Are there any working .arx files or lisp routines that would enable me to calculate a total length of multiple blocks ? I know there is TLEN out there but this does't work for blocks, I need something that will calc combined lenghts of my user defined blocks which are basically simple lines of varying lenghts.
View 5 Replies
How to calculate the lengths of the first and write each profile..In Part 2, I calculate the total length of ground.
View 1 Replies View RelatedI'm creating an assembly and in this assembly I need to add some foam pieces. These pieces are the exact same part number but can vary in length. How can I make such a part so that i can insert it into an assembly multiple times but have different lengths? I'd rather not make multiple pieces of foam for every single assembly for all of our product lines and am looking for the "one foam to rule them all" option. I would assume this would be an ilogic component I would have to create, but i haven't really made a part like that yet.
View 3 Replies View RelatedIt inserts the first block and then quits. I had to change the the file to a txt to get it to upload
View 6 Replies View RelatedI was inserting blocks. I was trying to insert more than one block at the same time. If I have to insert each block every single time, that's just so slow. There must be another way to make it easier to bring up more than one block at the same time.
I am using both Mac version and windows version of AutoCAD. In the mac version, when tried to open up block editor, for some reason, it says the BLOCKEDITOR = 0 (read only). I couldn't even get into block editor to make changes for my block.
If we want to change the color of a block we have to open block editor and change the color from there.
If in a design we have 100 blocks and we want to change their color to the same (say black), how can we do that? Do we have to do it for every single block or can we select all 100 blocks and change the color uniformly?
Is there an Autocad command that will list the lengths of several seperate lines and combine the lengths similar to the areas command?
View 3 Replies View RelatedI'm trying to extract the 3d length of multiple lines into either a CSV, SSV or directly into a table, I have done a fair amount of research but all of the solutions seem to be for later versions of CAD than the one i'm currently using, I think 2008 is the first to have embedded data extraction for objects as well as attributes?
View 6 Replies View Relatedwe have moved from AutoCAD MEP 2012 to AutoCAD 2014 recently using Dynamic blocks with multiple visibility states.
in 2012 we could select a dynamic block with a specific visibility state and select similar, it would only select the visibility state that was previously selected.
in 2014 that is no longer an option WTH?
i have tried a couple of system variables to no avail (pickadd, selectionmode)2014
selectionmode is not a valid SV in 2012
I've found a .lsp that does nearly what I require. The lisp that I've got allows you to identify a block, and have another block replace it.
Is it possible to adapt this lisp to allow you to select multiple target blocks to be overwritten?
(defun c:rblk (/ pre nb ss i en ed) (while (or (not pre) (not (snvalid pre)))
(setq pre (getstring "Existing BLOCKs Name Prefix: "))) (while (not nb) (setq nb (getstring "
New BLOCK Name: "))
[Code] .....
In this particular instance, I'm trying to have multiple different door symbols in a 2D plan overwritten with a uniform marker.
CorelDraw_ExtendedLines.JPG
I have a time consuming problem that I was hoping a work-around or solution could be found for.
Some background: I use CorelDraw sort of as a CAD file creation software. The tool I use traces out straight, horizontal and vertical lines. At times, there are areas that need to be excluded being processed over, so my design has holes and gaps in it. The tricky part is, the tool I use needs time to accelerate up to full speed before I want it to start it's process. This requires that I add the same length to every single line in the layer (different layers need different added lengths). The problem that I run into, is that if I select multiple groups of lines that are not the same length and try to extend them, CorelDraw sees them as one group and extends the largest lines the right distance, but shorter lines get a different percentage of the distance, and gaps get shifted. I put in pictures of what I am talking about (a before, a good, and a bad).
can I select all the lines in a layer and tell CorelDraw to add X length to all of them, while keeping their center positions the same? It would save me a good deal of time.
I have a drawing which contains about 100 "areas". These areas are closed polylines. I would like to get a total area of all these polylines.
I have tried using AutoCAD 2002's AREA command, but I am only able to select one item at a time, (AREA, Add, Object). This is fine for calculating a few areas. It gives me a running total of each item that I select.
Using the LIST command works OK for a few items, but you still have to wade through all the other information to get the area info for each item.
Is there a way to select crossing ALL the areas that I have, and have it return a total?
I use flat piano hinges on doors for many of the machines we build. I would like to be able to calculate the total length of multiple doors on a single machine. We buy these hinges so it needs to go on a buy out parts list.
So here is my problem:
To make it a useable hinge I build an assembly from two hinge halves.
This allows me to check for interference within the machine when the door gets opened.
I set the BOM structure of the assembly to purchased so it shows up on my buy out list.
Both halves of the hinge are set to normal.
There are hinges of different lengths on the same machine.
I can link a parameter of one of the halves to the assembly to show length of the hinge but I cannot set the BOM base qty on the assembly to that parameter so Inventor can add up the lengths.
When I group the items in a buyout parts list the result is "0." The individual assemblies show the correct length because I use the "length" parameter that is linked for the QTY in the parts list. But I cant "add" the lengths and have a total whe I group them.
I need to have mixed units in this list. Some things are bought as Each and these hinges are bought in length.
How can I perform head loss calculations with the new pressure network feature in C3D?
I would like to use C3D 2013 to calculate water distribution networks... Is it possible or should I export to EpaNEt?
Autocad Civil 3D 2013 - Infrastructure Design Suite
Windows 7 64 i7 860 @2.80GHz 8GB Ram Quadro 2000D
I have a customer who uses negative material mass in Inventor to calculate buoyancy for submerged constructions. After upgrading to 2013, we have a problem: Inventor 2013 does not accept negative material mass
View 3 Replies View RelatedI have a set of 8 coordinates that outline a pit. I have been asked to calculate it's volume. I have input the coordinates, and have produced a 3D image of the pit. I was hoping to be able to convert the object (the pit) that I have created to a solid, so I could then determine the volume, although it is proving to be difficult.
how I could calculate the volume of this pit?
