AutoCAD 2013 :: Insert Multiple Blocks Using Script?
Nov 15, 2013It inserts the first block and then quits. I had to change the the file to a txt to get it to upload
View 6 Replies
ADVERTISEMENT
AutoCAD 2013 :: How To Insert Multiple Blocks At Same Time
Dec 3, 2012I was inserting blocks. I was trying to insert more than one block at the same time. If I have to insert each block every single time, that's just so slow. There must be another way to make it easier to bring up more than one block at the same time.
I am using both Mac version and windows version of AutoCAD. In the mac version, when tried to open up block editor, for some reason, it says the BLOCKEDITOR = 0 (read only). I couldn't even get into block editor to make changes for my block.
AutoCAD .NET :: Insert Multiple Blocks Within One DWG?
Jun 1, 2012I'm trying to get a routine that creates and inserts a copy of all the block entities in a DWG. For some reason the code causes CAD to hang? See attachment for code.
View 6 Replies View RelatedAutoCad :: INSERT Multiple Blocks At One Time?
Sep 5, 2012My coworkers are positive that they have been able to INSERT multiple blocks at one time but now when using the INSERT command, they can only select a single block for insertion. I tried recreating the issue and it does the same thing for me both using DESIGN CENTER and the INSERT command. Is there a setting somewhere that controls the number of blocks you can INSERT at one time or are they just delirious?
If it isn't possible to do in AutoCAD, then is there possibly a LISP routine out there that will achieve this?
AutoCAD .NET :: Create Selection Set And Get Insert Point Of Multiple Blocks
Jul 3, 2012What I am trying to do is create a selection set of blocks with the same name. Then step through the selection set and if the block has an attribute "Tag" with a Specific "Value" then get the insert point.
View 2 Replies View RelatedAutoCAD 2013 :: Blocks Insert At Different Coordinates From Those Entered In Command Line
Jul 10, 2012I am testing using script files to automate inserting blocks for As-Built drawings. My script files run fine, but AutoCAD is placing the blocks at a location that is different than what the input on the command line shows. For instance, I am placing a block at (6,6), which is reflected in the command line, but the block is actually placed at (6,5.898). The 5.898 does not appear anywhere in my script file, and the command line even shows that (6,6) was entered for the insertion point.
View 4 Replies View RelatedAutoCad :: Insert Dynamic Block From File With Multiple Dynamic Blocks
Jul 16, 2010I have a drawing ("SURUBURI.dwg") with several dynamic blocks ("M12", "M16", "M18" ... an so on...). I want to insert in my current drawing, one of the blocks from SURUBURI.dwg, for instance the block named "M12".
For that i tried creating a new command "INSERT_M12" that has the following script :
^C^C-INSERT; "I:/Ionut Mihaila/Goodies/SURUBURI.dwg/M12"
Now obvious that doesn't work, but i think it shows clearly what i want to accomplish. So is there an other way to do this?
AutoCAD 2013 :: Change Color Of Multiple Blocks?
Nov 18, 2012If we want to change the color of a block we have to open block editor and change the color from there.
If in a design we have 100 blocks and we want to change their color to the same (say black), how can we do that? Do we have to do it for every single block or can we select all 100 blocks and change the color uniformly?
AutoCAD 2013 :: Way To Calculate Lengths Of Multiple Blocks
Jul 24, 2012Are there any working .arx files or lisp routines that would enable me to calculate a total length of multiple blocks ? I know there is TLEN out there but this does't work for blocks, I need something that will calc combined lenghts of my user defined blocks which are basically simple lines of varying lenghts.
View 5 Replies View RelatedAutoCAD 2013 :: Blocks Insert At Large Scale In 2014 - Correct Scale In 2012
Nov 22, 2013I am trying to insert a block into a file in Acad 2014 and it comes in too large. If I insert the same block into the same file using Acad 2012 it comes in at the correct scale. Doesn't seem to matter if insunits is 0 or 1, or insunitsdefsource or insunitsdeftarget are also 0 or 1.
There must be some variable or variables I'm missing.
AutoCAD 2013 :: Select Similar - Using Dynamic Blocks With Multiple Visibility States
Sep 26, 2013we have moved from AutoCAD MEP 2012 to AutoCAD 2014 recently using Dynamic blocks with multiple visibility states.
in 2012 we could select a dynamic block with a specific visibility state and select similar, it would only select the visibility state that was previously selected.
in 2014 that is no longer an option WTH?
i have tried a couple of system variables to no avail (pickadd, selectionmode)2014
selectionmode is not a valid SV in 2012
AutoCAD 2013 :: Adapt Lisp To Allow To Select Multiple Target Blocks To Be Overwritten
Oct 22, 2013I've found a .lsp that does nearly what I require. The lisp that I've got allows you to identify a block, and have another block replace it.
