A new problem; I can't join these plines. I have tried just 2, selecting them before entering the command but nothing happens. I need the selected line joined with the one on each end that shares that node.
View 9 RepliesThe Plines that I am using on my drawing do not appear solid when I change to the required global width, all my system variable are set correctly however the lines are showing 'doubled'. How do I rectify this?
AutoCAD 2013 Mechanical SP2
64-bit HP Z400, Intel Xeon W3550 3.07GHz
12.0GB RAM, ATI FirePro V4800 (FireGL)
Windows 7 HP Z400, Intel Xeon W3550 3.07GHz
12.0GB RAM, ATI FirePro V4800 (FireGL)
I have several rectangles in a drawing which have the same dimensions, is it possible to perform a multi select of these items by specifying the lenghts of the rectangles ? I can't see a way of doing this under QSelect or Filter.
Autodesk Inventor Professional 2013 SP2 64-Bit Edition
Windows 7 HP Z400, Intel Xeon W3550 3.07GHz
12.0GB RAM, ATI FirePro V4800 (FireGL)
How do I solve this problem I cannot join basic lines to make a closed polyline as they will not join together. So i tried to use the flatten command which does not work and out puts error below:-
Command Prompt Input/ouput
Command: FLATTEN
Select objects to convert to 2d...8 found
Remove hidden lines? <No>:
A vertex was added to a 2D pline (0) which had only one vertex.
A vertex was added to a 2D pline (0) which had only one vertex.
A vertex was added to a 2D pline (0) which had only one vertex.
A vertex was added to a 2D pline (0) which had only one vertex.
A vertex was added to a 2D pline (0) which had only one vertex.
A vertex was added to a 2D pline (0) which had only one vertex.
A vertex was added to a 2D pline (0) which had only one vertex.
Drawing: line, arc, line.
arc was defined with line's end points and radius, so I'm positive that this drawing is continuous.
Steps I take:
pedit
click
do you wish to turn into polyline
y
j
Select objects: 1 found
Select objects: 1 found, 2 total [enter]
Select objects:
0 segments added to polyline
[enter]
I had no problem turning other arcs into polyline...
what is the difference btwn using the join icon and joining lines using the pedit command?
View 5 Replies View RelatedThe command to JOIN two overlapping anchor points as a SMOOTH join is not working (at least, on Mac).
"The join option only results in a corner join regardless of whether you select anchor points to join or the entire path. However, for overlapping anchor points, if you want the option to select a smooth or corner join, then use Ctrl+Shift+Alt+J (Windows) or Cmd+Shift+Option+J (Mac OS)."
I have these plines that keep appearing in my drawing that are not on a layer (see attached). I have never experienced this before. There are 10x duplicates stacked upon one another surrounding three separate shapes. My theory is that a hatch is creating them. I deleted them and they came back. How do I manage them and their display properties, or better yet, remove them from the drawing.
-----
AutoCAD LT 2011
AutoCAD Civil 3D 2012
I have a 3d topographic survey plan. I need to take sections at various locations and would like to know the best way of going about this.
I am used to working with solids and so would normally just take a section plane but this won't work as the 3d topographic survey plan I have is made up of polylines.
How i'm adding lengths of individual plines...I am running MEP 2013 and lately we've been doing a lot of measuring of plines...The problem i'm having is that we are supposed to add 24' to every length...So if I measure a polyline and it's 10' long, the number i'm supposed to be putting on the drawing would be 34'...Is there a way to create a command that will automatically add what I need to every pline?
View 9 Replies View Relatedim after to join two lines into one line. ive got a rad of 10mm then a straight line.
dxf as shown, im using Lt
So, I am trying to output a solid 3D model of the attached drawing. I traced it and converted it into a dxf, from there I cleaned it up, but cannot pedit. I assume it has to do with the arcs. Cannot find anything on google, so I thought I would turn to you good folks.
[URL]
I have got a recordset that contains a bunch of ehandles for closed plines. Currently I cycle through the recordset, change each ehandle to an oblject and hatch it. It works fine, but is a tad slow. I would like to put all of the ehandles into a selectiion set (maybe?) and hatch them all at one time.
View 4 Replies View RelatedI searched and saw lots of posts on converting a spline object into a pline, but not the other way around. I like the way that splines can use control vertices or fit points.
I know that you can apply a spline smoothing to a pline, but what I'd like to do is to convert a pline object into a spline object and splining a pline does not do that.
Any fairly easy way to do this? Are there LISP routines that do this?
I am attempting to fillet plines to make rounded curbs at street intersections. Whenever I create the fillet, the 2 plines that were filleted remain as they were before the fillet.
This only happens on my computer and only in AutoCAD 2011, it works fine in Civil3D 2011. We only have a limited number of Civil3D licenses or I would just use that all the time.
The attached screenshot shows an example of what happens. The 2 red lines are what were filletted (the fillet is in white). Both lines are long enough to accomodate the radius of the fillet.
What is causing this problem?
Is there a way to generate a roof based from plines? Like this but without tracing? I need to generate multiple roofs at once with the same slope ect.
