where I cannot set the opacity partway transparent when dealing with a png file and another png file as a selection flotation!!! the opacity sliders in the layers tab seem to do nothing but If I go below 50% the layer disappears!!! I can only have it 100% opaque or 100% transparent (which is when the slider is 50% or below) anywhere else 51=99% acts as 100% opaque!!!
View 5 RepliesI wanted to set up a template for dealing with printing four images on a sheet.
I created an image the size of the sheet and then added four layers, each of the desired image size which needed to be positioned appropriately.
When I went to position the images, I could not find any reasonable way with the move command or with any of the layer operations to position each layer precisely.By that I mean simply type in the coordinates of the upper left corner, or move with the mouse where I see a text version of the upper left coordinate of the new layer position as I move.
If trying to position using the mouse, the lower left of the status line shows the position of the pointer itself, so that is useless in positioning the layer as a whole; and the numbers to the right of the per-cent size display show how much the layer has moved relative to its starting position, not the absolute position of the upper left corner. (I'll grant that the latter is useful, but in this case one needs something else, particularly if a layer has been moved and needs to be repositioned to a fixed location.)
The only way I could get what I wanted was to expand to 800%, and at that magnification I could grab the upper left corner with the mouse so the mouse position was itself the upper left corner position. Surely there's a better way?
Layer/Layer to Boundary Size... does not appear to work as advertised. The offset appears to be relative to the original size of the layer, not the original size of the image. The panner image is limited to the size of the layer, not the image. When you first bring up the dialog, you are unable to reposition the layer unless you change the layer size to make the layer smaller. If you make the layer half the size of its original size and then click "Center", the offset is set to - 1/2 the size of the original image, not + 1/2, which seems bizarre. The layer is scaled properly, and ends up where you would expect (based on the center command given, but not based on the offsets indicated), but the values in the Offset boxes seem to have the wrong sign. It works by moving the original layer relative to the desired new layer, rather than position the new layer size relative to the image. Which means you can't move the layer relative to the image if the layer is smaller than the image, and the graphic panner doesn't show you the layer position relative to the image as a whole. It is not at all intuitive and is not useful for quite a few common cases.
Layer/Transform/Offset shifts the contents, but not the layer itself. Which is what it is supposed to do, so that's ok; it's just not usable for this operation.
Using PS CS4 on Windows XP. I have an image on the left with apples showing 4 that are transparent (opacity set to 50%). I am wondering if there is a way to make the apple look transparent, but not transparent to the others so that the apples look more like they do on the right (not going through each other). I understand these are completely solid, but I was wondering if there is a way to make an object look like it's transparent, but not be able to go through another object.
View 9 Replies View RelatedThrough the channels window, I can paint on the R, G and B channels individually. That's great, but where's the Alpha channel? Photoshop only allows me to create a new opacity layer which simply subtracts from the PNG's native opacity - it can't add to it. What I need is to INCREASE opacity.
In other words: I have parts of this PNG which are semi transparent, and I need them to become opaque. How can I do that?
EDIT: it as a single RGBA pixel value. I need to turn (0.5, 0.5, 0.5, 0.0) into this (0.5, 0.5, 0.5, 1.0). Do you see?
Using the eraser tool or several other methods I can set pixels in a layer to be semi-transparent. Let's say I save such a layer without history. How do I make these pixels 100% opaque again? Is there some tool that does the opposite of the eraser?
View 9 Replies View RelatedIs there a way to restore lost opacity to a layer? Let's say I have a semi-transparent area, and want to bring the opacity there back to 100%.
View 14 Replies View RelatedWhat im trying to do is edit a tga file..... this is the file im trying to edit [URL] .......
The image its a tga file that its transparent and after i edit it for example i change the colors of the stuff on image, and save it it becomes dark or other colors it loses its transparency how can i keep it as it is with transparency after editing and keep it as tga....
I have a layer with semi-transparent pixels and I want to change there opacity to 100%. Or use some tool to change there opacity gradually by hand.
Is this possible at all in Adobe Photoshop CS5?
I just started using GIMP last week
I'm trying to put a watermark on an image using the opacity bar for the text. However, the text remains 100% opaque until I get down to 50% opacity, at which point it completely disappears. I thought there may be something wrong with the text layer (not sure if that's the right term.. layers and paths, etc. are all new to me), so I tried it with other tools such as the eraser and the same problem occurs. Is there a bug in my program or am I just really new at this?
When I move the opacity slider, it doesn't change until it hits 50% - then it disappears. It also shows up as pure solid or purely missing, when I try to use it on my website.
How do I get 60% opacity on an image?
I've imported some linework from sketchbook, and despite the tool being set to draw at 100% opacity, my lines are partially transparent.
I want to increase their opacity, but drawing over all the lines again would be terrible.
The lines are all a solid black (although I have another layer with various colors) so there should be some simple operation I can do to adjust that opacity, but I can't figure out what.
(I am using version 2.6.12). I noticed that when I move the Opacity Slider, nothing happens on the image. I tried that on Windows, Linux (I am using Gimp version 2.6.11 on OpenSUSE 11.4), and Mac. I read somewhere that I need to go to Image --> Modify and select RGB. But it is already selected.
View 1 Replies View Relatedis it possible to rotate a layer in gimp with the opacity turned on?
everytime i rotate something the object becomes a full solid even though i had set it with an opacity.
How do you change the layer opacity?
View 1 Replies View RelatedI completely reinstalled GIMP 2.8 and put Andrew's Script (found here: URL....) into "C/USER/ADMIN/GIMP 2.8/SCRIPTS" (I'm stuck with Windows Vista Home Premium) running on an Acer laptop. Now the "Opacity" and "Brush Size" sliders have shown up where they're supposed to have been on the first install.
