I am getting an error message while trying to use the Path/Join function in Ai CC6. While working on a new layer I try to Path/Join the vectorized image and the message states that "The selected objects cannot be joined as they are invalid objects." What am I doing wrong?
View 5 Replieswhich do you think is the best way to vectorized a black and white image? (not grayscale, just two colors).Because I've tryed a lot of different ways to do it but nothing gives me the results I want. I am sure there should be another way than manualy tracing it because its just black and white.I want to get the exact same look but vectorized, I uploaded a picture to show more exactly what I'm trying to do.
View 2 Replies View RelatedI have a cycling jersey I am designing. Now I would like to do the following, but I do not know how:
From This:
(I coloured the paths in PS - This is how they are separated)
to this:
HERE is my vector file
Illustrator CS6.
I did the fish body outline. Then I decided I needed to change the path by the head. I want to join the inside line to the body outline and eliminate the path on the head portion. I need the finished outline to e a closed path so I can do a clipping mask. I have tried the "join" cmd but it wants to add a straight line between the bottom and top.
Is there a way to accomplish what I am wanting to do?
Object - Path - Join dialog box asking if smooth or corner path is not showing up in CS5. How to get it bac/activate it?
View 5 Replies View RelatedWhen I expand a logo with very thin font in illustrator with Expand Stroke & Fill selected, the text which is now vectorized seems to have more weight compared to the original text.
How can I limit this difference?
The command to JOIN two overlapping anchor points as a SMOOTH join is not working (at least, on Mac).
"The join option only results in a corner join regardless of whether you select anchor points to join or the entire path. However, for overlapping anchor points, if you want the option to select a smooth or corner join, then use Ctrl+Shift+Alt+J (Windows) or Cmd+Shift+Option+J (Mac OS)."
I am a bit of a newbie to illustrator cs6. I have been using the image trace function so that I can edit my hand drawn pictures. I 'Place' the scan of my drawing and then go to Object>Image Trace>Make and Expand. The problem I have is when I want to join two lines together to close the shape (as below).
I have tried simply dragging the anchor points and reshaping the line so it appeared to be closed, I have tried closing it with the pen tool and I have tried to 'path>join' them but this box comes up.
I want to be able to fill my image traces with colour easily, can this be done?
I'm having a custom shape that I'd like to divide into 2 parts to mirror one of them and re-join the 2 parts.
View 2 Replies View RelatedI am creating a vector shape and I was wondering how to join points. Here is a sreenshot so that you understand my problem better: Or is this just not possible is photoshop and I have to use Adobe Illustrator ?
View 1 Replies View RelatedI am creating a vector shape and I was wondering how to join points.
Or is this just not possible is photoshop and I have to use Adobe Illustrator?
I'm trying to extrude a circle around a path in all dimensions, so I drew my path in lines, filleted the corners then tried to join using the PEDIT - Join command.
Firstly, the join says something like "2 segments added to 2 polylines" when really all I want is 1 polyline.
Second, when I try to insert my circle for extrusion I OSNAP to the end of the line, then when I specify the radius it draws in the wrong plane. So far the only way I have gotten around it is rotating the ucs. Is there an easy way to do this? my Dynamic UCS is on.
how the Photoshop DOM works with this snippet but I can't get it to select a pathItem correctly. When testing in ESTK I sometime have to run a line to that sets the path Item selected property to true several times before the path is selected in the GUI.Here is the script I am working on.
copyPathsToPhotoshop()
function copyPathsToPhotoshop(){
var currentLayer = app.activeDocument.activeLayer;
var count = currentLayer.pathItems.length;
var shapeNumber = 105
for( var p=1;p<count;p++){
[code]....
there's nothing in that dropdown menu for you to select your source image/layer in the Move Path plugin.I am using an XCF (Gimp) file, with many layers. I selected a particular layer, then I opened the Move Path plugin.
View 2 Replies View RelatedI know how to punch out a path out of a shape. Now I have an image. With the image the substract/minus option does not work like it works with a shape. What is the easiest way to do this? N.B.: the path is quite complicated, so redrawing it with the pen tool is the last thing I want to do.
View 2 Replies View RelatedWhen creating a work path on a new layer, the path is a grayish black color is there a way to create that path to be a different color, yellow for instance? Using CS6, I don't see it in preferences anywhere
View 7 Replies View RelatedI am trying to use Illustrator to create source files for a CNC cutting machine, it requires a single path or paths to be created and exported a as. DXF file.
The trouble I am having is that when I use image trace to create a path, I am getting multiple paths stacked. I have the image trace set to create fills.
All I do is place image, trace image with settings that give good results, expand trace, remove fill, apply stroke and save.
Is there a way to create one single path in illustrator, I am using the demo version with a view to buy but if this cannot be done then it's a non-starter.
I'm really new to Illustrator, and I'm trying to print an image that will have a CutContour swatch around it, with a bleed outside of the CutContour line. You'll see that I set up the bleed by creating an offset path outside of the CutContour path. However, I would like to delete the rest of the image outside of that, but I'm not sure how to do this. I don't want to print the entire block of the photograph, just the image inside the tracing, leaving the outside white. I thought I could select the offset path and make a Clipping Mask from that but it says it's "too complex" or doesn't do anything at all. I've attached an example since it will probably make more sense to have something to look at in addition to my explanation...