Is it possible to adapt this lisp to allow you to select multiple target blocks to be overwritten?
(defun c:rblk (/ pre nb ss i en ed) (while (or (not pre) (not (snvalid pre)))
(setq pre (getstring "Existing BLOCKs Name Prefix: "))) (while (not nb) (setq nb (getstring "
New BLOCK Name: "))
[Code] .....
In this particular instance, I'm trying to have multiple different door symbols in a 2D plan overwritten with a uniform marker.
AutoCad :: Scale Up 100+ Blocks At Once And Have Each Base Point As Blocks Insert Point?
Jan 25, 2013Can I scale up a 100+ blocks at once and have each base point as the blocks insert point?
View 9 Replies View RelatedAutoCad :: Unable To Insert Blocks
Feb 16, 2011I am having a right torrid time with this drawing first of all the seat numbers (see previous post!!) and now I can't insert a block!!
I select insert block and the dialogue box comes up - I then pick the block that I want and I check the insertion point box to specify on screen but uncheck the scale specify on screen and set it to 1.0 which is the same as the block unit, I then click ok and select a point on the drawing where I would like the block to go by clicking my left mouse button and nothing happens!
I have tried upping the scale of the block but this still does not work!
AutoCAD 2013 :: Unnamed Blocks Inside Blocks
Feb 19, 2013I received a file that has a large number of blocks with unnamed blocks inside. I need them all to be by layer, and i really don't want to explode it.
How can I can do it?
AutoCad 2D :: Blocks Of Structural Members To Insert
Aug 28, 2013I have a friend that is using AutoCad Mechanical which comes with blocks of structural members to insert, she is using Cad 2011. In one drawing if she inserts a channel and say the channel is 8" long, it inserts correctly but in other drawings if she goes to insert the same channel, it insert at 16'-0". Why?????
View 4 Replies View RelatedAutoCad 3D :: How To Insert Blocks But They Are No Longer Solids
Jan 23, 2013I drew several components in one drawing and saved them with WBLOCK. I opened the drawing into which I wanted to insert the blocks but they are no longer soilds. They are just the lines upon which the original soilids were based. What have I done wrong?
UPDATE: I purged the drawing and the blocks inserted correctly.
AutoCad :: Program To Insert Blocks Into Drawings?
Jun 26, 2013I am a land surveyor and am looking for a routine that will look at my txt files exported from the field data collector, and upon exporting into C3D, will look at the descriptor and place an appropriate block on the node. For example, if the collector code was for an IP (iron pin), when the points are imported into the drawing, a solid round block would be placed on each node with the IP description. Same if for trees, concrete monuments, fire hydrants, etc.
View 9 Replies View RelatedAutoCAD Dynamic Blocks :: Parameters Moving On Insert
Sep 1, 2011I have a block containing a visibility parameter but the problem is when it is inserted, that visibility parameter is in a different place to where I put it in the block editor.
My geometry is around the 0,0 origin (which is also the base) and the visibility parameter was placed at 0,-25 in the block editor however once it is inserted in a drawing it shows up at 270,130.
No matter where I move it back to, it always reverts back to another position. Every time I try to change and reinsert, I purge the drawing so I know it is not picking up on something else.
AutoCAD 2010 :: Creating A Place To Insert Blocks
Jan 15, 2013I worked with about 70 blocks that I routinely insert in drawings, at present I have an area where I keep all them in every drawing. I would like to have a bar that will contain the blocks where I can drag and drop them into place.
View 5 Replies View RelatedAutoCAD Inventor :: Insert Two Title Blocks In IDW Drawings
Aug 22, 2013I need to insert two different (separate) title blocks into my idw drawings so both show on the drawing. One is the real Title block, and one is a Revision History block. I have listed them as Title blocks under Drawing Resources, but Inventor won't allow me to insert both. Is there any way round this?
I do not want the Revision History block as a Symbol.
Inventor 2011; MS Windows 7-64; i5-2500; 8Gb; GF550Ti.
AutoCAD LT :: Tool Palettes Blocks To Insert To Snap?
Jun 20, 2012We are using LT 2011 and 2012.My company has cad standards is for everything to be drawn on a snap. All of our blocks are designed with that in mind. Now we want to start using tool palettes to insert our blocks. When we have tested using tool palettes, with the blocks we have made, sometimes the block will drag into the drawing to snap and sometimes it wont. I have also read online that tool palettes blocks will not go to snap at all. We have seen it work (sometimes).