My middle mouse wheel used to control brush size - I recently reinstalled my updated Logitech mouse drivers and I'll bet if I go to "Setpoint" in my system tray, I'll be able to configure the mouse wheel from there. That's where I had to go in order to fix the tilt control in Google Earth after I updated the mouse drivers.
I just installed GIMP 2.8, with Andrew's GIMP Script FU and now I can't find the brush opacity slider anywhere (EDIT: Or the brush/eraser/pencil etc SIZE slider - there also appears to be no way to set my middle mouse wheel as the controller for the brush size). I've used GIMP for awhile and I know how to move around but I'm not very good with it.
I wanted to know what the best way was to create this? I was going to make a bunch of hexagons and change the opacity but this would take ages and be all over the place.
View 6 Replies View RelatedHow to assign keyboard shortcut for brush opacity in GIMP...
View 1 Replies View RelatedIt does it every 4-6 times which is really really often since you brush about 10 times every 3 seconds or so when digital painting especially when shading, lighting, blending, etc with brushing.
Â
Why does it do this? I cant recall when it started doing this but I think it was either when I updated from CS4 to CS6 or maybe it just randomly kicked in. I already updated my drivers and re-installed my tablet.
Is it possible to set the blending mode or the opacity settings formultiple layers all at once? Ideally I'd like to select multiple layersand change the settings for all of them at once, but I can't seem to figureout a way to do this, so I think it doesn't exist?
Is this something other people would like to be able to do?
I seem to come unstuck when I apply colour using the 'Stroke Path' option. Basically I need to know if there's a way of determining the opacity of the stroke line? In some cases I don't need to have such a 'dense' colour. I want to see a little of what I've 'painted over' so as to keep some of the detail.
View 3 Replies View RelatedI was trying painting with gimp and there is a shortcut in gimp to change the size of the brush/opacity my moving the stylus like you can on photoshop or sketchbook pro.
ALT+ctrl on a mac
This would be an incredible time-saver for us artists and not very complex. If not I will suggest this feature to the gimo developers.
I have a technical wireframe drawing that I need to use in an InDesign-built publication. The drawing is a bitmap and when I import it into ID it is light , a little muddy a nearly impossible to read when printed out. I've tried lots of different things to darken and increase the resolution with little or no effect. his includes: mode changes, changing the blending mode on a duplicate of the backgroud layer, increasing the resoltuion, etc. with no success.
View 10 Replies View RelatedI have a ton of fonts that I would like to use in PS, But I don't want them to load when I start PS. How can I import them into PS when I want to use them, not all at once. Reason being is that I have a TON of fonts and it slows performance and program start takes longer.
In other words, can I keep them all in a folder outside of the PS folder and access them on a need to use basis? I have lots of RAM, I just don't like any of the system resources taken up if they don't have to be.
when I exercise the opacity slider for an active layer I can see the full range of opacity follow the setting. Somehow I've gotten this v2.6 on a Linux box into a mode where the visible opacity doesn't follow the slider full range. Instead it is all or nothing. At 50% or less opacity the layer is entirely transparent and at 50.1% or more it is entirely opaque.
View 2 Replies View RelatedUsing a Mac I have created a path round an object and wish to reduce the opacity of the background but do not know how to do it?
View 5 Replies View RelatedI'm trying to bind the number keys to specific values for opacity/transparency of brushes, so I embarked for the shortcut key editor where I found that the "set transparency" does exactly the same as "completely transparent".
Is there a way to define what value "set transparency" sets it to? what I'm trying to do even possible with GIMP?
In the animation I am working on, I need an object to instantly go from 100% opacity to 0% opacity. The problem is, even if you use the opacity of the layer as a keyframe, the object will not instanlty vanish, even if it is only on for the timeruler for a quick amount of time.
Â
I need a tool that will drop from 100% opacity to 0% instantly.
I've got some frame by frame animations that I want to edit in CS4 extended and I've realized that a few of them are simple color adjustments that would save a huge amount of time if I made them actions. I have no problems with the adjustments themselves and clicking advance frame works for repeated use, but then I need to selected the appropriate/visible layer or the actions won't apply. Is there a way to "advance" the layer in an action?
View 2 Replies View RelatedI am trying to assign objects (only in UNLOCKED layers) with a new layer.So basically, the user will select all the objects in the drawing.
After selecting (ex. press enter after window selecting), only objects in UNLOCKED layers will have a new layer.
Following is the code I am using...But I keep getting eOnLockedLayer exception.How should I handle this issue?
Â
using (Transaction acTrans = acCurDb.TransactionManager.StartTransaction())
{
PromptSelectionOptions pSelOpts = new PromptSelectionOptions();
pSelOpts.MessageForAdding = "Select all objects";
PromptSelectionResult pSelRes = acDoc.Editor.GetSelection(pSelOpts);
if (pSelRes.Status == PromptStatus.OK)
[code]....
In the dimension styles we have linear suffix and angular suffix. For angular dimensions we just want the degree symbol and for the Linear suffix we want the foot symbol. But when we dimension an angle we get both degree and a foot symbol, and we just want the degree symbol. We put the foot symbol on the linear units only yet it shows up on the angular dimensions.
View 5 Replies View RelatedAfter installing a new larger hard drive on my Mac, I got an icon in my toolbar dealing with backup/sync. Checked is the line, "Backup/sync only when idle." (I don't know if I want to change this or not - do I?) I'm instructed to sign into photoshop.com through Photoshop Elements, but when I try to do that I get Error 400. I just learned that photoshop.com no longer exists - true? If this is nothing to worry about, how do I remove that icon from the toolbar? It has a lock symbol on it.
View 1 Replies View Related