I do a lot of township layouts and it is cumbersome to calculate each properties size and type in into an excel sheet. Is there a faster way to calculate all the stands's sizes into database?
View 1 Replies View RelatedI received a file that has a large number of blocks with unnamed blocks inside. I need them all to be by layer, and i really don't want to explode it.
How can I can do it?
We recently updated all of our software at my company from 2010 architectural desktop to 2013 autocad. We do a lot of architectural work where we use the "wall" functions to draw our floorplans. I have noticed that the walls are disappearing on some files and not on others. Or we will only be able to see the outside line of the wall, but not the interior, which results in an undesirable appearance to the floorplans.
I have also run across these error messages when opening the files, I dont know if they are related or not:
"Unhandled exception C0000005 (access violation reading 0xffffffff) at address E43AA180h"
and
"Unhandled exception C0000005 (access violation reading 0xffffffff) at address D41218AEh"
I'm trying to get a routine that creates and inserts a copy of all the block entities in a DWG. For some reason the code causes CAD to hang? See attachment for code.
View 6 Replies View RelatedLet's say I have a whole bunch of blocks, and they are all different colors. I want to make them all one color without having to go into the block editor screen for each one. there has to be a way.
View 9 Replies View RelatedI have about 100 blocks. They are different in many ways, but all have multiple linear distance parameters, and these have the distance max set to lengths (all of them have different lengths).
I'd like to be able to change the distance max without having to open each block and do this manually.
Is it possible to export block info into Excel and then change it in Excel, and reimport into AutoCAD, saving the new information?
Or is there another way, through Lisp or some other part of AutoCAD that I don't know about?
working with blocks, I want to be able to simple turn on and off certain layers of the blocks appropriate for the work I am doing at the time. However, no matter how I construct my blocks, on what layer i made them or insert them, I can only get one layer to turn on and off freely. Is there something I am missing with blocks to get it to work more smoothly?
Example... a door block with swing and frames. When you want to hatch a floor pattern, you have to click inside and outside the swing arc to hatch, and even then... there should be a line across the frame to close the opening... I just want to turn off the door and swing line, keeping the door frame and threshold line to make hatching easier.
I recently added 2 monitors to my set up to bring my total to 3. I am trying to figure out the best way to work on one drawing, with 2 differant veiws on each of the 2 main screens.
I would like my main screen to have the plan view and the second monitor to have an isometric veiw (or whatever I need at the time) of the same drawing. Is there a way to have the same drawing opened up in another window, in one session of Autocad 2013. One on the main screen and one on the secondary.
I've been working on some tooling and what I've run into is common block names being used in more than one tool.
I try to insert them into my layout and it shows multiple definitions that are duplicates but it ignores them as it continues to insert the new tool.
So then the tool is all messed up since it's trying to use the properties of the blocks from another tool.
Is there a batch routine or another simplier way to rename 40 or 50 blocks at one time?
This is happening in multiple tools and they are being generated by another customer so I can't just go talk to the guy and ask him to make a simple change.
Any way other than going into multiple tool files and changing each block name one at a time?
My coworkers are positive that they have been able to INSERT multiple blocks at one time but now when using the INSERT command, they can only select a single block for insertion. I tried recreating the issue and it does the same thing for me both using DESIGN CENTER and the INSERT command. Is there a setting somewhere that controls the number of blocks you can INSERT at one time or are they just delirious?
If it isn't possible to do in AutoCAD, then is there possibly a LISP routine out there that will achieve this?
I've been given about 14 DWGs from another company all on different discs. Each DWG is a page to a set of Shop Drawings. All objects are in model space. I want to combine all of them into one drawing but every drawing has similar block names with different objects associated with the block and when I copy the objects from one drawing to antoher, the blocks morph into the exisiting block, if that makes sense. Just a poor initial set up.
Anyway, the solution to this, I have found, is to rename the blocks in each drawing to have room numbers on the ends, giving them unique names and avoiding the "morph" upon inserting. I have about 15 blocks per drawings to add -XX with XX being 01-14. Is there an easy way to modify them or do I need to do the RENAME command as many times as needed in each drawing?
I have a dwg that is converted from vectorworks with 100+ blocks of different names. All line-weight and color is set to 0.00mm and white.
I want to be able to organize multiple Block into same layer so I can color them by layer and change visibility (hide/Lock) by layer. but when I select everything to organizes "by layer" only non-block line can be organized.
Is there a way I can change multiple block into same layer without exploding them?
I try:
1. select block and change layer in properties.
Failed.
2. "set to by layer"
Problem: layer of block is still not changed when open with reference edit.
So, while it wasn't common before, I am finding a need for multiple visibility states in blocks more and more these days, since AutoCAD can't do it I was wondering what work around and tricks people had come up with??
View 9 Replies View RelatedI have created a block with 3 different elements (A B C). This 3 elements are totally independents and they can be visible or invisible. Whit only one visibility parameters, there are 7 different visibility states:
xxC, xBx, xBC, Axx, AxC, ABx, ABC
If there are 4 or more elements there are too much possibilities.
I've tried to create 3 visibility parameters, but it's not possible.
¿How can i create independent visibility states for each different object in a block?
I am trying to create a dynamic block that allows me to insert a single rack into a drawing and make a single row of racking with all racks staying 9'-0" center of post to center of post. Also would like to be able to turn that one single row into a double row that spacing between rows can be modified. I have attached a cad file showing a single rack and two example, one of a row of double racks and one of a single row of racks. This rack is 48" deep i will also have to create this for a 60' deep rack so how i can create future rack sizes and rows.
View 1 Replies View Related
