If there is a way to force the dimension of a line or circle or anything.
For example: If I draw a line and dimension it, it will dimension it to 2.973 let's say, but if I want to change the dimension or the line to 3.300, how would I do that?
Also, after you create a 2D drawing, is there a way to make it a 3D model or extrude the model?
Is there a variable to force dimension text line to show? I am using annotative dimensions and the placement for the text is forced to the outside of the dimension if it doesn't fit. I get annoyed on having to move the text to show the dimline above the dimension.
View 3 Replies View RelatedI am trying to make a intercept point with dimension between a line and a circle and i can't figure out how to do it.
View 2 Replies View RelatedI would liketho know how it is done / is there a command for that, lisp.
View 1 Replies View RelatedI need to find the center of a circle that is tangent to another circle and a point on a line. I cannot use tangent tangent radius.
View 4 Replies View RelatedHow does one programmatically set the command line to have keyboard focus?
I'm programmatically setting an active/focused PaletteSet's visibility to false.
_paletteSet.Visible = false;
I would like to follow this line with code that sets the command line to receive focus.
The PaletteSet for other reasons has KeepFocus = true.
I've tried various Win32 APIs (SwitchToThisWindow, SetForegroundWindow, SetActiveWindow) to no avail. I also tried SendCommand() and SendStringToExecute(activate=true,..) , etc.
I imagine there's a way to do this with the native APIs.
How can I avoid getting zeros when creating dimension line with quick dimension command. the Zeros indicates the line itself. how it can be avoided?
View 5 Replies View RelatedI want to insert dimension lines on this project. But instead of having an actual dimension I'd like it just to be a letter that refers back to a chart of possible dimensions for that element. How do I do this? I'm using AutoCad Architecture 2012.
View 1 Replies View RelatedCan i change the length of the dimension line 'extension' when my dimension text placement is beside the dimension line (see attached image)?dim line length.jpg
View 6 Replies View RelatedWhen doing an angle dimension and trying to put text under the dimension line, the text types out straight which if long enough will extend over the dimension line. Other then creating text with arctext, is there no other way to get it curved? I am using AutoCAD 2010.
View 3 Replies View Relatedmy normal dimension style has text above dmension line & I want to add 'typical' to it below dimension line.
I have done this lot of time in my previous job an year back. but I can't seem to remember what to type between dimension text & the word I want to add in edit text box, so that it appers below dimension line.
my 2014 inventor crashed and since then when I try to dimension a circle, I get a small "half circle" icon and it dimensions the half circle instead of a diameter or radius. Is there a setting that has changed when I crashed? I cant right click to get any dimension options.
It seems that the diamter dimension works on other things. the part im trying to dimension is a frame generator part. I have dimensioned off of these with no problem.
Dell t1500 i7 8 gb ram
Windows 7 64 bit
ati firepro v4800
I am not able to dimension to a circle edge when adding a sketch to existing feature of part. It works fine when it is the first sketch of the part file, but not when it is a child sketch. I've attached images of both situations. This has been verified on two machines, one is Inventor 2013, the other is Inventor Pro 2013, SP 1.1. The feature that I am trying to sketch on is the face of a contour roll.
View 8 Replies View RelatedI'm having a dimensioning problem, and it doesn't seem to matter if it something I have created or something a customer has sent to me.
When I attempt to dimension a circle, I get the following error message:
Select arc or circle: Object selected is not an arc, circle or polyline arc segment.
A few days back, I got this error message, and when I came in the next morning, I was able to dimension the circle.
Windows 7 SP 1
64 Bit.
Inventor 2013
ACAD Mechanical 2013
I am trying to apply dimension constraint for circle to add the radius dimension.
I have given the dimension location text point as input, but it doesn't take input location point to place the dimension and places the dimension at the center of circle. Please see the attached snap "CircleWithRadius.png".
Here is the sample
//===============================
CComPtr<Point2d> point2D;
TransientGeometry::CreatePoint2d(5, 5, &point2D);
CComPtr<SketchPoint> sketchPoint = SketchPoints::MethodAdd(point2D, FALSE);
CComPtr<SketchCircle> sketchCircle = SketchCircles::MethodAddByCenterRadius(sketchPoint, 3);
[Code] ........
