AutoCAD 2010 :: Generate Roofs Based On Plines
Dec 10, 2012Is there a way to generate a roof based from plines? Like this but without tracing? I need to generate multiple roofs at once with the same slope ect.
View 9 Replies
ADVERTISEMENT
AutoCAD Architecture :: Generate Roofs Based On Plines
Dec 10, 2012Is there a way to generate a roof based from plines? Like this but without tracing? I need to generate multiple roofs at once with the same slope ect.
View 9 Replies View RelatedAutoCad :: Automatically Generate Layers Based On Color?
Oct 10, 2007Is there a way to automatically generate layers based on color? I just downloaded a CAD object that's only got 1 layer but several different colored lines. It would be extremely painstaking if I had to take each and every line and place it on a different layer. It would be much easier if I could tell AutoCAD 2006 to simply split the object up by color and place each one on a different layer.
View 6 Replies View RelatedAutoCAD 2010 :: Sections From 3D Plines
May 20, 2012I have a 3d topographic survey plan. I need to take sections at various locations and would like to know the best way of going about this.
I am used to working with solids and so would normally just take a section plane but this won't work as the 3d topographic survey plan I have is made up of polylines.
Photoshop :: Generate Image Based Of All Colors Currently In Swatch
Nov 8, 2013Any method or script that enables generation of an image based of all the colors currently in the swatch? I would want it to fill a grid, with a patch of the color with the colors name underneath it, and with the name of the swatch as a header on a black background. Maybe even with the lab, cmyk and rgb values underneath each color.The colors need to be arranged in the same manner as in the swatch.
View 1 Replies View RelatedAutoCAD 2010 :: Convert Plines To Splines?
Mar 15, 2012I searched and saw lots of posts on converting a spline object into a pline, but not the other way around. I like the way that splines can use control vertices or fit points.
I know that you can apply a spline smoothing to a pline, but what I'd like to do is to convert a pline object into a spline object and splining a pline does not do that.
Any fairly easy way to do this? Are there LISP routines that do this?
AutoCAD 2010 :: Fillet PLines Keeps Original Lines
Dec 13, 2012I am attempting to fillet plines to make rounded curbs at street intersections. Whenever I create the fillet, the 2 plines that were filleted remain as they were before the fillet.
This only happens on my computer and only in AutoCAD 2011, it works fine in Civil3D 2011. We only have a limited number of Civil3D licenses or I would just use that all the time.
The attached screenshot shows an example of what happens. The 2 red lines are what were filletted (the fillet is in white). Both lines are long enough to accomodate the radius of the fillet.
What is causing this problem?
AutoCAD 2010 :: How PLines Show Up At Intersections When Width Increased
Mar 15, 2012Didn't their use to be a control for how PLines showed up at intersections when you increased the width? I can't remember where it was (dialog box, options, sys-var)?
View 5 Replies View RelatedAutoCAD 2010 :: Generate PDF And Attributes
Nov 1, 2012Would like to generate a pdf of an acad drawing and have the attributes in the pdf clickable/readable. Am I making any sense?
View 8 Replies View RelatedAutoCAD 2010 :: Generate A 3D Model Of Aircraft?
May 11, 2012i need to generate a 3D model of an aircraft from point clouds in CAD but i dont know how to start with autocad.
View 1 Replies View RelatedAutoCAD 2010 :: 3D Spirals - How To Generate Cut Sheet
Jul 18, 2013I drew a 3d spiral, and now i need to create a cut-sheet in sections (half or quarter) so I can sent to my shop for fabrication. Please see attached photos.
I want to be able to provide a cut sheet template so i can print it out and they can trace it on the sheet metal, cut however many sections required, and weld it together to create the spiral. My concern is that the top view dimensions is not an accurate dimension when the piece is bent 8 inches from the start of the spiral.
Also, my next issue would be the side wall of the spiral, and how to properly create a cut sheet on the given dimensions.
I also tried to do this in Autodesk Inventor, using the sheet metal tool, flatten command, and I was unable to flaten the object.
