In the dimension styles we have linear suffix and angular suffix. For angular dimensions we just want the degree symbol and for the Linear suffix we want the foot symbol. But when we dimension an angle we get both degree and a foot symbol, and we just want the degree symbol. We put the foot symbol on the linear units only yet it shows up on the angular dimensions.
View 5 Replieswhy my dimstyle appears different when I use different versions of AutoCAD.
In LT it is correct (left hand image), both styles are STANDARD font but in the full version (right hand image) the suffix text style is ROMANS.
I am using a dimension style that annoyingly adds the number "1/8" at the end of every angular dimension. Linear dimensions are fine.
I already checked and there is no suffix specified in the style. I also tried the dim/up feature, but the "1/8" still appears.
Degrees in "Units" are set to decimal. They are also set in decimal within the dimstyle.
Just to clarify, the number "1/8" is added after the actual dimension. I drew a 90 deg rectangle and the dim shows 90 1/8.
I could certainly try to create a new dimstyle from scrap, but perhaps any better tip.
I created special dimension styles in Inventor 2013 in a drawing and trying to get them into another Inventor drawing. Can this be done like in Autocad by coping to the clip board and pasting into the new drawing?
View 2 Replies View RelatedI'm not able to create a
"DIMSTYLE" with Dimblk1 different Dimblk2
public static ObjectId CreateDimstyle(DimStyleTableRecord dim, string name, string seta1, string seta2) { Document acDoc = Application.DocumentManager.MdiActiveDocument; Database acCurDb = acDoc.Database; using (Transaction acTrans = acCurDb.TransactionManager.StartTransaction()) { DimStyleTable dimStyleTable = (DimStyleTable)acTrans.GetObject(acCurDb.DimStyleTableId, OpenMode.ForWrite); DimStyleTableRecord di
[code]....
I want to have two dimension styles in one dimension line. The first style would be a point to point dimension with the text centered and above the dimension line. The second style would be a running dimension to each point with the text over the second extension line and above the dimension line. Right now I am using two seperate dimension lines, one on top of the other. I'm trying to find a way to combine them into one dimension line so that I won't have to dimension the same thing twice.
At first I thought that using alternate units would work, however I was not able to find a way to seperate the two dimensions. Also, I didn't see how to make the alternate units a running dimension.
Is there a way to assign different dimension styles to different sheets in an idw. I have idw drawings with several sheets and use a couple of different dimension styles depending on what is on each sheet. I've created the dimension styles I want to use but I don't know how to assign a dimension style to a specific sheet. For now what I am doing is dimensioning, then as needed for the dimensions that need a different style, right click on the dimension and select new dimension style to changes its dimension style. I would like to assign dimension styles to specific sheets, is there a way to do this? Even though borders, title blocks, etc. are the same throughout the sheets, do I need to create different sheet formats to do this?
View 6 Replies View RelatedInside of the Style& Standard Editor (Manage-> Style editor) we use ANSI and a Company standard created off of ANSI.
But when I choose the filter to ALL STYLES, I can see JIS, DIN, All other unwanted styles. How can I get rid of them?
Do you all have them too? How do you get rid of them if you dint use them?
C1
Inventor Professional 2013
Vault Collaboration 2013
I always put the dimensions and text leaders in model space, is it true if I plan to have 3 different viewport scales, I would have to create 3 different dimension styles for each VP scale, it’s quite hard to predict in advance which VP scale that I am going to use, Let say I am going to use 1/8”=1’ what is the simple math formula to use?
View 3 Replies View RelatedWhen i match dimension styles from one viewport in layouts to another, all scaled to the same scale, the dimensions match nicely.
However if i move the second dimension, the one matched to the first, the dimension changes to another scale.
I received a file (exported from datacad) with apx. ~1000 dimension styles. I selected all dimensions and changed their style to a new style. Now I want to delete the old styles, but Autocad says they are used. I tried purging, but it doesn't work.
View 8 Replies View RelatedI would liketho know how it is done / is there a command for that, lisp.
View 1 Replies View RelatedHow do you make custom dimension styles global? How do you apply them to existing drawings with recreating each time.
Autocad Lt 2012
I am trying to implement our new Styles Library for our Dimension styles. I keep getting this error (see attached).
I have done everything I can think of, I have mapped the default library to the new styles library location on the server. I have tried everything.
We have created one Style, but within this Style are two Dimension types (Dual and SIngle)
When a drawing from a model is created it defaults to the Dual Option and we can only select the Single Dimensions by individually selecting the Dimension and editing to Single Dimension, which can be time consuming.
Is there a way to select the Dimension type for the whole drawing?
Is there any way to change the colors of the dimensions styles, including dimension lines, extension lines and text to "by layer"
I found a code to change the colors, but only affects the current dimensions in the drawing and the styles do not change.
I was wondering is there a way to export text, dimension, leaders and table styles? I have been trying for a while but can figure it out not even sure that you can.
View 5 Replies View RelatedHow can I load multiple dimension styles into an Inventor drawing file without loading them into a template file?
View 1 Replies View RelatedHow do I get my dimension styles, door styles, window styles, etc. from Architectural 2011 to 2012? I migrated but I don't see where it brought my styles over.