View 6 Replies View RelatedAutoCAD Civil 3D :: Tool Palette - Blocks Won't Insert
Mar 22, 2012I am working with a client who has a standard tool pallete with blocks. I already have imported/customized the tool palletes as per their manual. The blocks show up in the tool paleltte, but when i drag to insert them. It can't locate the symbols file and gives me this error : Source drawing "H:MASTER-SYMBOLS.dwg for block "X" not found.
I have the master symbols drawing as indicated and pathed the location through optionsfiles tool palletes file locations.
AutoCAD 2010 :: DXF Based Blocks Insert In Inches Instead Of Mm
Mar 19, 2013I have a problem when I insert blocks who were originally saved as dxf.
For years I've been recieving dxf-drawings from our suppliers, and for years I've opened them, saved them as .dwg and then inserted them into my drawings. Lately, when I insert these blocks, they're scaled up by 25.4... It appears that AutoCAD converts them to inches instead of in mm.
When I check the scale of the block in "Properties", the insertionscale is always 1.
I've checked the "UNITS" in the dxf and the dwg, both are mm. I've checked "INSUNITS", "INSUNITSDEFSOURCE" and "INSUNITSDEFTARGET", all of them have value "4", which is "mm"...
The screenshot above is taken in the dxf-file. I've used the "DIST" command on the dimension which states "326", and as you can see, the distance measured is also 326...
The screenshot below is taken after I've saved the dxf as a dwg, and then inserted the dwg-file as block into a new drawing. The same dimension is measured, and then I get this:
8280.4/25.4=326
AutoCad :: Insert Blocks From Excel With Attribute Info?
Jul 19, 2011I have found a few things on here, but not exactly what I want. We have a excel spreadsheet with borehole references and coordinates. I need to be able to insert a block according to these coordinates and the borehole reference as the attribute.
View 5 Replies View RelatedAutoCad 2D :: How To Insert TAGS In Existing Dynamic Blocks
Jun 27, 2013how to insert TAGS in existing dynamic blocks. Is there a way to then make the tag move around so that I can move it anywhere. If too many blocks have to placed next to each other the tags might make the drawing too busy so I want to be able to move the tag around after the block has been placed.
View 3 Replies View RelatedAutoCad :: How To Insert A Block Into Drawing Uses Dynamic Blocks
Oct 17, 2011I am trying to insert a block into a drawing that uses dynamic blocks. I want the block to be associated to the dynamic block, so that when I alter a linear stretch parameter on the dynamic block it moves the other block.
I am probably missing something obvious, but have now googled my mind into a numb state and can't make any more progress.
AutoCAD .NET :: Creating Block And Insert Into List Of Blocks
Apr 26, 2013I'm new to .net for autocad, but very familiar with c#. I studied some samples about creating a block from c#. I have a form for some basic input. When the user presses OK the code checks if the blockname is already in use. When no it creates the block using following
private void make_block() { double nextpoint = 0.0; double linedis = 7.3634; Document doc = Autodesk.AutoCAD.ApplicationServices.Application.DocumentManager.MdiActiveDocument; Database db = doc.Database; Editor ed = doc.Editor; using (Transaction tr = db.TransactionManager.StartTransaction()) {
[code]......
The code runs successfully (meaning i don't get any errors), but when I want to insert the block it isn't in the list of blocks.
AutoCAD Inventor :: How To Insert Blocks Into Title Block Definitions
Mar 20, 2012I'm trying to insert our company logo (a DXF file) into the a title block definition however the insertion point seems to default to 0,0.How can I insert it with a user defined insertion point?
You will see from the attached screen snipe what I mean about being forced to insert it at the 0,0, coordinates. I'd like to insert it into clear space then scale it and move it into replace the existing logo.
AutoCAD Dynamic Blocks :: Insert From Tool Palette With Different Visibility
May 11, 2011I have a DB with 2 visibility's. I want to put add to tool palette and have 2 tools....one to insert showing visibility number 1 and the other tool to insert showing visibility number 2.
View 2 Replies View RelatedAutoCAD Inventor :: Pre-made Saved Text Blocks To Insert Into Drawings?
Feb 2, 2012Basically we have a number of different procedures that need to be written in each drawing. Each drawing uses one of 5 or so procedures. Usually we type it out every time which is a pain or copy paste. We also tried making word documents and inserting them that way but it got a little buggy. Is there any way to have 5 or so pre made text blocks to pick which to insert onto different types of drawings but that can be global used across a few systems?
We have a small group of workers all on the vault server. Basically I just want to be able to have a finished drawing. Click something that will open a list of my pre made text blocks, and insert one into the drawing that I can scale etc. We use Inventor 2011.