to something like that. I'd like it to be customizable and not to expensive, so the imagemetrics faceware service won't do for me
Was wondering if there is a way of getting random camera movements? For example, i am doing a fly through of an earthquake scene and as the camera animates along the street it randomly shakes with the earthquake shocks.
I know I could animate it by hand but I wondered if there was a way (perhaps an expression) to make it more simple?
I have two models that are identical other than the faces. However, when I apply a blendshape, in addition to morphing between the two faces, motion is created in the legs of the target. These are FBX files exported from MB 2011 into Maya 2011.
View 1 Replies View RelatedIf I create a facial GUI in maya , is there a way to add motion capture to that? What's the best way to do something like this?
View 1 Replies View RelatedI've got a Locator attached to a Curve with a Motion Path - the Motion Path is animated so the Locator moves nicely along the Curve. I now want to swap the original Curve with a new one and have the Locator follow it instead.
Is there a way to simply switch curves and tell the Motion Path to use a new Curve while keeping the animated keys in the Motion Path node?
I've tried playing around with the connection editor but cant manage to connect the new Curve to the Motion Path nodes "geometryPath"
I'm currently working on a advertisement for a client and I need to creat a kind of ribbon to wrap around like a present. I thought what would be best would be making the ribbon and then using a motion path add it on but also I would add a gravity field to the ribbon so to moved more like a ribbon.
Also with the motion path I have made them and connected my ribbon and for some reason it doesn't move until the last frame and just snaps to that position?
I have 2 identical files. same character, same rig, same character sets. One has animation. Can I just copy the curves of one character set and somehow put it into the character set of the other file?
View 1 Replies View RelatedTo create an animation similar to the one shown in the page 225, in the tutorial, I created a curve but I am not too sure that was the correct way to create it.
1. Selected the Surfaces Menu.
2. In the font view, using the CV Curve Tool, created the first half.
3. Using Duplicate in the Edit Menu, I created the other half.
4. In the Edit Curves Menu, selected Attach Curves and connected two curves.
5. I, then selected the Animation Menu and created an object to be used as an aircraft and followed the same steps shown in the tutorial and it worked nicely.
There is no motion in my meshes when using set key or auto key.
So lets say I have a cube and set a keyframe at 1 and move it a little to the right and set a keyframe at 13, between 1 and 13 there's no motion from 1 to 13, just it jumping straight to 13. I hope that makes sense, I've tired going to Animate setkey options and checked current manipulator handle, didn't worked.
Trying to find the closest thing to 3dsmax trajectory, I'm using a motion trail. Once deleted the specific controller it was used for becomes very very slugish, with over 20 sec to respond.
I tried deleteing all the connections in hypershade and using the delete command but nothing works.
a few things involving cameras. My assignment was to use our plane that we modeled with poly's and animate it on a motion path(used cv curve tool) and have a camera above it follow it. Now I got that down perfect.
But what I don't have a clue on, is how do I attach a camera on the same motion path as the plane and have a camera angle right behind the spinning propeller? Like a cockpit view.
I was wondering if there is a way in maya 2013 to import like 20 takes at the same time, work on those 20 takes in one maya file and export them simultaneously just like motion builder and his "export all takes, save one take per file, use take name".
I'm asking this because i am thinking of switching to maya, but this motion builder native feature is just essential to me.
How can I get an object to follow another object as well as reorient when the parent is deformed? See the attached image. Here I have wrist band rigged by using the "Path Deform Binding" modifier. I want the metal part to follow it as well as reorient to the flat surface it sits on. Here I had to manually rotate the metal part which is tedious if I want to try several band states.
View 4 Replies View RelatedI've been using Maya for two years. I have used the timeline on this version before, but now it is completely gone. Everything else is normal. Is there a place to reset everything? Where might I look to try and turn the timeline back on?
View 2 Replies View RelatedIf I have "dummies" 1 - 3 positions animated, is there a controller I could add to the curved object to rotate and position it in respect to the dummies? I guess the dummies are acting like motion capture points.
