AutoCad :: Joining Two Lines / Plines Into One?
Mar 9, 2012im after to join two lines into one line. ive got a rad of 10mm then a straight line.
dxf as shown, im using Lt
ADVERTISEMENT
AutoCad 3D :: Converting DXF Lines Into Plines?
Jul 1, 2013So, I am trying to output a solid 3D model of the attached drawing. I traced it and converted it into a dxf, from there I cleaned it up, but cannot pedit. I assume it has to do with the arcs. Cannot find anything on google, so I thought I would turn to you good folks.
[URL]
AutoCAD 2010 :: Fillet PLines Keeps Original Lines
Dec 13, 2012I am attempting to fillet plines to make rounded curbs at street intersections. Whenever I create the fillet, the 2 plines that were filleted remain as they were before the fillet.
This only happens on my computer and only in AutoCAD 2011, it works fine in Civil3D 2011. We only have a limited number of Civil3D licenses or I would just use that all the time.
The attached screenshot shows an example of what happens. The 2 red lines are what were filletted (the fillet is in white). Both lines are long enough to accomodate the radius of the fillet.
What is causing this problem?
AutoCad :: Converting Multiple Lines / Arcs Into Plines?
Oct 18, 2011I've been trying to figure out how to do this. I have a file with 41 drawings, and 7650 objects. and i want all the lines, arcs and circles to be turned into polylines. Now the Mpedit command doesnt really do it for me.
Command: MPEdit
Select objects: Specify opposite corner: 4632 found, 10 groups
Select objects:
divide by zero
This is what happens when i write MPEdit, mark everything in my drawing and press enter. Now i also tried marking a line, using select similar, and fixing it that way. but i get the "divide by zero" error aswell.
AutoCAD Visual LISP / AutoLISP :: Set All Lines And Plines Scale To 1
Jul 15, 2013I am working on a script. I need to select all lines and polylines and set there linetype scale to 1.
I'd take a simple lisp routine if that would be easier.
AutoCAD Visual LISP / AutoLISP :: Select Lines / Plines That Intersect Given Pline
Sep 13, 2012I need to change the color of all lines/plines that intersect a given pline. How would I go about making the selection set of all lines that intersect that given pline.
View 8 Replies View RelatedAutoCad :: Joining Lines Into Polylines
Oct 18, 2011Joining lines into polylines in autocad 2007. Basically, I got stuck when joining several lines together using PEDIT and then Join. At the start, it was very smooth process with no drama. Then, I came across two polylines and wanted to join them together, it just did not work. It works most of the time. Why I can't join certain lines together or two polylines together. This is a 2D drawing CAD.
View 3 Replies View RelatedAutoCad 2D :: Lines Joining When Filleting
Oct 6, 2013Sometimes when I am filleting lines they end up joining together like a Polyline. Is there a setting I can turn off that will not allow lines to join when filleting?
View 3 Replies View RelatedAutoCAD 2010 :: Joining Lines To Become A Polyline?
Mar 20, 2012Normally i Join lines and fillets to become a polyline and no problems
But sometimes when i Join them it turns them into a Spline which i dont want.
Then i have to convert it into a polyline and it then it adds load of points/grips on the line which i dont want.
Is there a setting that stops the lines converting to a spline
AutoCad :: Joining Objects Without Losing Lines?
Feb 6, 2012Im creating plans for a new entryway and so that I have some perspective on how it will all join together i'm also creating a 3d model of my entry idea. In order to move things around to get a better view of how im planning on building this entry, I joined studs together so that I can move things around in the viewport without having to select each object. I know I can grab all the objects at the same time to move but I was wondering IF there is a way to union objects so that they dont lose the lines between joining objects. For example if 2 - 2x8 studs are next to each other and I were to union them, then they would plot as a 4 x 8 instead of 2 - 2 x 8's OR is there a way to maintain lines after union?
View 2 Replies View RelatedAutoCAD Inventor :: Joining Two Lines (Straight And Fillet)
Apr 16, 2013I have searched the discussion groep and have not came up with any usefull information.
I have an inside web plate sketch that i want to offset but my offset does only do one line at a time.
