I made this technical detail. To make an arc I use ''tan, tan, radius'' command. It looks like arc and circle is joined together, but if I move closer as you can see they aren't joined together. So how can I join them? I tried 'join' command but it won't work for me or maybe I don't know how correctly use this commad.
View 8 Replies
I'm trying to extrude a circle around a path in all dimensions, so I drew my path in lines, filleted the corners then tried to join using the PEDIT - Join command.
Firstly, the join says something like "2 segments added to 2 polylines" when really all I want is 1 polyline.
Second, when I try to insert my circle for extrusion I OSNAP to the end of the line, then when I specify the radius it draws in the wrong plane. So far the only way I have gotten around it is rotating the ucs. Is there an easy way to do this? my Dynamic UCS is on.
I'm trying to recreate a logo and I want to join a line and circle, so that the outer circle is merged with the top line, as in the figure below. All the pathfinder tools don't give me what I'm after, I know there's got to be a simple way to do this, how can I accomplish this?
View 5 Replies View RelatedDrawing: line, arc, line.
arc was defined with line's end points and radius, so I'm positive that this drawing is continuous.
Steps I take:
pedit
click
do you wish to turn into polyline
y
j
Select objects: 1 found
Select objects: 1 found, 2 total [enter]
Select objects:
0 segments added to polyline
[enter]
I had no problem turning other arcs into polyline...
The command to JOIN two overlapping anchor points as a SMOOTH join is not working (at least, on Mac).
"The join option only results in a corner join regardless of whether you select anchor points to join or the entire path. However, for overlapping anchor points, if you want the option to select a smooth or corner join, then use Ctrl+Shift+Alt+J (Windows) or Cmd+Shift+Option+J (Mac OS)."
I need to find the center of a circle that is tangent to another circle and a point on a line. I cannot use tangent tangent radius.
View 4 Replies View RelatedI was wondering the best way to draw a circle that passes through an endpoint of a line and then is tangent to another circle above it? I need to create a radius of 3.5 between the two points.
View 9 Replies View RelatedI have made this planet and I want its ring to look as it's spinning around it, So the upper of the ring should go behind the actual planet! How can I do that? Also how can I add some volume to the ring to make it look a bit more realistic?
View 5 Replies View RelatedJust can´t find out how to join these 4 polylines:
Bank.dwg
I created many lines, and joined them together nicely..Now I have a closed complete 2D shape...I want to extrude the shape, but...
I think I need to join all the lines to become a single line first...I can't find this command... How can I unite all the lines together
I have 2 SHP files, one with lot information, the other with OCP. I created a join between the two tables but the resulting data was not spatially related. The objective is to show the land use of each lot.
View 6 Replies View RelatedHow to join atributes from xls/xlsx to table in shp file?
I attache some sample files.
I have shp with 3 poligones. Each has two atributes in the table. I prepared some table in excel. Now I want to join this file to shp's table.
Should I connect this file though FDO? (ODBC)
A new problem; I can't join these plines. I have tried just 2, selecting them before entering the command but nothing happens. I need the selected line joined with the one on each end that shares that node.
View 9 Replies View RelatedIs there a way to join projects? I have different projects for a few different parts that I would like to make an assembly from.
View 1 Replies View RelatedJOIN command has the option selection and merging several objects at once, but I can not join more then one line.
View 7 Replies View Related3 lines. 2 arcs. All coplanar, all meet end-to-end.
I set "Units/precision" to 0.00000000 and inspected them. They are all x=0 for each endpoint, therefore coplanar. I also did a point "ID" command and checked each endpoint approaching from both sides and confirmed that each pair of results was identical, so all the ends meet exactly.
I was under the impression that Join or at least PEDIT should be able to combine coplanar lines/arcs that all meet end to end into a polyline. Also, using the Express Tool's "FLATTEN" command doesn't work.