View 4 Replies View RelatedWe have, as our standard library default dimension style, a 1/32 fractional style, called "1/32-FRACTION". Various Object Types, like Linear Dimension are set to this Object Style. When I create a drawing, then these Object Defaults are in effect.
This means that, doing nothing while executing a dimension command, I get fractional dimensions by default. This works good.
However, sometimes I want to create a drawing where the default dimension style is "X.XXX-DECIMAL" without changing the Object Defaults found in the style library. I've tried to make the changes from within the style library and then save this as a template. However, when I try to make a drawing based on this template, Inventor states that the styles in the template differ from the styles in the library" and then busily goes about undoing what I careful did.
So I'm hoping there is something in the API I can call on to do this with a macro. Is it possible to write a macro that after you start a drawing, flips all the various Object Styles from "1/32-FRACTION" to "X.XXX-DECIMAL"?
I had a user ask why some dimension styles cannot be purged even if all the dimensions are deleted from the project.
Most probably the dimension style is used in a family that is loaded in the project.
When you select all dimension instances in the entire project, it will not select those included in the families. But the purge function will 'see' that it is still used in a family and therefore it will not be listed in the purge dialog.
So you will have to find in which family the dimension style is used.
I don't think there is an easy way to do it. I would make a copy of the project and then delete a bunch of families until the dimension style can be purged, then refine the research until to find the family that contains the dimension style.
I am trying to assign objects (only in UNLOCKED layers) with a new layer.So basically, the user will select all the objects in the drawing.
After selecting (ex. press enter after window selecting), only objects in UNLOCKED layers will have a new layer.
Following is the code I am using...But I keep getting eOnLockedLayer exception.How should I handle this issue?
using (Transaction acTrans = acCurDb.TransactionManager.StartTransaction())
{
PromptSelectionOptions pSelOpts = new PromptSelectionOptions();
pSelOpts.MessageForAdding = "Select all objects";
PromptSelectionResult pSelRes = acDoc.Editor.GetSelection(pSelOpts);
if (pSelRes.Status == PromptStatus.OK)
[code]....
what the command for Dim Suffix? I wanted to add "m" in my dimension text but i need the command because i am using it for a script file.
View 3 Replies View RelatedI have a technical wireframe drawing that I need to use in an InDesign-built publication. The drawing is a bitmap and when I import it into ID it is light , a little muddy a nearly impossible to read when printed out. I've tried lots of different things to darken and increase the resolution with little or no effect. his includes: mode changes, changing the blending mode on a duplicate of the backgroud layer, increasing the resoltuion, etc. with no success.
View 10 Replies View RelatedI have a ton of fonts that I would like to use in PS, But I don't want them to load when I start PS. How can I import them into PS when I want to use them, not all at once. Reason being is that I have a TON of fonts and it slows performance and program start takes longer.
In other words, can I keep them all in a folder outside of the PS folder and access them on a need to use basis? I have lots of RAM, I just don't like any of the system resources taken up if they don't have to be.
This happened in the middle of dimensioning A drawing. Was adding tolerance and some text to some dimensions which usually looks like this.
1.500±.001" Turn Runner
But all of a sudden it started to look like this.
1.500" Turn Runner±.001" Turn Runner
Everything in the dim suffix field is repeated twice and I don't know why.
No variables were changed...I literally did one dimension that came out normally and the next one did this.
Now all dimensions do this. There is a single dimstyle with no daughter styles.
I have set up a dimension style in vb .net, I am having rouble setting the suffix and the linear precision? Here is what I currently have:
Dim acDimStyleTbl As DimStyleTable
acDimStyleTbl = acTrans.GetObject(acCurDb.DimStyleTableId, _ OpenMode.ForRead)
Dim sDimStyleName As String = "test"
Dim acDimStyleTblRec As DimStyleTableRecord = New DimStyleTableRecord()
[code]....
I need to add a single quotation mark for the suffix ( " ie: inches ) and I want the precision at '.00'.
I'm having trouble displaying the units for dimensions. The issue is with the suffix.
When I add the " suffix to indicate inches autocad also adds the suffix to the angular dimension.
2 questions...
Is there a way to suppress the suffix for angular dimensions? Do I need to have a dimension style just for angular dimension?
I do not want to dimension in architectural because I don't want the dimensions to change to feet and inches.
I've got some frame by frame animations that I want to edit in CS4 extended and I've realized that a few of them are simple color adjustments that would save a huge amount of time if I made them actions. I have no problems with the adjustments themselves and clicking advance frame works for repeated use, but then I need to selected the appropriate/visible layer or the actions won't apply. Is there a way to "advance" the layer in an action?
View 2 Replies View Relatedim using IV 2011 RS, the spacing of my suffix is like double spaced it looks like 15 " and i want them to look like 15"
View 1 Replies View Relatedwhere I cannot set the opacity partway transparent when dealing with a png file and another png file as a selection flotation!!! the opacity sliders in the layers tab seem to do nothing but If I go below 50% the layer disappears!!! I can only have it 100% opaque or 100% transparent (which is when the slider is 50% or below) anywhere else 51=99% acts as 100% opaque!!!
View 5 Replies View Related