I want to make the A shape as if it was composed from the grouped hexagons from B. the hexagons from B are grouped and the shape from A was made from two elipses and function Minus Front prom pathfinder.
I've tried all the functions from pathfinder in all ways but some don't give a result(I don't need explanation for this) and some do not work as I wish.
Cs6 here.... I am trying to cut out a simple shape to allow the area under the shape to be trasnparent or Alpha. Like a Mask. Except when I use the Mask it does at it should do and mask the area where the shape is and MASKING or removing the areas not under the mask. I tried Compound path but I am not getting any result from it. My shape stays right on top of my work and does not "cut it out" to allow the Background to shine through as an alpha channel. See pics for clarity. I want to reverse this where the circle is cut out and the rest stays visible...
View 11 Replies View RelatedI want to cut a path in half. I've searched far and wide around the internet on how to do it but couldn't find any results.
View 3 Replies View RelatedI use Illustrator CS6, I used the pen tool to create an elipsoid "shape" by creating a path and giving it stroke and fill, I made a second one ot top of the first, now the second one covers the first at about mid level and I want to cut the top part of the first shape/path, that is showing, off.
I have tried with various methods but with strange results.
I'm New to illustrator. I would like these bricks to get small as they go to the right. When I reshape them it cuts the bricks instead of resizing. How to get this effect of the bricks getting smaller.
What I Have...
What keeps happening...
What I would like...
I need to divide a shape, say ellipse or similar, into 1 or 2 parts and then color the parts different colors and stroke the borders of each part. I don't want to cut the shape up, just keep it as a multi-colored object.I've tried scissors and similar tools but they cut and this is not what I want.
View 10 Replies View RelatedI'm on a Mac running Snow Leopard: Using either Illustrator CS5 or CC: when creating a shape with a stroke, using the variable line width tool (which I love!), saving the file. When I re-open the file the stroke has become a shape itself, with many points, and the fill has become a shape with no stroke!?
View 7 Replies View RelatedI would like to make some shapes follow a path orientation. I think it will be easy to understand my issue with an image:
View 4 Replies View RelatedI have created the outline of a snake using the pen tool. The shape is closed. I want to add scales that do not overlap and are snug against the outline wall. Im sure I am missing something incredibly simple. I tried to create anchor points along the outline and use the pen tool to connection the anchor points but doing so would delete the anchor points. Each scale will be different colors and shape and they need to all be snug together.
View 5 Replies View Relatedi'm making a map showing arid areas, dry areas, plain, mountains. i'm using the live paint bucket function with great difficulty. i'm using this for first tim, i have almost zero experience in illustrator . i'm stuck now. the greean area on the left can't be isolated out, or lets say cut paste as a new individual shape. I'm using illustrator cs5
[URL]
How can i outline a visual shape made of a group of elements (vector shapes) without outlining the individual elements or merging them togather. I would normally go by merging them togather but client requested they be unmerged.
View 4 Replies View RelatedI have this object (shape path) that is like a continous loop or ribbon. see below:
I would like to break it into two seperate shapes: a top half, and bottom half. I need to remove some between them though.
Unfortunately, I cannot make the scissor tool, knife tool or cut path tool work correctly. It just doesn't seem to work, no matter whether I have anchor points selected or not.
I have also tried duplicating the object and trying to delete anchor points until I'm left with one of the shapes. However, because of the ordering of anchor points, I end up with a blue line connecting one end of the object to the other.
Building new shapes using the Shape Builder tool?
View 1 Replies View RelatedI have some type converted to outlines, and it is in front/on top of a places raster pattern. when I select the type shapes and pattern and make a clipping mask, the pattern disappears and the letter shapes are filled with nothing!
Matters not whether the letter shapes are grouped or not...is there a way to have all of the letter shapes act as clipping mask together?
I am using Illustrator CS3 on a Mac 10.5.8.
I am trying to create a compound shape from a compound shape I have prepared.
The first part works okay. I can combine the hexagon-compound-shape I have created from multiple hexagon shapes.
I then want to cut away the edges on a part of the compound shape (using a box of 4 rectangles), which is supposed to give me a rectangle with only the lines from the compund-shape inside this rectangle (image 1).
But when I cut away the box around my hexagon-compound-shape (using the Pathfinder window), the hexagon-compound shape inside behaves strangely, with only some of the lines showing and other lines missing (image 2).
I would like the rectangles to simply just cut away the lines that the rectangles are covering, and leave behind the lines in my hexagon-compound-shape, as they appeared in image 1, and not having hexagon-compound-shape changing which lines appear and disappear.
Is there a way to make a kidney bean shape in illustrator? There must be an easier way then the way i'm trying to do it. can you not just create a hot dog shape and some how move a point in the middle to make it go kidney?
