So, I am trying to output a solid 3D model of the attached drawing. I traced it and converted it into a dxf, from there I cleaned it up, but cannot pedit. I assume it has to do with the arcs. Cannot find anything on google, so I thought I would turn to you good folks.
[URL]
I've been trying to figure out how to do this. I have a file with 41 drawings, and 7650 objects. and i want all the lines, arcs and circles to be turned into polylines. Now the Mpedit command doesnt really do it for me.
Command: MPEdit
Select objects: Specify opposite corner: 4632 found, 10 groups
Select objects:
divide by zero
This is what happens when i write MPEdit, mark everything in my drawing and press enter. Now i also tried marking a line, using select similar, and fixing it that way. but i get the "divide by zero" error aswell.
im after to join two lines into one line. ive got a rad of 10mm then a straight line.
dxf as shown, im using Lt
I am attempting to fillet plines to make rounded curbs at street intersections. Whenever I create the fillet, the 2 plines that were filleted remain as they were before the fillet.
This only happens on my computer and only in AutoCAD 2011, it works fine in Civil3D 2011. We only have a limited number of Civil3D licenses or I would just use that all the time.
The attached screenshot shows an example of what happens. The 2 red lines are what were filletted (the fillet is in white). Both lines are long enough to accomodate the radius of the fillet.
What is causing this problem?
I am working on a script. I need to select all lines and polylines and set there linetype scale to 1.
I'd take a simple lisp routine if that would be easier.
I need to change the color of all lines/plines that intersect a given pline. How would I go about making the selection set of all lines that intersect that given pline.
View 8 Replies View RelatedWhether it is possible to convert text into lines.
I need the text to be part of the surface for when being fabricated.
i was wondering if there is a way to convert multiple lines (non collinear) into polylines?
this to be able to add the "global width" property to the objects.
How to convert a 3'-6" radius 4" OD single line 90 deg turn int a solid cylinder (90 deg elbow pipe fitting).
View 2 Replies View RelatedI'm currently working with some vectorial cartoonish drawings, and while it's mostly quite easy, I'm having problems with disconnected lines. At the end of a disconnected line it needs to gradually get thinner and end in a small, rounded off point. It needs to to become thinner much slower than the normal rounded-off point, kind of a sharpenned edge effect.
So far the only method I could manage is making a shape instead of a line, but it's much harder to work whenever I want to change something, since I have to rework node by node. So I was wondering if there was a way to convert a line into a shape, so I can modify it all I want as a line, and then turn it into a shape and add the sharpened end.
I've placed about a dozen guide lines on a blank document but now need to actually "see" those guidelines in the actual print for cutting purposes. is there a way to "convert" them from invisible to visible?
View 6 Replies View RelatedHow to remove vertical lines appearing on a Word File with Gimp-cropped cartoons (saved as jpeg and attached to the Word file) when it is uploaded to Kindle?
The Word file is pristine with the Gimp images (saved as jpeg. Only the cartoon appears. When I upload it onto Kindle these vertical and sometimes horizontal black lines appear on the image's edge? What can be causing this and how do I remove them.
I've imported a logo to Corel Draw. The logo has several simple polylines. I'd like to convert them into artistic media in order to simulate calligraphic or hand made looking strokes. I pick the polyline, then I select Artistic Media from Effects menu. Then CD shows me the Default Strokes in a side docker window. I select any stroke.
The polyline changes, but I can't modify the stroke width spinner. Is there another method to convert lines to artistic media without redraw them over.
I am working with files in which I have to apply a layer that a subsequent program then will use for "HOTSPOTTING" on a web based purchase platform.
The files I am working with is .dwg files and .pdf But the objects I want to hotspot is not recognized as text. Is there a way where I can force illustrator to accept the marked area as text?
I converted a PDF-file (PDF/X-1a) into a Photoshop file using Photoshop CC and got fine lines over the picture.
Using Photoshop CS5, those lines will not appear.
MGD 64 lemonade to forum.cdr
This isn't something I am in need of because in the future with this graphic I would just convert the background. Just wondering why it made those odd lines coming off of the words and the black bar (I don't know how the heck you guys can post large things, things with motion, etc. I have to make things miniature to put them on here)
I assume it has something to do with how the original, that came from MillerCoors, has those layers of lines in it. I just don't get why lines would then be visible when I changed it since nothing like that has happened before. Oh, and if you are wondering why I converted it, it's because I knew my rip server wouldn't like all that stuff going on in the original
I scanned my signature into my computer as a TIFF file. I then edited and cleaned it up in Photoshop. Then I placed it into Illustrator and turned it into a Vector file. The problem with this though is that there are vector paths around the perimeter of the signature and not down the middle of the letter strokes as would be if I had made it in Illustrator. Is there a way that I can still make this happen?
