AutoCad :: Multiple Layer Blocks
Jul 12, 2012
working with blocks, I want to be able to simple turn on and off certain layers of the blocks appropriate for the work I am doing at the time. However, no matter how I construct my blocks, on what layer i made them or insert them, I can only get one layer to turn on and off freely. Is there something I am missing with blocks to get it to work more smoothly?
Example... a door block with swing and frames. When you want to hatch a floor pattern, you have to click inside and outside the swing arc to hatch, and even then... there should be a line across the frame to close the opening... I just want to turn off the door and swing line, keeping the door frame and threshold line to make hatching easier.
View 3 Replies
ADVERTISEMENT
Nov 29, 2012
I have a dwg that is converted from vectorworks with 100+ blocks of different names. All line-weight and color is set to 0.00mm and white.
I want to be able to organize multiple Block into same layer so I can color them by layer and change visibility (hide/Lock) by layer. but when I select everything to organizes "by layer" only non-block line can be organized.
Is there a way I can change multiple block into same layer without exploding them?
I try:
1. select block and change layer in properties.
Failed.
2. "set to by layer"
Problem: layer of block is still not changed when open with reference edit.
View 3 Replies
View Related
Apr 24, 2012
I'm aware of the intricacies of layer zero, and the general rule-of-thumb to draw content inside of blocks on 0 so that the block takes on the properties of the layer it is inserted onto, can be isolated, etc.
I generally follow this rule, and where required, I change the line color inside of the block when I want to maintain a certain lineweight. (lineweights based on my plot settings for colors). My dilema is that i've got an intricate block. I'd like to be able to manipulate this block in a way that you'd isolate layers and change their properties. Is there any way to isolate a portion of lines inside of a block while still maintaining them either on layer zero or another (magical) sort of "transparent" layer?
As an example, i'll use the classic "existing", "proposed" door block. i'll draw the door, swing, and jamb all on layer zero. I will set the the swing portion red and dashed so that both existing and proposed swings appear the same. the door itself will then take on the properties of my existing and proposed door layers, respectively. Now say i'd like to edit my block. I want to isolate the swing portion and color it by layer. (obviously the example is lacking here since it would be easiest to just click on the arc) Can i group items inside of a block, or better yet, can i create a second layer and somehow edit the layer's properties so it is "dynamic", "transparent", or "magical" like layer 0?
View 3 Replies
View Related
Jun 1, 2012
I'm trying to get a routine that creates and inserts a copy of all the block entities in a DWG. For some reason the code causes CAD to hang? See attachment for code.
View 6 Replies
View Related
Apr 20, 2010
Let's say I have a whole bunch of blocks, and they are all different colors. I want to make them all one color without having to go into the block editor screen for each one. there has to be a way.
View 9 Replies
View Related
Mar 10, 2012
I have about 100 blocks. They are different in many ways, but all have multiple linear distance parameters, and these have the distance max set to lengths (all of them have different lengths).
I'd like to be able to change the distance max without having to open each block and do this manually.
Is it possible to export block info into Excel and then change it in Excel, and reimport into AutoCAD, saving the new information?
Or is there another way, through Lisp or some other part of AutoCAD that I don't know about?
View 0 Replies
View Related
Nov 1, 2011
I've been working on some tooling and what I've run into is common block names being used in more than one tool.
I try to insert them into my layout and it shows multiple definitions that are duplicates but it ignores them as it continues to insert the new tool.
So then the tool is all messed up since it's trying to use the properties of the blocks from another tool.
Is there a batch routine or another simplier way to rename 40 or 50 blocks at one time?
This is happening in multiple tools and they are being generated by another customer so I can't just go talk to the guy and ask him to make a simple change.
Any way other than going into multiple tool files and changing each block name one at a time?
View 8 Replies
View Related
Sep 5, 2012
My coworkers are positive that they have been able to INSERT multiple blocks at one time but now when using the INSERT command, they can only select a single block for insertion. I tried recreating the issue and it does the same thing for me both using DESIGN CENTER and the INSERT command. Is there a setting somewhere that controls the number of blocks you can INSERT at one time or are they just delirious?
If it isn't possible to do in AutoCAD, then is there possibly a LISP routine out there that will achieve this?
View 4 Replies
View Related
Aug 4, 2011
I've been given about 14 DWGs from another company all on different discs. Each DWG is a page to a set of Shop Drawings. All objects are in model space. I want to combine all of them into one drawing but every drawing has similar block names with different objects associated with the block and when I copy the objects from one drawing to antoher, the blocks morph into the exisiting block, if that makes sense. Just a poor initial set up.
Anyway, the solution to this, I have found, is to rename the blocks in each drawing to have room numbers on the ends, giving them unique names and avoiding the "morph" upon inserting. I have about 15 blocks per drawings to add -XX with XX being 01-14. Is there an easy way to modify them or do I need to do the RENAME command as many times as needed in each drawing?