View 2 Replies View RelatedIs there any way to export the entire trax layer with multiple clips as an MA file? I need to swap out a character rig with a new one currently I am able to do this with single clips, but if i have a bunch of clips sequenced on the time line id like to do them all at once if possible?
View 1 Replies View RelatedAny way to evenly distribute Locators on a motion path along a nurbs circle? Its for a mouth/lips rig. and I need it to be symmetrical with out manually inputting values.
View 2 Replies View RelatedI don't remember how to copy keys on the timeline by dragging MMB.
I tried Shift + S, Ctrl + S and is not working. What is the keyboard shortcuts ?
I am tracking points on a moving object, it doesn’t deform, it tracks nice. Using Matchmover. Back in Max, it sees it as a static object, and the camera is moving around it.
Any way to invert the animation between a camera and an object so the other one is the one that moves, but they retain the same relational animation? Did that make sense? Right now the object (represented by a Group of 3D tracked points) is still but the camera moves, I want this opposite, the camera is still but the tracked points move, and it looks the same through the camera.
I'm trying to model a cable. I do it with cylinder and EP Curve. I want to set an object motion and Object Flow Path.
I fallow also tutorial but still getting weird result.
My cylinder doesnt fallow the curve along. See attached img.
I set my motion object to normal...also the axis are set so the cylinder moves along curve on time slider good. But when I set Flow Path (latice) the object fallows the curve just with other end.
there is a way to mark certain frames or certain regions of the maya timeline with labels.
Basically I want to be able to set a label at certain keyframes so that I can export this information for use in a third-party tool.
This is a pretty basic function in the Graph Editor.
All I want to do is copy some keyframes at one point to farther down the timeline IN the graph editor. Basically, select some keys, move to a new time and paste those same values. When I paste, all it does is add keys to the existing curve. I haven't used maya in awhile (2008 version), but I'm PRETTY sure this function was available. Why doesn't it work in 2011?
I've searched online, I've tried copying, moving to new time, create some keys, select them and then paste over them, but still doesn't work. And yeah, I know about the middle mouse button time slide trick, which is a workaround but doesn't work if you're copying multiple keys over time. I want to be able to do this BASIC function. What's the deal? On a Mac.
I am having some issues with sheetset. The pdf name is name of the drawing + name of layout.
1. The sheet sets do not follow the order of the drawings layouts
2. The list is not according to the drawings order in the directory
3. The sheets are automatically combined when I want them to be separate
4. There are numbers 1,2,3... automatically prefixed to the sheet causing additional trouble.
I was wondering if you could draw a motion path for objects to follow. I have multiple objects(12) that all need to follow on the same path. Do I have to animate all of them individually, or can I draw a path? These objects are NOT masks. They are text imported from Illustrator(CS6).
If Microsoft Powerpoint can do it, then surely Adobe can...
say objectA and objectB are both Parent constraining objectC. how would I remove the constraint of say, objectB? because in the outliner it only shows up as 1 constraint that has 2 W values.
View 2 Replies View RelatedIs it possible to make an object, say a NurbsSphere to always be on top of the geometry in the viewport, like x-ray on joints. That way, I could use a small sphere in say the Elbow as a controller, and it could be inside the mesh but not hidden. Much like what you see here:
[URL].......
Is that really not possible?
In the expression editor, is it possible to get the position of an object at a different time ?
For example, we are at time 100, and I would like to get a given object's position when we were at time 50. Is it possible?
i created a sphere that will control the rotation of the fingers. i align the sphere to the bone so it has the same angles. the bone angle is 0,0,0 but the sphere is (15, 10.23, 2)if i freeze the sphere, the angle get 0,0,0 but they get align with the world axis as X Y Z, how can i 0,0,0 and maintain the align rotation of the bone?
in Softimage there is something call set neutral pose, only change the angle displays to zero so the animator dont have a hard time.