The reason I'm doing this is because I've drawn lines/arcs that trace along the midpoint of a sheet metal's material thickness, and this sheet metal has two bends in it and isn't flat anymore, so converting the lines/arcs to a single polyline will tell me how long the flat plate needs to be that will be ordered to create it.
How to join 2 alignments which are continuing a same road? Is it even possible ?
I have tried to explode them into polylines > join the polylines and then reconstruct the alignment again but it crashes on everything longer than 15 miles
I'm using AutoCAD 2011. Lately I'm having lots of trouble getting LWPOLYLINES to join, end-to-end. They were all created with the same UCS on elevation zero. Some are arcs, and some are straight segments. I've used PEDIT, MPEDIT, JOIN. Nothing works. They are definitely end-to-end.
View 9 Replies View RelatedI am trying to assembled these 2 parts but the elbow gives no options..how can i constrain the elbow to the straight pipe?
View 7 Replies View RelatedI need to join multiple lines to a new polyline..The lines are filtered by a selectionset
Dim oPline as new Polyline()
For Each oSel As SelectedObject In acSSet
Dim oEnt As Entity = TryCast(acTrans.GetObject(oSel.ObjectId, OpenMode.ForRead, True), Entity)
oPline.JoinEntity(oEnt)
End If
Next
The error occurs on the oPline.JoinEntity(oEnt)
Is it possible to create jon between point feature and polygon feature which is not attribute based, but only geometry based.When point is inside polygon can I create automatic join between point and polygon so I can use joined attribute data table.
I know i can create "object data records" links between enclosed text and polyline but i want to do same thing using SDF format points and polygons. Can it be done without converting point feature label to text and polygon to polyline and then creating automatic links and then again converting polylines with object data to SDF format.
In sketch mode, there is a function to split lines, but I don't see one to join lines.
(I'm talking about colinear lines with the ends touching - I want to convert two lines into one).
It may seem trivial, but I'd like to use these lines in frame generator to select by a single line and not by endpoints of two different lines. Less clicks and more consistency in my model.
I am joining plines on the same layer, etc. I was taught to use PEDIT-Join but noticed that I can do the same function with just the JOIN command. Is there any difference? Is one better/safer to use?
View 7 Replies View RelatedI am trying to join line in different plan. but i cant join many line in this option. any other method. thats line used for sweep.
View 1 Replies View Relatedwhy I cannot join the various polylines in the attached example? My objective is to create 2 closed polylines, Line 1 and Line 2.
View 1 Replies View RelatedI'm trying to join a helix onto a 90 degree bend but I can't get the 2 ends to marry up.
I am self taught so I don't know all the commands but I understand the concept from using Maya / 3Ds Max in the past.
Also why do I see the diagonal lines at the end of the 90 degree?
Ihelix.jpg
Need macro to merge and join all overlapped lines after flattening so I end up with a basic flat 2D outline.
View 1 Replies View RelatedI have two different assemblies, one has a normal batter slope to a table drain or embankment and the other is a kerb and channel. Refer attached.
When you apply these two assemblies in a joining regions, I get both assemblies at the same point, which causes the corridor surfaces to incorrectly triangulate.
How can i join these 2 pieces of crown moldings? I've created them in polyline and then extruded them.
View 5 Replies View RelatedSo the problem I am having is when I try join lines and/or make a polyline. I am trying to model an electron lens and have all the measurement and angles correct but Autocad does not want to allow me to join the lines so that I can make a 3D model for export. When it does allow me to join all the line or make a polyline, the lines are not straight. Granted I have to zoom in to see the deviation in the line but my connecting lines are not orthogonal like they should be. Here is a picture of what I am trying to make.
The main problem area is the gray part three electrode 1.2.pdf (Don't know if you can see my attachment)
three electrode 1.2.dwg
With Add SHP connection, I added The SHP and created a JOIN with an ODBC connection access database table on a Common Column.
Is it possible that I can save it in that format itself so that I can use it later, i.e. the SHP file will have the additional columns after the JOIN.
