I'm on a Mac running Snow Leopard: Using either Illustrator CS5 or CC: when creating a shape with a stroke, using the variable line width tool (which I love!), saving the file. When I re-open the file the stroke has become a shape itself, with many points, and the fill has become a shape with no stroke!?
View 7 RepliesI have a logo where I'm having trouble erasing some overlapping shapes? I'm using Illustrator CS5.
This is part of the logo: [URL]. I need to erase the white part of the hexagon that's showing through the cog and circle shapes, and I need to erase the part of the green cog that's showing through the circle. The problem is that the cog and hexagon have been made using strokes, so every time I try and use the pathfinder tool the cog inverts itself and I get odd results like this: [URL].
I have created the outline of a snake using the pen tool. The shape is closed. I want to add scales that do not overlap and are snug against the outline wall. Im sure I am missing something incredibly simple. I tried to create anchor points along the outline and use the pen tool to connection the anchor points but doing so would delete the anchor points. Each scale will be different colors and shape and they need to all be snug together.
View 5 Replies View RelatedI want to make the A shape as if it was composed from the grouped hexagons from B. the hexagons from B are grouped and the shape from A was made from two elipses and function Minus Front prom pathfinder.
I've tried all the functions from pathfinder in all ways but some don't give a result(I don't need explanation for this) and some do not work as I wish.
I have this object (shape path) that is like a continous loop or ribbon. see below:
I would like to break it into two seperate shapes: a top half, and bottom half. I need to remove some between them though.
Unfortunately, I cannot make the scissor tool, knife tool or cut path tool work correctly. It just doesn't seem to work, no matter whether I have anchor points selected or not.
I have also tried duplicating the object and trying to delete anchor points until I'm left with one of the shapes. However, because of the ordering of anchor points, I end up with a blue line connecting one end of the object to the other.
Building new shapes using the Shape Builder tool?
View 1 Replies View RelatedIs there a way to make a kidney bean shape in illustrator? There must be an easier way then the way i'm trying to do it. can you not just create a hot dog shape and some how move a point in the middle to make it go kidney?
View 1 Replies View RelatedI'm trying to create a star icon with lines through it. I used the star shape builder tool and then the line segment tool, but the lines are not being recognised as part of the star shape. For example, when I try to turn the star, the lines remain in the same place. This is pretty much exactly what I am trying to make, but I can't form the segments into one cohesive, editable shape.
View 11 Replies View RelatedI'm laying-out a white-only T-Shirt logo (to go on a dark-green T-shirt)
For the sake of simplicity, let's say I have two ovals with no fill, just a white stroke. A small oval overlapping (on-top-of) part of the edge of a larger (underneath) oval.
how to 'hide' the line that's 'behind' the top object? [URL]
I would like to find a way to outline text, but not that the outlined path will be a filled path, but only a stroked path. I hope the image bellow is more clear than my explanation
View 3 Replies View RelatedI am trying to rotate the stroke on an end point of a line that I've drawn. Is there a way to do this while keeping the line in tact?
Before:
Desired Effect:
Notice the top point on this line. I've faked the rotation that I'm talking about. Is this possible to do without destroying the line, adding a white element above it to look like I cut if off, etc.?
I want to trim/cut away part of a stroked square...But it is not doing what I intend...
Please see my images:
What I am trying to achieve is that the the part (lat image) of the left square that you see slanted, should be cut away, so that the cut on the right be inline(45deg_) with the cut on the left...
I tried all the different cutting/trimming techniques but nothing does what I want..
I want to blend two similar paths. Both paths have dashed lines as strokes, and both dashed lines go from big to small dot, in decreasing direction. I want to blend both paths, so the blend goes from big to small, in BOTH directions. The ideal ending image would show the biggest dot at the top left corner, and the smallest, at the down right corner (the final project involves two spirals, but for the sake of simplicity, I attach two straight lines).
I try to blend them, and the blend only goes in one direction, as seen in the attached samples (in the sample, it goes from top to bottom, but it doesn't go from left to right). It seems that Illustrator takes only the first dot size, and applies it as if all the path has the same dot size.
I have a path that is stroked 2 pt black. The full path is there but the stroke is random along the path. I do not have a dashed line selected.
View 6 Replies View RelatedI cannot attain pixel perfect stroked rounded corners without a stray pixel being shown on one of the corners. I need pixel accuracy for UI I'm developing (i.e. for screen, not for print).Here's what I'm doing:
1) New document, Align New Objects To Pixel Grid. Document units are in pixels, and Preferences>Units all are set to pixels.
2) Create grey rectangle, something like 100x32
3) Set a 1px black stroke, outside
4) Apply Rounded Corners, 6px radius
5) Make sure you're in Pixel Preview Mode
6) Notice the one stray pixel in the bottom corner that is out of place at the edge of the round.