So my problem basicly is that I want it to do the whole sketch in one click. Is it possible to join all the lines? or is there another function that I do not know of that will do this for me.
Attached is photos of the problem I have
1 picture - How do I join these lines
2 picture - How the whole sketch looks
3 picture - The offset does only do one line at a time (i want it to do the whole sketch)
AutoCad :: Joining Lines / Ellipse Arcs And Circle Arc?
Jul 13, 2007 how to join line or polylines with ellipse arcs or circle arcs and now.. I give up! Here is my problem: What I would like to draw can be compared with a pear: a succession of circle arcs ellipse arcs and maybe polylines. Once the profile done, I was planning to use REVOLVE or (EXTRUDE + FLLET) to finish my drawing... the problem is that I can't join 2 ellipse arcs from different ellipses (which means neither with a circle arc. How would you proceed to draw a pear?
PS: I'm using autoCAD 2006 z.54.10 version
AutoCAD 2010 :: Joining Lines After Using Break Command?
Mar 30, 2012I used the "break" command to split some lines into segments, but now I can not join them again using PEDIT. They are all on the same elevation. What is preventing me from joining them? I've attached the file in question, I'm trying to join the red (metal layer) lines.
View 3 Replies View RelatedAutoCAD 2013 :: Using Join Icon Versus Joining Lines In Pedit Command
Oct 6, 2013what is the difference btwn using the join icon and joining lines using the pedit command?
View 5 Replies View RelatedIllustrator :: Joining Two Lines Endpoint Together
Apr 23, 2013How do I join two line endpoint together, which terminate at the same anchor point and are at a 90 degree angle, to form a corner instead of a stair step? My problem is on the left, and I want it to look like the right corner.
View 4 Replies View RelatedCorelDRAW X5 :: Joining Dashed / Dotted Lines
Apr 17, 2012When I join 2 lines that are dashed (or dotted, I don't know which is the correct name) there's no "corner". See picture below. In one of the corners the lines doesn't meet. In the other there's a "cut-out".
View 14 Replies View RelatedPhotoshop :: Joining Lines In Illustrator, Not Through Endpoints
Mar 11, 2005Is there a way to join two lines through anchor points and not endpoints? Simple example would be to create a 'T' object by joining two lines.
View 2 Replies View RelatedXara :: Joining 2 Lines Together And Retain Original Paths
Sep 6, 2011I wanted to join 2 lines together (i.e. end up with a single line). I know that you can join lines by selecting both then using any of the shape / line / brush tools to drag one node from line A over to the a node on line B (you get a little + symbol next to the mouse cursor once the lines can join).
This is fine is you want the final line shape to differ from the original 2, but what if you want to join 2 lines and retain the original paths?
I can do it by postioning the target nodes on eash of the lines almost but not quite touching then using the above technique but its a bit awkward and I suspect this isn't the best way to go about it.
AutoCAD LT :: Plines Not On A Layer
Aug 13, 2013I have these plines that keep appearing in my drawing that are not on a layer (see attached). I have never experienced this before. There are 10x duplicates stacked upon one another surrounding three separate shapes. My theory is that a hatch is creating them. I deleted them and they came back. How do I manage them and their display properties, or better yet, remove them from the drawing.
-----
AutoCAD LT 2011
AutoCAD Civil 3D 2012
AutoCAD 2010 :: Sections From 3D Plines
May 20, 2012I have a 3d topographic survey plan. I need to take sections at various locations and would like to know the best way of going about this.
I am used to working with solids and so would normally just take a section plane but this won't work as the 3d topographic survey plan I have is made up of polylines.
AutoCAD 2013 :: Can't Join Plines
Aug 20, 2013A new problem; I can't join these plines. I have tried just 2, selecting them before entering the command but nothing happens. I need the selected line joined with the one on each end that shares that node.
View 9 Replies View RelatedAutoCad :: Adding Lengths Of Plines
Sep 30, 2013How i'm adding lengths of individual plines...I am running MEP 2013 and lately we've been doing a lot of measuring of plines...The problem i'm having is that we are supposed to add 24' to every length...So if I measure a polyline and it's 10' long, the number i'm supposed to be putting on the drawing would be 34'...Is there a way to create a command that will automatically add what I need to every pline?