View 9 Replies View RelatedIs there a way to generate a roof based from plines? Like this but without tracing? I need to generate multiple roofs at once with the same slope ect.
View 9 Replies View RelatedI've been trying to figure out how to do this. I have a file with 41 drawings, and 7650 objects. and i want all the lines, arcs and circles to be turned into polylines. Now the Mpedit command doesnt really do it for me.
Command: MPEdit
Select objects: Specify opposite corner: 4632 found, 10 groups
Select objects:
divide by zero
This is what happens when i write MPEdit, mark everything in my drawing and press enter. Now i also tried marking a line, using select similar, and fixing it that way. but i get the "divide by zero" error aswell.
I know there are different ways to do this. Would like to know multiple options so I can see which might be quickest for me.
I have points with elevations and 2D plines at elevation zero drawn between them.
I would like 3D plines instead. This is the easiest way for me to transfer them to another drawing where I will make surfaces with them. I don't want to have to transfer the points over.
I can redraw the plines as 3D plines but this is time consuming and seems unecessary.
I don't want to have to convert them to Feature Lines either. I prefer they be 3D polylines.
Is there a simple command for this? I already have a surface containing the points and lines as surface breaklines.
Is there a project objects to surface command that will make these 2D plines at elev 0 into 3D plines while assigning elevations (and vertices) only at the current vertices?
What about a simple series of commands to convert the 2D plines to 3D plines, then force the 3D pline to take on the elevations of the points at its vertices? (I think this would be my preference, but don't know any of these commands or where to find them.)
I am working on a script. I need to select all lines and polylines and set there linetype scale to 1.
I'd take a simple lisp routine if that would be easier.
Didn't their use to be a control for how PLines showed up at intersections when you increased the width? I can't remember where it was (dialog box, options, sys-var)?
View 5 Replies View RelatedI have to create some plines in a drawing from the inputs provided by the client. I prepared a lisp code for it. I have to use it to 1000 drawings. Every time I open the drawing and running the lisp command.
Is any lisp code to run in bulk open drawings with out entering command prompt.
I'm looking for something that, after selecting several plines (overlaped or not), I can insert/remove vertexes.
View 9 Replies View RelatedYesterday I post the message "Exporting pline and text" which turned out to work realy well.
However I need something else...
I need to select several plines and export their vertexes (as it is already done) BUT I also need to select SEVERAL texts and export them as well as their insertion point coordinates.
I tried with the code below but without any success... It gives the error "; error: ActiveX Server returned the error: unknown name: "TEXT"" This happens after selecting some texts and hiting enter.
Here is the
(defun c:zi5 ( / f i o s ss obj objdata texto texto_f nomebase nome_zi tx1 iPt)(vl-load-com)(setq nomebase (getstring "
Enter name for file:"))
(setq nome_zi (strcat "D:" nomebase "_zi.txt"))
(princ "Select your plines...")
(if (and (setq s (ssget '((0 . "LWPOLYLINE")))) (setq f (open nome_zi "w")) )
[Code]...
Of course with ACAD MAP (FDO Labels for example) or better with ACAD CIVIL : no problem !
But often I have to use a Standard AutoCAD ...
A lots of people have already asked for this routine :
But I search in this forums and some others and unfortunately I can't find any correct routine Full operational on ACAD 201X 32/64 bits
I have many 2D Plines with an Elevation : some Normal , some have been splined --> 1st problem
I would like to label them with :
- either a Block with ONE attribut : the elevation
- either a MText with a blank Mask behind
As you wish ...
Question : Size/Height of the Block or MText ?
Some 2D Plines are very long (2nd problem) so I would like a question like :
Label each Pline every xxxx Units ?
So on a Pline Contour of 2000 meters, I could have the elevation (Block or MText) every 50 meters ...
Of course I would like that the Block or Mtext will have to follow (rotation) the Pline (splined or not) where the label is inserted !
Currently I am using 2010 Map 3d, for water main base plans.
I use Micro Survey to process my field work. From there I open in Cad, import layers from our GIS data base for property, buildings, addresses, etc.
The only thing I have done different is from another project was copy and paste some utility layers.
Now my drawing turns any plines with width into hollow lines, and if align something my drawing will zoom to extents, also text mask does not work and i tried turning text to Mtext and it will not let me select yes for background mask.
All other drawings I check everything works fine.
I need to change the color of all lines/plines that intersect a given pline. How would I go about making the selection set of all lines that intersect that given pline.
View 8 Replies View RelatedI made this technical detail. To make an arc I use ''tan, tan, radius'' command. It looks like arc and circle is joined together, but if I move closer as you can see they aren't joined together. So how can I join them? I tried 'join' command but it won't work for me or maybe I don't know how correctly use this commad.
View 8 Replies View RelatedJust can´t find out how to join these 4 polylines:
Bank.dwg
I created many lines, and joined them together nicely..Now I have a closed complete 2D shape...I want to extrude the shape, but...
I think I need to join all the lines to become a single line first...I can't find this command... How can I unite all the lines together
I have 2 SHP files, one with lot information, the other with OCP. I created a join between the two tables but the resulting data was not spatially related. The objective is to show the land use of each lot.
View 6 Replies View Related