AutoCAD 2010 :: DXF Based Blocks Insert In Inches Instead Of Mm
Mar 19, 2013
I have a problem when I insert blocks who were originally saved as dxf.
For years I've been recieving dxf-drawings from our suppliers, and for years I've opened them, saved them as .dwg and then inserted them into my drawings. Lately, when I insert these blocks, they're scaled up by 25.4... It appears that AutoCAD converts them to inches instead of in mm.
When I check the scale of the block in "Properties", the insertionscale is always 1.
I've checked the "UNITS" in the dxf and the dwg, both are mm. I've checked "INSUNITS", "INSUNITSDEFSOURCE" and "INSUNITSDEFTARGET", all of them have value "4", which is "mm"...
The screenshot above is taken in the dxf-file. I've used the "DIST" command on the dimension which states "326", and as you can see, the distance measured is also 326...
The screenshot below is taken after I've saved the dxf as a dwg, and then inserted the dwg-file as block into a new drawing. The same dimension is measured, and then I get this:
8280.4/25.4=326
View 5 Replies
ADVERTISEMENT
Jan 15, 2013
I worked with about 70 blocks that I routinely insert in drawings, at present I have an area where I keep all them in every drawing. I would like to have a bar that will contain the blocks where I can drag and drop them into place.
View 5 Replies
View Related
Aug 2, 2012
We used a bespoke program to convert our drawings to Java applets for web usage. This does not cope with dynamic blocks at present and we have started to receive drawings from our clients using them.
I need to replace this with standard static blocks based on one of two criteria. Either:
1) Replace based on visibility state (have generic chair block with multiple different chair types set by visibility type, need to replace depending on which type it is set as)
2) Replace based on parameter (have table with size set by dimensions, need to replace with static block for each dimension)
View 0 Replies
View Related
Oct 14, 2013
I am completely new to gimp I have an image that is 8in x 6in. It was previously edited in Photoshop on another computer thats how I know the actual size. When I load it into gimp, the image size is in real life the same, I can take a ruler to the screen and it measures 8in x 6in at 100% zoom. However, according to gimps rulers, the image is over 11in x 7in. So I measured what is one inch on gimps ruler and it is actually 3/8in in real life. When I create a grid to overlay the image, through Filters-Render-Patterns-Grid and I make the settings to be 1in x 1in, it too shows up based on gimps ruler measurements. I have the ruler set up in inches but a gimp inch is not a real life inch, and this shows up when I scale the image to 8in x 6in it actually makes the image 5 1/2in x 3 3/4in in real life when printed out. How can I get gimp to display a real life inch and how can I get my images to print out based on real life inches.
View 3 Replies
View Related
Feb 24, 2012
I want to re size them based on document sized in 'inches' to be set by resolution say for example: If the width or height is less than 4.72 inch the image resolution should be 150dpi; if the width or height is less than 1.33 inch the image resolution should be 300dpi; and the last one if the width or height is greater than 4.72 inch the image resolution should be 75dpi.
View 2 Replies
View Related
May 2, 2011
My firm worked on a project recently with a sheet numbering system that created long sheet numbers, ie, MH-101-R1. Since the sheet numbers were so long, they no longer fit in our normal sheet/detail/drawing label blocks. (See attached DWG for an example.)
We are looking to create either a dynamic block or some kind of block that will automatically stretch with the text length.
View 4 Replies
View Related
Jun 4, 2011
I design all of the architectural metal used on most project homes being built in Sydney at the moment.
I draw up balustrade and screening etc.
Basically what I have is a huge collection of complex dynamic blocks that I insert into my drawings, I then change all the variables to suit.
These drawings are then dimensioned, and a parts list manually written out based on the lengths etc of each type of material.
All of these drawings are exact reproductions of what is produced on the factory floor, so it is quite easy to identify the parts, but rather painfull to manually write out a cutting list.
I'd like to add attributes and/or fields for material type and length to each of these dynamic blocks, which update as the blocks are manipulated to the required sizes.
where I get stuck is that there are multiple drawing methods used to create these blocks, and I cannot seem to figure out exactly what I should be naming, and assigning length fields too, or even how to extract or what to extract!
When I extract the data, I get a mess of conflicting and confusing information that is impossible to sort correctly, as I can use the dynamic parameter field for some, but not others, and on others it is a simple line, but on others again they are polylines and the length is useless to me.
I have tried to creat a block with an attribute for each and every individual part, but when I combine these into a complex part and try to assign dynamic parameters as a single dynamic block, the previously blocked and named parts wont behave correctly.
Im not sure if im making much sense here, but in my mind it all seems simple enough, I just cant get it to actually work with my exsiting blocks...
All im really after is a simple BOM, for example, I have a dynamic block with the Style code A0-1, when this is inserted I change 3 different lengths depending on the job. This style code is made up of several components such as a 40 mm square post (coded 40SQ), an 80 sq baseplate (coded PF2) and a 50 x 25 mm handrail (coded HR5025).