View 1 Replies View RelatedI have two shapes placed next to each other but the top section displays is a faint line to the left. How do I use the Path Eraser Tool to delete/remove that piece? Or is there a better way to remove?
Note:
Top image displays without path displayed...
Bottom section displays with path displayed...
I'm trying to blend 2 complex shapes together to give a 3D appearance but I keep having issues with the edges that choose to blend together. The image below shows what I want it to look like (small square on the left, smooth color blend) and what the shape looks like (shape on the right). The paths have the same number of anchor points and the white shape on top is an expanded offset version of the green shape on the bottom. The purple lines show what anchor points should be blending together.
For some reason it is blending to a location somewhere in the middle of the path and not to the corners. I have gone over the two paths and made sure that there are no points that shouldn't be there, as i know that can cause issues with blending.
I'm trying to create a star icon with lines through it. I used the star shape builder tool and then the line segment tool, but the lines are not being recognised as part of the star shape. For example, when I try to turn the star, the lines remain in the same place. This is pretty much exactly what I am trying to make, but I can't form the segments into one cohesive, editable shape.
View 11 Replies View RelatedI have to make an illustration with a 2D text that rolls on a 3D cilindric path. I don't know if is it possible on AI. Maybe I have to do this on a 3d software?
View 3 Replies View RelatedI have been playing around a bit - and think the answer lives somewhere in compound paths, but can't quite get it right.
In the example below, I essentially want the anter to cut out it's outline shape into the axe. Same with the shield over everything.
This is essentially so I can place the logo over all sorts of backgrounds, without having to have a white outline on it.
I'm doing an offset path command on a random shape and I need to repeat that in 4mm increments. I noticed that this command is far from accurate. To be as precise as possible I copy the base shape, paste it in front, apply the offset path command +4mm, +8mm etc (since the shape has round edges I chose round and a miter of 5000), and expand appearance. However, at 8mm expansion the round curves become pointy curves and therefore not mimicking the original shape.
AI CS6 latest
OS 10.7.5
Im trying to switch from Fireworks to Phosotshop. In FW you can draw two shapes and with both selected punch, unify, etc the two shapes. Could some one help me along on how to do the same thing in PS?
One more question. Is it possible to align a selected item to the stage rather than to another object? Fireworks can align objects center of the stage or left, right, top, etc.
I got this error many different times and the problem still continues.
When I change the stroke weight from the Strokes menu arrows or by scroll, this action changes my path's shape and distorts it. You can see the problem below:
I got similar errors when scaling a couple of times. But this one looks just impossible to me.
After using the path tool to create offset path and increasing the size of a letter. when creating an outline of that new letter the outline remains the same as the original. How do I create outlines to the shape of the new path not the original??
View 3 Replies View RelatedI was trying to make a logo and for doing as I sketched it I thought Offset path will do. But unfortunately it didnt. By using this feature repeatedly the shape is losing its initial form. This is what I want (as concept) but as you can see the shapes don't have the same form as the original cloud:
I know is almost impossible to make this without any distortion, but I was wondering if there is any other methond with less shape deformation.
I want to simplify part of a complex shape. Is it possible to isolate part of a shape path and simplify it, leaving the rest of the shape with the original number of anchor points?
View 8 Replies View Relatedi'm trying to build an easy way to create something like the following network graphic in Illustrator:
I basically want to create a brush or some other automatic method for adding a specific shape (in this case a circle) at every point a long a path. It would be nice if I could easily move around points on a path without have to move all of the circles independently.
I tried creating a pattern brush where the circles were the corner elements but depending on the angle of the corner the shape would get distorted.
How do I offset the path of a random shape (for example the outline of a guitar) without having it automatically inset the path as well? Is there an easier way to delete the segments of path I don't want than double clicking continuously with the white arrow?
View 10 Replies View RelatedWe bought a JaguarIV plotter for cutting clear bra, but I was thinking that we could also use it to cut vinyl graphics. I have been watching some tutorials about paths and I'm getting quite good at manipulating curves and such. But I don't know if I can output to the plotter from GIMP. I tried just sending it as a print job, which I've heard you can do from Corel and Illustrator, but it didn't work.
View 3 Replies View RelatedThis is something that has bugged me for ages. Sometimes i have real problems making a circular hole in another shape. I would normally use 'back minus front', but when i do this a lot of the time Corel adds the nodes into the shape but it doesn't actually cut out the area. Hopefully the graphics here will explain this better.
So i want to cut the three white circles from the blue background, but you can see the results:
The odd thing is this doesn't always happen. If i just draw a square and a circle, and cut one from the other, it works fine. Also, is there an easy way to 'punch' out the nodes that it has left in there to make the hole in the shape?