View 9 Replies View RelatedAutoCAD VB :: Hatching Multiple Plines
Feb 21, 2012I have got a recordset that contains a bunch of ehandles for closed plines. Currently I cycle through the recordset, change each ehandle to an oblject and hatch it. It works fine, but is a tad slow. I would like to put all of the ehandles into a selectiion set (maybe?) and hatch them all at one time.
View 4 Replies View RelatedAutoCAD 2010 :: Convert Plines To Splines?
Mar 15, 2012I searched and saw lots of posts on converting a spline object into a pline, but not the other way around. I like the way that splines can use control vertices or fit points.
I know that you can apply a spline smoothing to a pline, but what I'd like to do is to convert a pline object into a spline object and splining a pline does not do that.
Any fairly easy way to do this? Are there LISP routines that do this?
AutoCAD 2013 :: Plines Using On Drawing Do Not Appear Solid
Aug 13, 2013The Plines that I am using on my drawing do not appear solid when I change to the required global width, all my system variable are set correctly however the lines are showing 'doubled'. How do I rectify this?
AutoCAD 2013 Mechanical SP2
64-bit HP Z400, Intel Xeon W3550 3.07GHz
12.0GB RAM, ATI FirePro V4800 (FireGL)
Windows 7 HP Z400, Intel Xeon W3550 3.07GHz
12.0GB RAM, ATI FirePro V4800 (FireGL)
AutoCAD Architecture :: Generate Roofs Based On Plines
Dec 10, 2012Is there a way to generate a roof based from plines? Like this but without tracing? I need to generate multiple roofs at once with the same slope ect.
View 9 Replies View RelatedAutoCAD 2010 :: Generate Roofs Based On Plines
Dec 10, 2012Is there a way to generate a roof based from plines? Like this but without tracing? I need to generate multiple roofs at once with the same slope ect.
View 9 Replies View RelatedAutoCAD 2013 :: Multi Select PLines With Similar Dims
Aug 3, 2012I have several rectangles in a drawing which have the same dimensions, is it possible to perform a multi select of these items by specifying the lenghts of the rectangles ? I can't see a way of doing this under QSelect or Filter.
Autodesk Inventor Professional 2013 SP2 64-Bit Edition
Windows 7 HP Z400, Intel Xeon W3550 3.07GHz
12.0GB RAM, ATI FirePro V4800 (FireGL)
AutoCAD Civil 3D :: Make 2D Plines Take On Elevations Of Points At Their Vertices?
May 9, 2012I know there are different ways to do this. Would like to know multiple options so I can see which might be quickest for me.
I have points with elevations and 2D plines at elevation zero drawn between them.
I would like 3D plines instead. This is the easiest way for me to transfer them to another drawing where I will make surfaces with them. I don't want to have to transfer the points over.
I can redraw the plines as 3D plines but this is time consuming and seems unecessary.
I don't want to have to convert them to Feature Lines either. I prefer they be 3D polylines.
Is there a simple command for this? I already have a surface containing the points and lines as surface breaklines.
Is there a project objects to surface command that will make these 2D plines at elev 0 into 3D plines while assigning elevations (and vertices) only at the current vertices?
What about a simple series of commands to convert the 2D plines to 3D plines, then force the 3D pline to take on the elevations of the points at its vertices? (I think this would be my preference, but don't know any of these commands or where to find them.)
AutoCAD 2010 :: How PLines Show Up At Intersections When Width Increased
Mar 15, 2012Didn't their use to be a control for how PLines showed up at intersections when you increased the width? I can't remember where it was (dialog box, options, sys-var)?
View 5 Replies View RelatedAutoCAD Visual LISP / AutoLISP :: How To Create Some Plines In A Drawing
Sep 10, 2013I have to create some plines in a drawing from the inputs provided by the client. I prepared a lisp code for it. I have to use it to 1000 drawings. Every time I open the drawing and running the lisp command.
Is any lisp code to run in bulk open drawings with out entering command prompt.