AutoCAD 2010 :: How To Generate 2D Drawing From 3D Model
Dec 27, 2009how to generate the 2D drawing from the 3D model with AutoCAD 2010. I ever used SolidWorks which offers this capability.
View 9 Replies View RelatedAutoCAD 2010 :: Generate Hatch Files
Oct 5, 2011It's routine generate hatch files. (pat extension). You can use them in Autocad or import in Revit.
Two commands:
DHA - tile paterns.
DHL - construction paterns.
I Hope it's work.
AutoCAD Architecture :: How To Merge Roofs
Oct 31, 2012I have some intersecting roofs but not sure how to clean them up properly..Could you possibly take a look at make recommendations.
[URL]
AutoCAD Inventor :: IPart Workflow And Vault - Generate All Or Generate Only New
Sep 4, 2012We are using iPart - iAssembly workflow with Inv-2013 and Vault Basic 2013
My question is related to released state of iparts. Currently we are generating/ releasing
all the iparts when new member is added in order to manintain the parent child version relationship
Example : say i have a ipart 41020.ipt and i have members 41020- 001 ~ 008 . I check out the parent
from Vault and add 009 member to it.
Question :
Do I have to generate all and check those in to maintain the version relationship between the child and parent inside
Vault 2013 ?
Or
Only generating 009 will maintain version relationship inside Vault 2013
Config :: Intel (R) Xeon (R) CPU E31245 @ 3.30 GHz, 16.0 GB, 64bit win7
Inventor 2013 and Vault Basic 2013
AutoCAD 2010 :: DXF Based Blocks Insert In Inches Instead Of Mm
Mar 19, 2013I have a problem when I insert blocks who were originally saved as dxf.
For years I've been recieving dxf-drawings from our suppliers, and for years I've opened them, saved them as .dwg and then inserted them into my drawings. Lately, when I insert these blocks, they're scaled up by 25.4... It appears that AutoCAD converts them to inches instead of in mm.
When I check the scale of the block in "Properties", the insertionscale is always 1.
I've checked the "UNITS" in the dxf and the dwg, both are mm. I've checked "INSUNITS", "INSUNITSDEFSOURCE" and "INSUNITSDEFTARGET", all of them have value "4", which is "mm"...
The screenshot above is taken in the dxf-file. I've used the "DIST" command on the dimension which states "326", and as you can see, the distance measured is also 326...
The screenshot below is taken after I've saved the dxf as a dwg, and then inserted the dwg-file as block into a new drawing. The same dimension is measured, and then I get this:
8280.4/25.4=326
AutoCAD 2010 :: Set Lineweight To Be Color-based Automatically?
Mar 15, 2012Is there a way to set the “lineweight” to be Color-based automatically?
I’m wondering if there is a way to set the lineweight to be color-based such that all the objects have the same color will take the same lineweight automatically.
Sure, we can control such behavior through the “bylayer” feature but I’m not sure if this very particular behavior might exist in the AutoCAD; color-based lineweigth!
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
AutoCAD 2010 :: Constraint Based On Attribute (text Box) Width?
Apr 17, 2012Is there a way to constrain a few objects to an attribute text box width? I want the background box and line to stretch, based on what is typed in that attribute box.
I know that if I make the attribute, a multi-line attribute, I can add a backgroud mask. I don't want to take this route, because the mask boundary varies, depending on what character is typed. Also, there is a gap between the mask and line I would like to maintain.
I tried some constraint stuff, but all I seem to be able to constrain is the insertion point of the text box, and not the width grip...
AutoCAD 2010 :: Linetype Is Not Scaling Based On Annotative Scale
Oct 17, 2012I have a drawing (attached) with the following settings: LTSCALE = 1, MSLTSCALE = 1, PSLTSCALE = 1.For some reason the linetype is not scaling based on the annotative scale. It will update correctly if I change the LTSCALE but for some reason it wants to ignore the MS and PSLTSCALE variables.