View 4 Replies
View Related
Jul 1, 2013
What is the general feeling about building blocks on layer 0 then using the layer controls to change the colors etc. after they are dropped into a particular layer?
In other words, I like to build a block labled "sample location" on layer 0 then depending on the layer it is placed in, it can be either red or blue (based on the test results).
I print out my drawings on letter sized paper in color.
Most of the time, my background image is a monochrome or greyscale tiff or a jpeg of a scanned in drawing.
Sometimes I will get a nice cad file to work with. with these drawings, I turn off all the extraneous layers that i don't need, and reset the layer colors to black and white. Often, though, the doors and windows are blocks on separate layers that I have to then modify to change the colors.
View 9 Replies
View Related
Aug 29, 2011
So, while it wasn't common before, I am finding a need for multiple visibility states in blocks more and more these days, since AutoCAD can't do it I was wondering what work around and tricks people had come up with??
View 9 Replies
View Related
Nov 15, 2013
It inserts the first block and then quits. I had to change the the file to a txt to get it to upload
View 6 Replies
View Related
Apr 2, 2007
I have created a block with 3 different elements (A B C). This 3 elements are totally independents and they can be visible or invisible. Whit only one visibility parameters, there are 7 different visibility states:
xxC, xBx, xBC, Axx, AxC, ABx, ABC
If there are 4 or more elements there are too much possibilities.
I've tried to create 3 visibility parameters, but it's not possible.
¿How can i create independent visibility states for each different object in a block?
View 9 Replies
View Related
Apr 23, 2013
I am trying to create a dynamic block that allows me to insert a single rack into a drawing and make a single row of racking with all racks staying 9'-0" center of post to center of post. Also would like to be able to turn that one single row into a double row that spacing between rows can be modified. I have attached a cad file showing a single rack and two example, one of a row of double racks and one of a single row of racks. This rack is 48" deep i will also have to create this for a 60' deep rack so how i can create future rack sizes and rows.
View 1 Replies
View Related
Dec 3, 2012
I was inserting blocks. I was trying to insert more than one block at the same time. If I have to insert each block every single time, that's just so slow. There must be another way to make it easier to bring up more than one block at the same time.
I am using both Mac version and windows version of AutoCAD. In the mac version, when tried to open up block editor, for some reason, it says the BLOCKEDITOR = 0 (read only). I couldn't even get into block editor to make changes for my block.
View 3 Replies
View Related
Nov 18, 2012
If we want to change the color of a block we have to open block editor and change the color from there.
If in a design we have 100 blocks and we want to change their color to the same (say black), how can we do that? Do we have to do it for every single block or can we select all 100 blocks and change the color uniformly?
View 3 Replies
View Related
Jul 24, 2012
Are there any working .arx files or lisp routines that would enable me to calculate a total length of multiple blocks ? I know there is TLEN out there but this does't work for blocks, I need something that will calc combined lenghts of my user defined blocks which are basically simple lines of varying lenghts.
View 5 Replies
View Related
May 12, 2011
I have a schedule on a drawing and they used blocks for all the text. I want to change all the letters to uppercase.
View 4 Replies
View Related
Feb 13, 2011
I have a CAD file with property parcels in it. It has come from an external contractor and from a GIS program of sort sort I believe.
If you click each 'boundary'/land piece, it is a block/object (not a proxy graphic) and in the properties pane window, there are attributes that has the lot number, the lot area, parcel number, other info etc in it.
Each block is irregular and different, i.e. they are not all the same rectangle block repopulated, they are different blocks.
I don't know much about attributes in AutoCad althoguh after reading about them, is there some way to edit an attribute (make it not 'invisible' and to increase the text size of its display) when it is already in several hundred different blocks? The only way I could work out how to do it was to go into every block and do it.
I also tried using the ATTSYNC command to update blocks with attributes although that requires me to individually select each block/give each blocks name.
I also tried using the DATA EXTRACTION wizard and was able to extract the attributes into a table/excel file, although that is not really good enough as I need the attributes displayed over the CAD data so you can see what parcel of land the attributes are referring to.
Any better way or a lisp command to do this? Clicking each block/boundary/land unit to place a label over it would also be okay. I just don't want to have to manually create the labels from reading the property pane, there must surely be a better way,
View 9 Replies
View Related
Oct 18, 2012
See the dwg attached.
I'd like to modify a dynamic door block I've created so that I can stretch by door leaf size OR structural opening size, but I'm not sure how to do this.
Incidentally, I think the block has some flaws:
- I think the 'center/flip point' is not exactly in the center!
- The frame size should be 40mm, not 32mm
- The packing zone should be 30mm, not 6.38mm!
