I want to insert dimension lines on this project. But instead of having an actual dimension I'd like it just to be a letter that refers back to a chart of possible dimensions for that element. How do I do this? I'm using AutoCad Architecture 2012.
Can i change the length of the dimension line 'extension' when my dimension text placement is beside the dimension line (see attached image)?dim line length.jpg
When doing an angle dimension and trying to put text under the dimension line, the text types out straight which if long enough will extend over the dimension line. Other then creating text with arctext, is there no other way to get it curved? I am using AutoCAD 2010.
my normal dimension style has text above dmension line & I want to add 'typical' to it below dimension line.
I have done this lot of time in my previous job an year back. but I can't seem to remember what to type between dimension text & the word I want to add in edit text box, so that it appers below dimension line.
is it possible to have a dimension style setup that shows the dimension text inline with the dimension - without having to move it?I have been looking but cannot seem to do it - is it possible and I am just missing it?
I made the switch from acad 2006 to 2014. I was able to add quick leader to my dimension menu in customize user interface, but I don't have an icon in my dimensions toolbar. I figured it out, I needed to customize toolbars also, not just menus.
I'm trying to get the dimension text that I pull out to the side closer to the actual dimension marks. The 2 1/2" and 2" shown have a minimum distance they can get toward their dimensions. I would like it to be about half of what it is, but so far I haven't been able to find the property that changes that.
Is it possible to override a dimension with some sort of formula or function that relates to the length of the dimension?
A simple linear scaling might be possible by inventing a new unit with the appropriate conversion ratio, but that wouldn't work. What I need for the dimension to display a length 400 less than the actual length.
Is there a way to override a dimension and have it shown as a GD&T Basic dimension. I can override a dimension with the text option but not with a box around the letter. It sounds strange to do this but the letter represents a dimension in a chart format that are Basic dimensions.
every one now a day i am making isometric drawings so i m little bit confuse in that i am using dimension and change the oblige angle text of dimension so is it right way or not ????
If I type the command UNITS and change the insertion scale to millimeter (mine was inches), what is going to happen? At first i used inches to draw 5 inches line and the get the dimension of it, second i drew again a line using the millimeter in units, but when i measured it still it is exact to the first line that i draw.
I am having an issue with my dimensions. If I have a dimension that is 1'-3" or larger, my extension line beyond my dimension line extends the normal length, but as soon as my dimension goes under 1'-3", the extension line then gets twice as long outside of the dimension line (see attachment). I have researched...and i can't seem to find a dim variable that will let me change this. is there anything to control this happening once my dimension goes below 1'-3"?
Usually when we enter RECTANGLE command, AUTOCAD will ask us to specify first corner point, then it will ask coodinate of second corner point.
Can the RECTANGLE command be set to straightaway insert dimension instead of coordinates?
Previous computer I used could do this, but this new computer can't. I don't know where to set it. Both computer using the same version of AUTOCAD LT2013. I reckon it could be set, but how?
I'm inserting dimensions and the tics keep coming out huge and not on the dimension line, in fact there's one on either side 20 ft out. If I change the drawing scale in the tab at a the bottom the tics get smaller and closer in, but they are still off the dimension string by a long shot.
I'd like to apply a property set to a dimension, tag it, and have the tag display the dimension value. This tag would be remote from the dimension, and on a separate layer, which would remain on when the dimension layer is frozen.
At present, the property set for dimensions appears not to include the dimension value.
I have to deal with the plans of others, some who change the dimensions through text formatting that I can see are fake or incorrect. I used to have a command that would detect the ACTUAL dimension but I can't seem to find it in ACAD 2010. find the command to restore the true dimensions?
I'm using different dimension styles for different scales on my drawing, however, if i change one dimension style text to a certain size, all of the others change too, is there something i'm doing wrong? I need every dimension style to be its own text size, but i'm having to manually change them every time.
I am trying to dimension a room in AutoCAD 2014, drawing in Architectual mode using the default template. I attached a screenshot of what I am seeing, the red lines are my dimensions but they show up with no text and I cannot figure out how to get the text to display.
I am using AutoCAD 2010 and when i go to print my design to PDF or even to a printer, the dimension lines do not show up. I have checked my layers and the dimension lines are not on defpoints, in fact they are on layer 0. I have tried to create a new layer and it still does not show up in the work space, let alone when i try to print it.
All I want to do is rotate one dimension. I want to leave all the others alone.
When I am editing my drawing, I double click on the dimension and get the diag box and unfortunately the rotate dimension command along with the degree box is grayed out.
I need to routinely insert text into or near my dimensions but my dimensions need to be kept as basic dimensions meaning they need to have the box around them as in the picture. What I want to do is what the first dimension shows with the "2x" outside the dimension box but that first one is a combination of suppressing the dimension line and inserting a leader so the 2x will be within the line. Otherwise the normal dimension is what is shown below. How can I increase the line gap from the dimension options without 1) increasing the dimension box with DIMGAP or 2) inserting a line that's separate from the dimension itself or 3) exploding
I am having an issue with the obliques in one of my drawing files. They are set to be 1/8" but are very small to the point you cant even see them. However, I have the same settings in another drawing file and they are the correct size. I have compared all the settings of the drawings that I can think of but still can't find an answer. It seems to be a scale issue but my scales from dwg file to dwg file seem to be the same.