I drew several components in one drawing and saved them with WBLOCK. I opened the drawing into which I wanted to insert the blocks but they are no longer soilds. They are just the lines upon which the original soilids were based. What have I done wrong?
UPDATE: I purged the drawing and the blocks inserted correctly.
In VBA environment I'm seeking a method to detect the orientation of blocs and solids in 3D space through the X,Y and Z axis.
There is a object.method? or a procedure?
with word EXPLODE i don't meen the explode command. To brake appart part (block or solid).
But i would like to "explode" all parts (blocks or solids) appart and move eatch of them some disstance appart from enother for presentation purposes and then join them together if i would like again with a command to return to original place.
Any way to do that automaticly with a command in Autocad 2008?
In .NET environment I'm seeking a method to detect the orientation (rotation angle) of blocks and solids in 3D space through the X,Y and Z axis.
There is a object.method? or a procedure?
Can I scale up a 100+ blocks at once and have each base point as the blocks insert point?
View 9 Replies View RelatedI am having a right torrid time with this drawing first of all the seat numbers (see previous post!!) and now I can't insert a block!!
I select insert block and the dialogue box comes up - I then pick the block that I want and I check the insertion point box to specify on screen but uncheck the scale specify on screen and set it to 1.0 which is the same as the block unit, I then click ok and select a point on the drawing where I would like the block to go by clicking my left mouse button and nothing happens!
I have tried upping the scale of the block but this still does not work!
I'm trying to get a routine that creates and inserts a copy of all the block entities in a DWG. For some reason the code causes CAD to hang? See attachment for code.
View 6 Replies View RelatedI have a friend that is using AutoCad Mechanical which comes with blocks of structural members to insert, she is using Cad 2011. In one drawing if she inserts a channel and say the channel is 8" long, it inserts correctly but in other drawings if she goes to insert the same channel, it insert at 16'-0". Why?????
View 4 Replies View RelatedMy coworkers are positive that they have been able to INSERT multiple blocks at one time but now when using the INSERT command, they can only select a single block for insertion. I tried recreating the issue and it does the same thing for me both using DESIGN CENTER and the INSERT command. Is there a setting somewhere that controls the number of blocks you can INSERT at one time or are they just delirious?
If it isn't possible to do in AutoCAD, then is there possibly a LISP routine out there that will achieve this?
I am a land surveyor and am looking for a routine that will look at my txt files exported from the field data collector, and upon exporting into C3D, will look at the descriptor and place an appropriate block on the node. For example, if the collector code was for an IP (iron pin), when the points are imported into the drawing, a solid round block would be placed on each node with the IP description. Same if for trees, concrete monuments, fire hydrants, etc.
View 9 Replies View RelatedI have a block containing a visibility parameter but the problem is when it is inserted, that visibility parameter is in a different place to where I put it in the block editor.
My geometry is around the 0,0 origin (which is also the base) and the visibility parameter was placed at 0,-25 in the block editor however once it is inserted in a drawing it shows up at 270,130.
No matter where I move it back to, it always reverts back to another position. Every time I try to change and reinsert, I purge the drawing so I know it is not picking up on something else.
I worked with about 70 blocks that I routinely insert in drawings, at present I have an area where I keep all them in every drawing. I would like to have a bar that will contain the blocks where I can drag and drop them into place.
View 5 Replies View RelatedI need to insert two different (separate) title blocks into my idw drawings so both show on the drawing. One is the real Title block, and one is a Revision History block. I have listed them as Title blocks under Drawing Resources, but Inventor won't allow me to insert both. Is there any way round this?
I do not want the Revision History block as a Symbol.
Inventor 2011; MS Windows 7-64; i5-2500; 8Gb; GF550Ti.
We are using LT 2011 and 2012.My company has cad standards is for everything to be drawn on a snap. All of our blocks are designed with that in mind. Now we want to start using tool palettes to insert our blocks. When we have tested using tool palettes, with the blocks we have made, sometimes the block will drag into the drawing to snap and sometimes it wont. I have also read online that tool palettes blocks will not go to snap at all. We have seen it work (sometimes).
View 6 Replies View RelatedIt inserts the first block and then quits. I had to change the the file to a txt to get it to upload
View 6 Replies View RelatedI am working with a client who has a standard tool pallete with blocks. I already have imported/customized the tool palletes as per their manual. The blocks show up in the tool paleltte, but when i drag to insert them. It can't locate the symbols file and gives me this error : Source drawing "H:MASTER-SYMBOLS.dwg for block "X" not found.
I have the master symbols drawing as indicated and pathed the location through optionsfiles tool palletes file locations.
I was inserting blocks. I was trying to insert more than one block at the same time. If I have to insert each block every single time, that's just so slow. There must be another way to make it easier to bring up more than one block at the same time.
I am using both Mac version and windows version of AutoCAD. In the mac version, when tried to open up block editor, for some reason, it says the BLOCKEDITOR = 0 (read only). I couldn't even get into block editor to make changes for my block.
I have a problem when I insert blocks who were originally saved as dxf.
For years I've been recieving dxf-drawings from our suppliers, and for years I've opened them, saved them as .dwg and then inserted them into my drawings. Lately, when I insert these blocks, they're scaled up by 25.4... It appears that AutoCAD converts them to inches instead of in mm.
When I check the scale of the block in "Properties", the insertionscale is always 1.
I've checked the "UNITS" in the dxf and the dwg, both are mm. I've checked "INSUNITS", "INSUNITSDEFSOURCE" and "INSUNITSDEFTARGET", all of them have value "4", which is "mm"...