As a note, the drawing was converted from a Microstation drawing and the linetype is a converted Microstation linetype.Is there something in the linetype that is doing this.
AutoCAD 2010 :: Hatch Select Objects Based On Attributes
Mar 27, 2013I have some blocks that are associated with regions in my drawings. I want to select regions based on attributes in the associated blocks. Is that possible?
Is it possible to link my blocks to an external database and select the regions based on a field in the linked database?
AutoCAD 2010 :: Macros For Moving Text Based On Relative Coordinate
Oct 25, 2012I am using AutoCad 2012, with CADDUCT. On my runs of duct that go vertical, I like to stack my tag numbers beside the riser in order, so our installers can easily identify the order without a ton of section views. I am trying to figure out a macro that will do numerous things. Since my tags come out at different rotation angles, I would like to do the following commands.
Rotate object text "TAG #" to 0 degrees
move object text "TAG #" to "Snap from" & "snap insert" 6" below the tag above it
I want the numbers to align by their insert locations up and down the page, and exactly 6" on center vertically from one another. The tag numbers have a node justified to the center up and down of the text.
Revit :: Joining Walls To Roofs
Dec 20, 2012How do you join a square wall to a slanted roof so that the walls are not sticking out of the roof.
View 1 Replies View RelatedRevit :: Connect Exterior Walls To Roofs
Jan 4, 2012I got trouble connecting my exterior wall to the roof or in other words, it would be good, if the insulating layer would not be pierced by concrete (-:
Picture attached.
Revit :: Joining Roofs - Higher To Lower Roof
Jan 26, 2014Joining roofs.
I'm trying to join two roofs together by extending onto the other - Unfortunately the one to be extended is higher than the other roof (see attached image).
Both roofs are created by footprint.
Revit LT 2014
Photoshop :: Convert Pixel Based Files To Vector Based Illustrator?
Apr 23, 2012Is there a way to convert the pixel based phtoshop files to the vector based illustrator files?
View 2 Replies View RelatedAutoCAD LT :: Plines Not On A Layer
Aug 13, 2013I have these plines that keep appearing in my drawing that are not on a layer (see attached). I have never experienced this before. There are 10x duplicates stacked upon one another surrounding three separate shapes. My theory is that a hatch is creating them. I deleted them and they came back. How do I manage them and their display properties, or better yet, remove them from the drawing.
-----
AutoCAD LT 2011
AutoCAD Civil 3D 2012
AutoCAD 2013 :: Can't Join Plines
Aug 20, 2013A new problem; I can't join these plines. I have tried just 2, selecting them before entering the command but nothing happens. I need the selected line joined with the one on each end that shares that node.
View 9 Replies View RelatedAutoCad :: Adding Lengths Of Plines
Sep 30, 2013How i'm adding lengths of individual plines...I am running MEP 2013 and lately we've been doing a lot of measuring of plines...The problem i'm having is that we are supposed to add 24' to every length...So if I measure a polyline and it's 10' long, the number i'm supposed to be putting on the drawing would be 34'...Is there a way to create a command that will automatically add what I need to every pline?
View 9 Replies View RelatedAutoCad :: Joining Two Lines / Plines Into One?
Mar 9, 2012im after to join two lines into one line. ive got a rad of 10mm then a straight line.
dxf as shown, im using Lt
AutoCad 3D :: Converting DXF Lines Into Plines?
Jul 1, 2013So, I am trying to output a solid 3D model of the attached drawing. I traced it and converted it into a dxf, from there I cleaned it up, but cannot pedit. I assume it has to do with the arcs. Cannot find anything on google, so I thought I would turn to you good folks.
[URL]
AutoCAD VB :: Hatching Multiple Plines
Feb 21, 2012I have got a recordset that contains a bunch of ehandles for closed plines. Currently I cycle through the recordset, change each ehandle to an oblject and hatch it. It works fine, but is a tad slow. I would like to put all of the ehandles into a selectiion set (maybe?) and hatch them all at one time.
View 4 Replies View Related