View 8 Replies
View Related
Jun 24, 2013
Imagine a layer containing 10 squares, each square is isolated (none are touching). I need a quick way to put each of those squares on its own layer. Is there something already built in, or any plugin or action?
View 12 Replies
View Related
Aug 15, 2011
My script in VBA works perfect. Now i try to do the same with NET, but nothing happens. Here is the
Public Function CreateSelectionSet(ByVal SelectionSet As AcadSelectionSet, _
ByVal FilterCode As Integer, _ ByVal FilterValue As String) As Boolean
Dim iFilterCode(0) As Integer Dim vFilterValue(0) As Object
iFilterCode(0) = FilterCode vFilterValue(0) = FilterValue
[Code] .....
I can select something, but nothing happens... Where is the error?
View 8 Replies
View Related
Jun 22, 2011
How do I assign the blocks coming in from Architect's drawing (Partition Panels - about 50+ styles and each style is a different block) to a different layer along with those layer properties without having to explode & re-define?
I want to keep them as blocks but for uploading to a IWMS system which will only recognize certain layer names. They are changing over to the layer name I select, but their properties are not (example: color)
View 3 Replies
View Related
Mar 1, 2013
Many of the blocks my company uses were created with the linework within the block on Layer 0, and set to ByLayer.
When I insert it into a drawing, I put the block on a layer other than 0, and use that layer to control the color & linetype.
If I Xref a drawing, and want to turn off or freeze a layer I use the Freeze and Off buttons in the layers section of the ribbon (I'm working in 2012). This way, I don't have to figure out what layer an object is on to turn it off.
Here's the problem: When I try to freeze or turn off a layer by clicking on a block, it doesn't do anything to the layer that the block is on. It tries to effect layer 0. Even if I use the list command to find out what layer an object is on, it says it's on 0.
I found this article that seems to explain how to use layer 0 in blocks: [URL] ....
It seems my company is doing things exactly as that writer recommends. But it still seems incredibly faulty.
What is the best way to design and work with blocks? I always try to avoid using layer 0, but that would waste a lot of time trying to override the company standards.
View 4 Replies
View Related
Aug 15, 2012
I've been asked to create some plots of vector arrows showing the results from water current metres, ie each data point has a position (x and y only), direction and a velocity.
I have created a dynamic block to handle the vector data (a simple arrow with a stretch and rotate controls)
What I need now is to somehow read in the values for each block from an excel spreadsheet or txt file?
Windows 7 x64
32GB RAM
Xeon E5420 @2.50GHz
3DS MAX 2014
Civil 3D 2014
View 1 Replies
View Related
Jul 3, 2012
What I am trying to do is create a selection set of blocks with the same name. Then step through the selection set and if the block has an attribute "Tag" with a Specific "Value" then get the insert point.
View 2 Replies
View Related
Aug 2, 2013
I am designing a solar field and have my solar panels laid out in a grid. I have each panel represented as a block with 4 attributes: Column, Row, Module Type, and Combiner Box. There are ~5,000 panels so it will take forever to modify the attributes of each block individually. Is there a way I can select multiple blocks (an entire column for instance) and set the "Column" attribute for ALL of those blocks to the appropriate value?
My end goal is to be able to export the information in those blocks to excel. So if there is any way to tie 4 pieces of information to an object and export it into excel not using block attributes, that would work for me as well.
I attempted to use Lee Mac's Batch Attribute Editor BAtteV1-4.lsp and it was very close to what I needed. But it will modify the specified attribute of all blocks within a drawing, whereas I only want to modify the attributes of all blocks within a selection.
View 3 Replies
View Related
Nov 7, 2013
How to (annotate / match orientation) for multiple blocks in the one go ?
I have to alter blocks with alomst every survey dwg I receive whilst at work. Just wondering if there is a quick way to do all blocks in the one go !
View 4 Replies
View Related
Sep 28, 2012
It seems like this should be easy but it's not. I have a block with multiple components. I want them to array sequentially as I drag the grip. First one component, then the next, then the next. What I get is all 3 at once when I drag the grip far enough. I tried 3 separate linear parameters with their grips stacked but that didnt work either. What I have attached is a very simplified version of what I want, but I think once I get the concept it will be easy to elaborate on.
View 9 Replies
View Related
Oct 12, 2012
i create multible blocks (min. 100 blocks in diffrent name) with Diffrent hatches in that block....
i want to change the scale in all diffrent hatches.. in all block...
i want any lisp....
View 4 Replies
View Related
Mar 22, 2013
I'am trying to create a block that has 3 components that can change
1- crane model or base
2- crane boom has different lengths and needs to rotate at pivot point
3- crane jib has different length and offsets from the crane boom
You can do this in one block or do you need to have 3 separate blocks and just piece together?
View 2 Replies
View Related