The screenshot above is taken in the dxf-file. I've used the "DIST" command on the dimension which states "326", and as you can see, the distance measured is also 326...
The screenshot below is taken after I've saved the dxf as a dwg, and then inserted the dwg-file as block into a new drawing. The same dimension is measured, and then I get this:
8280.4/25.4=326
I have found a few things on here, but not exactly what I want. We have a excel spreadsheet with borehole references and coordinates. I need to be able to insert a block according to these coordinates and the borehole reference as the attribute.
View 5 Replies View Relatedhow to insert TAGS in existing dynamic blocks. Is there a way to then make the tag move around so that I can move it anywhere. If too many blocks have to placed next to each other the tags might make the drawing too busy so I want to be able to move the tag around after the block has been placed.
View 3 Replies View RelatedI am trying to insert a block into a drawing that uses dynamic blocks. I want the block to be associated to the dynamic block, so that when I alter a linear stretch parameter on the dynamic block it moves the other block.
I am probably missing something obvious, but have now googled my mind into a numb state and can't make any more progress.
I'm new to .net for autocad, but very familiar with c#. I studied some samples about creating a block from c#. I have a form for some basic input. When the user presses OK the code checks if the blockname is already in use. When no it creates the block using following
private void make_block() { double nextpoint = 0.0; double linedis = 7.3634; Document doc = Autodesk.AutoCAD.ApplicationServices.Application.DocumentManager.MdiActiveDocument; Database db = doc.Database; Editor ed = doc.Editor; using (Transaction tr = db.TransactionManager.StartTransaction()) {
[code]......
The code runs successfully (meaning i don't get any errors), but when I want to insert the block it isn't in the list of blocks.
What I am trying to do is create a selection set of blocks with the same name. Then step through the selection set and if the block has an attribute "Tag" with a Specific "Value" then get the insert point.
View 2 Replies View RelatedI'm trying to insert our company logo (a DXF file) into the a title block definition however the insertion point seems to default to 0,0.How can I insert it with a user defined insertion point?
You will see from the attached screen snipe what I mean about being forced to insert it at the 0,0, coordinates. I'd like to insert it into clear space then scale it and move it into replace the existing logo.
I have a DB with 2 visibility's. I want to put add to tool palette and have 2 tools....one to insert showing visibility number 1 and the other tool to insert showing visibility number 2.
View 2 Replies View RelatedI am testing using script files to automate inserting blocks for As-Built drawings. My script files run fine, but AutoCAD is placing the blocks at a location that is different than what the input on the command line shows. For instance, I am placing a block at (6,6), which is reflected in the command line, but the block is actually placed at (6,5.898). The 5.898 does not appear anywhere in my script file, and the command line even shows that (6,6) was entered for the insertion point.
View 4 Replies View RelatedBasically we have a number of different procedures that need to be written in each drawing. Each drawing uses one of 5 or so procedures. Usually we type it out every time which is a pain or copy paste. We also tried making word documents and inserting them that way but it got a little buggy. Is there any way to have 5 or so pre made text blocks to pick which to insert onto different types of drawings but that can be global used across a few systems?
We have a small group of workers all on the vault server. Basically I just want to be able to have a finished drawing. Click something that will open a list of my pre made text blocks, and insert one into the drawing that I can scale etc. We use Inventor 2011.
I need to insert a Key Plan as a small part in my title blocks. I have a key plan ready in my model section. I did tried to play around in the block editor but could not find anything useful. I wish I could insert the key plan like viewport in the layout section.
On the side, my file directory always showed up on the paper when I printed my drawing out. Do you know how I can get rid of this ?
I found this LISP code that can insert a block at coordinates from an ASCII.
(defun c:universal( / file f a osmode);PointsToBlocks(while (not file)(setq file (getfiled "Input file" "coords" "txt" 4)))(setq f (open file "r")osmode (getvar "OSMODE"))(setvar "OSMODE" 0)(while (setq a (read-line f))(command "._insert" "block1" a 1 1 0))(setvar "OSMODE" osmode)(princ)
What I want to be able to do is insert blocks from an ASCII and also set the x-, y-, and z-scales.
For example, I have these lines in ASCII, the data points refer to X position, Y position, Z position, X scale, Y scale, and Z scale.
30.593589,21.274607,26.235255,0.172826,0.766324,0.066442
30.710182,21.379792,27.054248,0.130816,0.700035,0.043114
I found this routine but It doesn't work really good (see attachment):
1. We can select block instead of typing the name of it (or simply add this option)
2. That the undo command undo the whole lsp routine instead of undoing all single insertion.
3. That we can Hit the escape key at any point in the routine and it stops the routine correctly instead of writing "too many argu" maybe by undoing the insertion or by stopping the routine correctly at this point.
4. I just found that it does not paste the block directly on the points...? Finally this lsp didn't work at all !
I would like to have a lsp that do SIMPLY this:
1 : Ask wich "points" you want to convert (You know these points that you can change the appearrance in the menu format point style, thats what I mean by "points"). And By the way it would be cool if I could choose to convert the points or to paste my block on those without converting them but it is not that important.
2. Select block in the block listing of insert block popup window and paste it by his default insertion point to all the selected points.
Infos: New blocks on current layer.
You have a dwg with multiple sets of different blocks and a circle you want to place on the insert point of each set blocks.
You select the circle then select one of the blocks in the set and the circle is placed on the insert point of each of the blocks in that set. It would save time from doing it manually and save on mistakes.