View 1 Replies View RelatedWhen I pull a regular 2-color photo from the web and use the tracing option, selecting ignore white, then expanding it into a path, it will not fill correctly. Instead of filling the object created, it fills the entire photo area of the original image. URL....
In the video, you'll notice that the fill option after expanding is marked with a "?".The goal here is to, after expanding, fill ONLY the image of the cursor.
Here I have a vector image. The pink stroke is a cut path that the software I use at work recognises and cuts. (Used for vinyl decals/stickers etc). All the lines highlighted in pink is useless to me, as it would cut out each individual line.
All I need is the outer edge of the entire graphic.
Note my crudely drawn red lines that border the image, that is exactly what I need. As you can see, the paths run through the image. BUT...When I try to erase the paths using add anchor point then cut path at selected anchor points so I can remove that particular segment, the colour essentially "leaks" as it isn't a closed area anymore. Rasterizing the image destroys the quality and I would like to be able to perform this task without loss of quality.
Is there a way with JavaScript to place an image with a calculated path and file name? I have 30+ artboards per document, each artboard named by product number. The actual file name of the master AI file is also already established (meaning every document I use this new script on will have already been saved).
Here's the scenario I'm hoping to create in the context of the documents mentioned above:
Run a script to "Place" a linked image based on the following calculated path:
["S:SAPCurrent Images in SAPStock Schools"] + [current ai filename minus the .ai extension]+[a hyphen like this "-"]+[currently selected artboard name]+[".jpg"]
This image link can be placed on a new top layer called "Images" or if necessary on the currently selected layer. Dimensions of the placed image should be a pre-determined size 8"x8".
Error if the ai document has not been saved yet.
Drawing: line, arc, line.
arc was defined with line's end points and radius, so I'm positive that this drawing is continuous.
Steps I take:
pedit
click
do you wish to turn into polyline
y
j
Select objects: 1 found
Select objects: 1 found, 2 total [enter]
Select objects:
0 segments added to polyline
[enter]
I had no problem turning other arcs into polyline...
I am using PaintShop Pro X5 & PaintShop Photo Pro X3
I have an image which was originally made up of two other images side by side. They are both of similar colours and content but the dividing line between them is quite obvious. I don't have the original PSP files in order to use the selection and layer method of feathering them, so what would be the best way to get the pixels to blend across the join? I thought there was a tool in PSP to do this but can't find anything.
I need to find out how to change a jpg file into a clean vector file that can be used in my laser cutter.
View 1 Replies View RelatedI'm trying to join two images. Both of them are .svg files, but whenever I press Ctrl-J it gives me a error: The selected objects cannot be joined as they are invalid objects(Compound paths, closed paths, text objects, graphs, Live Paint group) You can use the Join command to connect two or more paths, paths in groups;or to close an open paths.
(By the way, I'm using Illustrator cs6 on a trial version)
I'm trying to join two paths with the pen tool. The shape is a coffe mug, took me half an hour to try to combine paths with the pen tool.
I'm trying to join where the little white gap is. I had the same issue opposite but I managed to draw a little curve in there and join the paths. But I can't seem to do it the other side and I don't understand how it works.
Im trying to get the join dialogue to open so I can set to smooth but when I click comm j or shift option comm j it doesn't open. I closed and reopened holding shift control option comm but still doesnt show. How do i get it?
CS6
I'm trying to do a poster with a sort of graffiti writings on a wall but I can't reach for any kind of realism. I'd like to see the writing on the wall like it was actually written.I'm using a real photo behind the writings but the image and the text don't connect together, it is simply like a copy-past work. the effect I'd like to reach is like if the writings were printed on the wall but the wall is a photo so I don't know if they can be joined together..
View 5 Replies View RelatedI have the following shape:
Which is an ellipse which I happened to draw a line inside of. My goal is to be able to join the line with the ellipse so I can make it part of the shape, then I'd like to chop off the top of the ellipse (the part on top of the line).
[Illustrator CS5]
I need to copy and paste path segments in order to create uniform serifs for letters. (For example, specific path curves).
So imagine I have a horizontal segment and a curve segment. I mouseover each one seperately and I can see they have anchor points where I want them to merge afterwards. I drag one towards the other to make them intersect. Then I try to select both anchor points and press CTRL + SHIFT + ALT + J, but it displays this error: "To join, you must select two open endpoints. (...)" Which makes me think I'm not really selecting both anchor points when they're overlapped.
I have the idea that they can't overlap, because my path segment won't detect the anchor point in the other path. They're just visually intersected but not connected.
If I try to join them when they aren't overlapped, they will join but distort the original shape of the path segments. I select them both with the Direct Selection tool, pressing Shift to add the second anchor point to the selection, which won't work when they're overlapped because Shift + Clicking will deselect the anchor that seems on top.
I also tried various shape modes in pathfinder and nothing works.
How can I properly overlap and join / merge them?
(I'm using a white fill so I can see the shape forming as I add more anchor points so I'm sure they aren't joined).
kept getting the following error when I try to join two end points.
To join, you must select two open endpoints. If they are not on the same path, they cannot be on text paths nor inside graphs, and if both of them are grouped, they must be in the same group.
Here's what I have. Both paths are in the same group. I zoom to max and both ends are on top of each other. So, why am I kept getting this error message when trying to join them? I tried to Average and there is no error but yet the path is not closed.