Here is a screenshot that shows my tests. Note if I use Center Stroke, it seems to work at first glance, but then applying other effects (e.g. 3 px inner glow) are incorrectly applied (due to pixel snapping of the centered stroke).
I am strating out designing in illustrator and how to created a stroked line, -----------, with each stroke ( - ) a different colour, like, each stroke having a different randomized color which differs from the next one. how to mask out parts of a template given to me by my school so i dont infringe that boundary when I add my lines to it.
View 11 Replies View RelatedThe Recolor Artwork dialog does not replace the color of objects filled or stroked with pure black, either CMYK or RGB. (Yes, with the Recolor Art checkbox selected.) The dialog will replace any other color, but not black. Not even a manually created rich black. Manually selecting another color from the Color or Swatches panel does change the object's fill or stroke.
This happens with both CS6 and CS5 under Windows 7 x64. I reported it as a bug on the prerelease site. Also not sure if bug reports are still being read for the released version.
I would like to use a vector object made in AI as a custom shape to be used as a cookie cutter in elements.. I imported the AI file in photoshop but the "define custom shape" entry under "edit" was grayed out.
View 2 Replies View RelatedI want to shape a banner i did into a curved rectangle, how would i do that without the edges of the image showing? I've tried it before but i had to erase the image part that overlapped the custom shape.
View 1 Replies View RelatedI designed a logo, that contains of several shapes and letterings on different layers. Now I'd like to export this logo as a vector based file, and I also want to create a stamp shape (or how is it called?) of it inside photoshop, so I can easily paint the logo with a single click and resize/transform it wherever I am.
How do I do that best? I guess I'll have to merge the different layers somehow, but how do I do that without rasterizing them?
I can't seem to figure out how to change a custom shape. Shape: 35px H x 700px W rectangle with vertical gradient. What I want to do: I am wanting to reshape the left 100 or so pixels so that the left side curls up and comes to a point approx 50px above. Best way to describe would be the shape would look like a candy cane laid on its side.
NOTE: I don't have a problem creating the shape. I have a problem with getting the gradient to follow through with the shape - the gradient wants to change according to the heigth of the curl. So far the only "attempted" way was using the liquify feature but I can never draw a good circular shape by hand.
Is there a way to add new shapes (sdf) to existing shape files? I have shape file with existing parcels and I need to add new parcels to it?
View 9 Replies View Relatedi can't figure out how to subtract the front shape from two already drawn shapes. I can draw a shape, choose "Subtract Front Shape" from the menu and then draw the second shape. But what if the two shapes are already there and i wanna subtract the front shape from the other.
View 7 Replies View RelatedIm created a shape and on the first shape I put a stroke and now every shape I do has a stroke even if I dont want one. I keep having to delete it and also something is weird as when I create a shape and then click another the one I just created disappears. It says its a vector mask and so its not a shape and but I click the mask it appears but clicking or creating another shape it dissappears.
Okay so played around and it seems every new shape took on the fill of the previous shape which was 0. How do I stop new shapes from not having 0 fill?
I'm trying to find the best way to fill a shape with other shapes( a with a specific size), without overlaping, like the example below.
My main concerns are the spacing between the circles, the positioning should be as paralel to the the outside shapes as possible, and the size of the circles ( or any other necessary shape).
I'm doing this by hand sometimes with 900 circles. is there a fast way to this? do you know any macro/plugin to make the task easier?
It might just be my coppy of Photoshop (7), but whenever I use the shape tool (round, rectangle etc) I always get a small fixed shape, and can't seem to draw the shape to the size I want. I can't do a free-transform after creating the shape, but I don't wanna do that as it alters the overall look.
Does anyone know what may be doing something wrong? Do I have to change a setting somewhere? Unlike the marquee tool, I m not able to select from a dropdown box for its constraints.
I am wanting to do some images prints but using text. I want to shape the text into the shapes of certain images eg waves, Christmas tress, castle, babies pram etc is this something i could do with elements?
View 1 Replies View RelatedOne of my students managed to make previews of the objects dissapear while drawing and editing.
Ex: Making a circle, only the radius line shows up, no preview of the circle itself.
I'm using CS3 on a Mac.
I outlined my text and subtracted it (and the tree image) from the black background. When I did this both appear thinner - particularly the tree.
If I then take the original version and the new subtracted version, and view them both overlayed one on top of the other in wire frame (outline) mode, there is no difference in the actual lines.
It seems to be a problem with the way illustrator previews the images. This wouldn't concern me, but when I export the file as a jpeg, the lines also appear thinner in the export.
I can create a manual solution by offsetting the path before subtracting, but this isn't ideal.
What does it mean when Illustrator v.15.1.0 ceases to contract a shape using offset paths and will only expand a shape? Seems like only yesterday I could render both ways. Wait a minute, it was only yesterday! Why would it suddenly stop funtioning?
View 3 Replies View RelatedI have two layers on the bottom I have text, and on the top I have a shape.
How do I make the shape transparent so the shape may be filled with the background color?