I just converted it back to a tiff file becuas the vector lines were turning into double lines in places. I just enlarged them enough that it hid any gaps and then converted it into a tiff file to have another try at it. Would much rather work with one line though.
I have these plines that keep appearing in my drawing that are not on a layer (see attached). I have never experienced this before. There are 10x duplicates stacked upon one another surrounding three separate shapes. My theory is that a hatch is creating them. I deleted them and they came back. How do I manage them and their display properties, or better yet, remove them from the drawing.
-----
AutoCAD LT 2011
AutoCAD Civil 3D 2012
I have a 3d topographic survey plan. I need to take sections at various locations and would like to know the best way of going about this.
I am used to working with solids and so would normally just take a section plane but this won't work as the 3d topographic survey plan I have is made up of polylines.
A new problem; I can't join these plines. I have tried just 2, selecting them before entering the command but nothing happens. I need the selected line joined with the one on each end that shares that node.
View 9 Replies View RelatedHow i'm adding lengths of individual plines...I am running MEP 2013 and lately we've been doing a lot of measuring of plines...The problem i'm having is that we are supposed to add 24' to every length...So if I measure a polyline and it's 10' long, the number i'm supposed to be putting on the drawing would be 34'...Is there a way to create a command that will automatically add what I need to every pline?
View 9 Replies View RelatedI have got a recordset that contains a bunch of ehandles for closed plines. Currently I cycle through the recordset, change each ehandle to an oblject and hatch it. It works fine, but is a tad slow. I would like to put all of the ehandles into a selectiion set (maybe?) and hatch them all at one time.
View 4 Replies View RelatedI searched and saw lots of posts on converting a spline object into a pline, but not the other way around. I like the way that splines can use control vertices or fit points.
I know that you can apply a spline smoothing to a pline, but what I'd like to do is to convert a pline object into a spline object and splining a pline does not do that.
Any fairly easy way to do this? Are there LISP routines that do this?
The Plines that I am using on my drawing do not appear solid when I change to the required global width, all my system variable are set correctly however the lines are showing 'doubled'. How do I rectify this?
AutoCAD 2013 Mechanical SP2
64-bit HP Z400, Intel Xeon W3550 3.07GHz
12.0GB RAM, ATI FirePro V4800 (FireGL)
Windows 7 HP Z400, Intel Xeon W3550 3.07GHz
12.0GB RAM, ATI FirePro V4800 (FireGL)
Whenever I use the Trace option to convert, the result is an image filled with closed objects. Because I use vector images with a laser machine, and because the laser cuts everything it reads, the "double" lines (shared lines of the objects) get cut as many times as they appear. So I have to go in and break apart and delete segments & this goes on for days. I've tried welding, but welding makes one of the objects disappear completely. I've tried changing from cdr to svg, exporting & importing, hoping it would simplify, but that doesn't work either. Is there a way to have the bitmap converted to simple lines instead of overlapping objects?
View 9 Replies View RelatedIs there a way to generate a roof based from plines? Like this but without tracing? I need to generate multiple roofs at once with the same slope ect.
View 9 Replies View RelatedIs there a way to generate a roof based from plines? Like this but without tracing? I need to generate multiple roofs at once with the same slope ect.
View 9 Replies View RelatedI have several rectangles in a drawing which have the same dimensions, is it possible to perform a multi select of these items by specifying the lenghts of the rectangles ? I can't see a way of doing this under QSelect or Filter.
Autodesk Inventor Professional 2013 SP2 64-Bit Edition
Windows 7 HP Z400, Intel Xeon W3550 3.07GHz
12.0GB RAM, ATI FirePro V4800 (FireGL)
I know there are different ways to do this. Would like to know multiple options so I can see which might be quickest for me.
I have points with elevations and 2D plines at elevation zero drawn between them.
I would like 3D plines instead. This is the easiest way for me to transfer them to another drawing where I will make surfaces with them. I don't want to have to transfer the points over.
I can redraw the plines as 3D plines but this is time consuming and seems unecessary.
I don't want to have to convert them to Feature Lines either. I prefer they be 3D polylines.
Is there a simple command for this? I already have a surface containing the points and lines as surface breaklines.
Is there a project objects to surface command that will make these 2D plines at elev 0 into 3D plines while assigning elevations (and vertices) only at the current vertices?
What about a simple series of commands to convert the 2D plines to 3D plines, then force the 3D pline to take on the elevations of the points at its vertices? (I think this would be my preference, but don't know any of these commands or where to find them.)
Didn't their use to be a control for how PLines showed up at intersections when you increased the width? I can't remember where it was (dialog box, options, sys-var)?
View 5 Replies View RelatedI have to create some plines in a drawing from the inputs provided by the client. I prepared a lisp code for it. I have to use it to 1000 drawings. Every time I open the drawing and running the lisp command.
Is any lisp code to run in bulk open drawings with out entering command prompt.