I need to extract a length for the 40 sq post, a length for the 50 X 25 handrail and an item count for the baseplate.
There may be 25 of these in a drawing, all at different sizes.
The dynamic block works perfectly for drafting, but not so well for data extraction.
There are over 1100 of these dynamic blocks, created over the last 2 years, and the only missing piece in the drafting puzzle is the extracted cut-list to save a large amount of time, and I just cant get it working.
Is there a methodology I need to learn here? will I need to re-create these blocks to allow for extraction?
I have explained to my boss the theory behind all of this and he is keen for some working examples that the monkeys on the shop floor can read and understand, and Im stuck creating an extraction template that can work, even if just for proof of concept that I can refine over the next few months.
I know ACAD can do this, I know my brain has all the data, I'm just not getting the ACAD>BRAIN interface working here.
View 4 Replies
View Related
Sep 22, 2013
We are looking for a solution to manage the inventory of a very extensive network with mainly linear assets. Instead of a standard database/inventory solution, we would like to manage the inventory from a plan, from autocad DWG. Meaning that all the objects and relations between objects are defined in the DWG, then uploaded to a relational database and used by various maintenance and operational utilities.
how we would define the relations between objects. For example, how would we say that one object is attached to another object? Can you make a reference from one object to another in the attributes of a block? (but it has to be a strong reference, to an ID).
View 3 Replies
View Related
Jan 4, 2012
in order to streamline some of my duties i wonder if theres a way to have a dynamic block not only that can change it's length and the dimension for that length (easy) but will also add features to the part. For example can one be made that when stretching its length that once it reaches a certain length automatically split into two sections and keep those 2 sections equal? Also can it be made to contain a tag that keeps track of the lengths as well as number of joints between sections multiplied by a constant?
View 1 Replies
View Related
May 29, 2013
I'm trying to create a pline in a dynamic block where the length is determined by two values I would input into properties or as attributes.
The first value 'A' will be a ground surface elevation
The second value 'B' will be a ground water elevation
I would like to the pline to have a length of A minus B.
I would then also like to have mtext (or any other method of display text) to display the values of A and B.
For example, if I have a ground surface of 102 and a ground water of 91, my line length will be 11, and I can display a label of '102' at the top of the line and '91' at the bottom of the line.
I've created dynamic blocks before, but none that have used an expression of two values or having to display inputted values. I'm not really sure where to start with this, or if it's even possible.
View 7 Replies
View Related
Jan 25, 2013
Can I scale up a 100+ blocks at once and have each base point as the blocks insert point?
View 9 Replies
View Related
Mar 20, 2013
Out of nowhere my AutoCAD commands such as line, offset, circle, etc will only work if i type in the amount in inches. I use feet / inches when i use these commands. It says specify second point... Not sure what this means. For example I want to offset a line 15'-8". It won't let me do that. If i offset a line at 146" it lets me do it.
View 5 Replies
View Related
Oct 8, 2012
Is there a way that I can add multiple polylines in feet and inches? I downloaded some lisp routines, but they are not in feet and inches.
View 2 Replies
View Related
Feb 16, 2011
I am having a right torrid time with this drawing first of all the seat numbers (see previous post!!) and now I can't insert a block!!
I select insert block and the dialogue box comes up - I then pick the block that I want and I check the insertion point box to specify on screen but uncheck the scale specify on screen and set it to 1.0 which is the same as the block unit, I then click ok and select a point on the drawing where I would like the block to go by clicking my left mouse button and nothing happens!
I have tried upping the scale of the block but this still does not work!
View 4 Replies
View Related
Jun 1, 2012
I'm trying to get a routine that creates and inserts a copy of all the block entities in a DWG. For some reason the code causes CAD to hang? See attachment for code.
View 6 Replies
View Related
Aug 28, 2013
I have a friend that is using AutoCad Mechanical which comes with blocks of structural members to insert, she is using Cad 2011. In one drawing if she inserts a channel and say the channel is 8" long, it inserts correctly but in other drawings if she goes to insert the same channel, it insert at 16'-0". Why?????
View 4 Replies
View Related
Jan 23, 2013
I drew several components in one drawing and saved them with WBLOCK. I opened the drawing into which I wanted to insert the blocks but they are no longer soilds. They are just the lines upon which the original soilids were based. What have I done wrong?
UPDATE: I purged the drawing and the blocks inserted correctly.
View 1 Replies
View Related
Sep 5, 2012
My coworkers are positive that they have been able to INSERT multiple blocks at one time but now when using the INSERT command, they can only select a single block for insertion. I tried recreating the issue and it does the same thing for me both using DESIGN CENTER and the INSERT command. Is there a setting somewhere that controls the number of blocks you can INSERT at one time or are they just delirious?
If it isn't possible to do in AutoCAD, then is there possibly a LISP routine out there that will achieve this?