Why the circle entity always place the radius at the center of circle?
I am having an issue with my dimensions. If I have a dimension that is 1'-3" or larger, my extension line beyond my dimension line extends the normal length, but as soon as my dimension goes under 1'-3", the extension line then gets twice as long outside of the dimension line (see attachment). I have researched...and i can't seem to find a dim variable that will let me change this. is there anything to control this happening once my dimension goes below 1'-3"?
View 1 Replies View RelatedOctagon inside a circle... The circle cannot be dimensioned off the octagon?
I need it to have, say .25" clearance and I mean I can just make the circle the right size... but Inventor/I really should be able to do something this simple...
A circle inside a circle, same center point, you can click both and get the distance between the two?
(R-click and set circle to Radius does nothing, it still wants to dimension it from the center point)
is it possible to have a dimension style setup that shows the dimension text inline with the dimension - without having to move it?I have been looking but cannot seem to do it - is it possible and I am just missing it?
View 1 Replies View Relatedhow to dimension from one circle center to another ("A" in the picture)? Or the angle between two circles ("B" in the picture)? My main problem is that i cant snap to a circle center with any dimension type except for diameter and radius, and then i can only dimension one circle on its own.
View 3 Replies View Relatedhow to make a circle a defined dimension. i.e. 153px X 153px.
View 3 Replies View RelatedAccording to the tool pallet instructions, I should be able to draw a circle of specific diameter by typing in the "width" dimension, then, according to Illustrator: "you can click on the word Height to copy that value into the Height box." Doesn't work. I've trashed the AI prefs, clicked on the word and on the field, and this simply doesn't work. I assume that I or my system is at fault.
View 2 Replies View RelatedI have a little problem with trim in autocad 2012. After trimming some lines that cut through a circle there's a big gap between the circle and line, so there's no way i can create a polyline. How do I fix it?
here is the figure w/o trimming
pic1.png
Here it is after trimming
pic2.png
And as you can see there is space between the lines. How can I get the line to connect to the circle?
pic 3.png
I am trying to draw the part as shown in attachment. I started off with the base rectangle whose dimensions are 120 * 42. After zooming out completely, it's still too big and takes the entire screen space. If I draw the rectangle and scale it, say by .5, would I have to scale every other line/circle that I draw from there on individually? Or is there a more efficient way to do this?
View 4 Replies View RelatedI would like to know how to make something like what I attach below.Its a circle with radius 112, touching a point on the corner, and the circle must touch some point on the line above precisely.
View 5 Replies View RelatedI am trying to make a circle perpendicular (at its midpoint) to the end of a cylindrical helix in 3D space. I tried using the perpendicular geometric constraint but it won't let me (says "invalid selection"...). Is there a way to make the ucs (z axis) tangential to the end of the helix?
View 4 Replies View RelatedI’ve an already drawn inclined line from a fixed point (saypoint (0,2) on Y-axis). The inclination is also fixed (say 150 tothe horizontal). My objective is to draw a circle with one quadrant at a fixedpoint (say point (1,0) on X-axis), so that, the line becomes a perfect tangentto the circle. The diameter of the circle may vary to make the line perfecttangent to the circle.
View 9 Replies View RelatedTrying to get evenly spaced line segments that lie on the circumference of a circle - every time I do the pattern repetition it gives me line segments the same length instead of constraining them to the circumference of the circle ?
View 1 Replies View RelatedI am attempting to keep the cable line of the crane always tangent to the circle at the top of the crane. The length of the crane (including the circle at the top) is being polar stretched but i am unable to keep the cable tangent to the top circle as i stretch and rotate the crane.
View 6 Replies View RelatedI am having some trouble trimming a line using a circle as my cutting edge,the line falls short of the circle,I have tried changing EDGEMODE and still the problem persists!
View 9 Replies View RelatedI am a new user of Autocad LT and looking for drawing a tangent line to a point on a circle.
View 7 Replies View Related[URL] ......
I'm trying to place the blue circle at the bottom of the drawing so its radius is 15mm from the mid point of the diagonal line on the right. I've been experimenting with snap points and the from command, but I can't seem to get it just right. I suspect I mess up with the coordinates from the offset point since it's on a diagonal line.