I created special dimension styles in Inventor 2013 in a drawing and trying to get them into another Inventor drawing. Can this be done like in Autocad by coping to the clip board and pasting into the new drawing?
I want to have two dimension styles in one dimension line. The first style would be a point to point dimension with the text centered and above the dimension line. The second style would be a running dimension to each point with the text over the second extension line and above the dimension line. Right now I am using two seperate dimension lines, one on top of the other. I'm trying to find a way to combine them into one dimension line so that I won't have to dimension the same thing twice.
At first I thought that using alternate units would work, however I was not able to find a way to seperate the two dimensions. Also, I didn't see how to make the alternate units a running dimension.
Is there a way to assign different dimension styles to different sheets in an idw. I have idw drawings with several sheets and use a couple of different dimension styles depending on what is on each sheet. I've created the dimension styles I want to use but I don't know how to assign a dimension style to a specific sheet. For now what I am doing is dimensioning, then as needed for the dimensions that need a different style, right click on the dimension and select new dimension style to changes its dimension style. I would like to assign dimension styles to specific sheets, is there a way to do this? Even though borders, title blocks, etc. are the same throughout the sheets, do I need to create different sheet formats to do this?
I always put the dimensions and text leaders in model space, is it true if I plan to have 3 different viewport scales, I would have to create 3 different dimension styles for each VP scale, it’s quite hard to predict in advance which VP scale that I am going to use, Let say I am going to use 1/8”=1’ what is the simple math formula to use?
In the dimension styles we have linear suffix and angular suffix. For angular dimensions we just want the degree symbol and for the Linear suffix we want the foot symbol. But when we dimension an angle we get both degree and a foot symbol, and we just want the degree symbol. We put the foot symbol on the linear units only yet it shows up on the angular dimensions.
I received a file (exported from datacad) with apx. ~1000 dimension styles. I selected all dimensions and changed their style to a new style. Now I want to delete the old styles, but Autocad says they are used. I tried purging, but it doesn't work.
We have created one Style, but within this Style are two Dimension types (Dual and SIngle)
When a drawing from a model is created it defaults to the Dual Option and we can only select the Single Dimensions by individually selecting the Dimension and editing to Single Dimension, which can be time consuming.
Is there a way to select the Dimension type for the whole drawing?
I was wondering is there a way to export text, dimension, leaders and table styles? I have been trying for a while but can figure it out not even sure that you can.
How do I get my dimension styles, door styles, window styles, etc. from Architectural 2011 to 2012? I migrated but I don't see where it brought my styles over.
We have, as our standard library default dimension style, a 1/32 fractional style, called "1/32-FRACTION". Various Object Types, like Linear Dimension are set to this Object Style. When I create a drawing, then these Object Defaults are in effect.
This means that, doing nothing while executing a dimension command, I get fractional dimensions by default. This works good.
However, sometimes I want to create a drawing where the default dimension style is "X.XXX-DECIMAL" without changing the Object Defaults found in the style library. I've tried to make the changes from within the style library and then save this as a template. However, when I try to make a drawing based on this template, Inventor states that the styles in the template differ from the styles in the library" and then busily goes about undoing what I careful did.
So I'm hoping there is something in the API I can call on to do this with a macro. Is it possible to write a macro that after you start a drawing, flips all the various Object Styles from "1/32-FRACTION" to "X.XXX-DECIMAL"?
I had a user ask why some dimension styles cannot be purged even if all the dimensions are deleted from the project.
Most probably the dimension style is used in a family that is loaded in the project.
When you select all dimension instances in the entire project, it will not select those included in the families. But the purge function will 'see' that it is still used in a family and therefore it will not be listed in the purge dialog.
So you will have to find in which family the dimension style is used.
I don't think there is an easy way to do it. I would make a copy of the project and then delete a bunch of families until the dimension style can be purged, then refine the research until to find the family that contains the dimension style.
When calling the DVD burn capability from VSP X3, it seems like there is no choice in DVD factory to create a DVD without a style. I simply want to play the video once through to completion when inserted into a player. Am unable to find the answer in the forums or the "documentation."
I wrote the code below (allow the user to pick points in different viewports and then override an existing dimension's text with the difference in X values. The (hopefully) last issue is that the fractions should be vertically stacked and at 100% text size.
(defun c2text () (command "mspace") (setq p1 (getpoint "Select left point "))
How do you apply certain contour label styles to certain surface styles (i.e. When I have an existing surface i want the default contour labels to be an "existing contour" style). Right now the default is a "finished contour" label style for all surfaces.
How do update the styles library to keep from getting the Styles Conflict error box. I have used the Standard.dwg file that loaded with Inventor 2012 but everytime I change styles and save the changes in a new template in reverts back to the library definitions.
I used to be able to select 'NO' in the LIbrary option of the Projects Folder but that optiion no longer exists.
We've created a new parts list style for a border.When the border tempalt file is on the c: drive...everything works hunky dory...parts list, revision tables, etc.But as soon as we copy and paste that border into the template library folder for new drgs...the parts list style is missing from the local styles?
So to make it appear on the new document...the style manager has to be set at all styles and the new parts list style has to be saved to the document?What aren't we doing to make it appear on the template?
Also note that because the drawing border template is in a template folder as part of the design projects...it is NOT editable...so it has to be edited outside the template folder.
How do I create an Inventor part with a cost that will update according to the part dimensions changing. For example, we design products using aluminum extrusions and our cost is determined by foot length. How can I create the extrusion part to have a per foot cost that will dynamically update when I change the parts length for an assembly? It seems to me to be a fundamental need for many industries.
I will happily take any links to information that will explain this process. I cannot find anything online that clearly explains the process of creating parts with costs and variables.
I'm trying to get the dimension text that I pull out to the side closer to the actual dimension marks. The 2 1/2" and 2" shown have a minimum distance they can get toward their dimensions. I would like it to be about half of what it is, but so far I haven't been able to find the property that changes that.