View 4 Replies
View Related
Jun 26, 2013
I am a land surveyor and am looking for a routine that will look at my txt files exported from the field data collector, and upon exporting into C3D, will look at the descriptor and place an appropriate block on the node. For example, if the collector code was for an IP (iron pin), when the points are imported into the drawing, a solid round block would be placed on each node with the IP description. Same if for trees, concrete monuments, fire hydrants, etc.
View 9 Replies
View Related
Sep 1, 2011
I have a block containing a visibility parameter but the problem is when it is inserted, that visibility parameter is in a different place to where I put it in the block editor.
My geometry is around the 0,0 origin (which is also the base) and the visibility parameter was placed at 0,-25 in the block editor however once it is inserted in a drawing it shows up at 270,130.
No matter where I move it back to, it always reverts back to another position. Every time I try to change and reinsert, I purge the drawing so I know it is not picking up on something else.
View 1 Replies
View Related
Aug 22, 2013
I need to insert two different (separate) title blocks into my idw drawings so both show on the drawing. One is the real Title block, and one is a Revision History block. I have listed them as Title blocks under Drawing Resources, but Inventor won't allow me to insert both. Is there any way round this?
I do not want the Revision History block as a Symbol.
Inventor 2011; MS Windows 7-64; i5-2500; 8Gb; GF550Ti.
View 9 Replies
View Related
Jun 20, 2012
We are using LT 2011 and 2012.My company has cad standards is for everything to be drawn on a snap. All of our blocks are designed with that in mind. Now we want to start using tool palettes to insert our blocks. When we have tested using tool palettes, with the blocks we have made, sometimes the block will drag into the drawing to snap and sometimes it wont. I have also read online that tool palettes blocks will not go to snap at all. We have seen it work (sometimes).
View 6 Replies
View Related
Nov 15, 2013
It inserts the first block and then quits. I had to change the the file to a txt to get it to upload
View 6 Replies
View Related
Mar 22, 2012
I am working with a client who has a standard tool pallete with blocks. I already have imported/customized the tool palletes as per their manual. The blocks show up in the tool paleltte, but when i drag to insert them. It can't locate the symbols file and gives me this error : Source drawing "H:MASTER-SYMBOLS.dwg for block "X" not found.
I have the master symbols drawing as indicated and pathed the location through optionsfiles tool palletes file locations.
View 4 Replies
View Related
Dec 3, 2012
I was inserting blocks. I was trying to insert more than one block at the same time. If I have to insert each block every single time, that's just so slow. There must be another way to make it easier to bring up more than one block at the same time.
I am using both Mac version and windows version of AutoCAD. In the mac version, when tried to open up block editor, for some reason, it says the BLOCKEDITOR = 0 (read only). I couldn't even get into block editor to make changes for my block.
View 3 Replies
View Related
Jul 19, 2011
I have found a few things on here, but not exactly what I want. We have a excel spreadsheet with borehole references and coordinates. I need to be able to insert a block according to these coordinates and the borehole reference as the attribute.
View 5 Replies
View Related
Jun 27, 2013
how to insert TAGS in existing dynamic blocks. Is there a way to then make the tag move around so that I can move it anywhere. If too many blocks have to placed next to each other the tags might make the drawing too busy so I want to be able to move the tag around after the block has been placed.
View 3 Replies
View Related
Oct 17, 2011
I am trying to insert a block into a drawing that uses dynamic blocks. I want the block to be associated to the dynamic block, so that when I alter a linear stretch parameter on the dynamic block it moves the other block.
I am probably missing something obvious, but have now googled my mind into a numb state and can't make any more progress.
View 3 Replies
View Related
Apr 26, 2013
I'm new to .net for autocad, but very familiar with c#. I studied some samples about creating a block from c#. I have a form for some basic input. When the user presses OK the code checks if the blockname is already in use. When no it creates the block using following
private void make_block() { double nextpoint = 0.0; double linedis = 7.3634; Document doc = Autodesk.AutoCAD.ApplicationServices.Application.DocumentManager.MdiActiveDocument; Database db = doc.Database; Editor ed = doc.Editor; using (Transaction tr = db.TransactionManager.StartTransaction()) {
[code]......
The code runs successfully (meaning i don't get any errors), but when I want to insert the block it isn't in the list of blocks.
View 2 Replies
View Related
Jan 8, 2013
Is it possible to change the length of a line based on the length of an attribute?
I'd like to make the line a MINIMUM length of X" (I haven't decided how long yet--but know I'll need a minimum). But then after the user fills in the attribute, I'd like the length of the line to change to the length of the attribute plus a small amount (again, I haven't decided yet how much extra).
View 3 Replies
View Related
Mar 15, 2012
Is there a way to set the “lineweight” to be Color-based automatically?
I’m wondering if there is a way to set the lineweight to be color-based such that all the objects have the same color will take the same lineweight automatically.
Sure, we can control such behavior through the “bylayer” feature but I’m not sure if this very particular behavior might exist in the AutoCAD; color-based lineweigth!
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
View 8 Replies
View Related
