GIMP :: How To Get 60% Opacity On Image

Nov 12, 2012

When I move the opacity slider, it doesn't change until it hits 50% - then it disappears. It also shows up as pure solid or purely missing, when I try to use it on my website.

How do I get 60% opacity on an image?

View 6 Replies


ADVERTISEMENT

GIMP :: Opacity Bar Not Working?

Jul 6, 2013

I just started using GIMP last week

I'm trying to put a watermark on an image using the opacity bar for the text. However, the text remains 100% opaque until I get down to 50% opacity, at which point it completely disappears. I thought there may be something wrong with the text layer (not sure if that's the right term.. layers and paths, etc. are all new to me), so I tried it with other tools such as the eraser and the same problem occurs. Is there a bug in my program or am I just really new at this?

View 10 Replies View Related

GIMP :: How To Draw At 100% Opacity

Apr 1, 2013

I've imported some linework from sketchbook, and despite the tool being set to draw at 100% opacity, my lines are partially transparent.

I want to increase their opacity, but drawing over all the lines again would be terrible.

The lines are all a solid black (although I have another layer with various colors) so there should be some simple operation I can do to adjust that opacity, but I can't figure out what.

View 1 Replies View Related

GIMP :: Opacity Slider Has No Effects?

Apr 26, 2012

(I am using version 2.6.12). I noticed that when I move the Opacity Slider, nothing happens on the image. I tried that on Windows, Linux (I am using Gimp version 2.6.11 on OpenSUSE 11.4), and Mac. I read somewhere that I need to go to Image --> Modify and select RGB. But it is already selected.

View 1 Replies View Related

GIMP :: Rotating While Opacity Turned On?

Aug 29, 2011

is it possible to rotate a layer in gimp with the opacity turned on?

everytime i rotate something the object becomes a full solid even though i had set it with an opacity.

View 2 Replies View Related

GIMP :: How To Change Layer Opacity

May 6, 2012

How do you change the layer opacity?

View 1 Replies View Related

GIMP :: Brush Opacity Slider Location In 2.8

Nov 6, 2012

I completely reinstalled GIMP 2.8 and put Andrew's Script (found here: URL....) into "C/USER/ADMIN/GIMP 2.8/SCRIPTS" (I'm stuck with Windows Vista Home Premium) running on an Acer laptop. Now the "Opacity" and "Brush Size" sliders have shown up where they're supposed to have been on the first install.

My middle mouse wheel used to control brush size - I recently reinstalled my updated Logitech mouse drivers and I'll bet if I go to "Setpoint" in my system tray, I'll be able to configure the mouse wheel from there. That's where I had to go in order to fix the tilt control in Google Earth after I updated the mouse drivers.

I just installed GIMP 2.8, with Andrew's GIMP Script FU and now I can't find the brush opacity slider anywhere (EDIT: Or the brush/eraser/pencil etc SIZE slider - there also appears to be no way to set my middle mouse wheel as the controller for the brush size). I've used GIMP for awhile and I know how to move around but I'm not very good with it.

View 1 Replies View Related

GIMP :: How To Make Hexagon And Change Opacity

Jan 22, 2013

I wanted to know what the best way was to create this? I was going to make a bunch of hexagons and change the opacity but this would take ages and be all over the place.

View 6 Replies View Related

GIMP :: How To Set Keyboard Shortcut For Brush Opacity

Sep 8, 2011

How to assign keyboard shortcut for brush opacity in GIMP...

View 1 Replies View Related

Photoshop :: Pen Pressure Opacity (glitches) And Do Full Opacity Often When Try To Digital Paint

Aug 26, 2013

It does it every 4-6 times which is really really often since you brush about 10 times every 3 seconds or so when digital painting especially when shading, lighting, blending, etc with brushing.
 
Why does it do this? I cant recall when it started doing this but I think it was either when I updated from CS4 to CS6 or maybe it just randomly kicked in. I already updated my drivers and re-installed my tablet.

View 2 Replies View Related

GIMP :: Cannot Set Opacity Partway Transparent When Dealing With PNG File

Sep 18, 2012

where I cannot set the opacity partway transparent when dealing with a png file and another png file as a selection flotation!!! the opacity sliders in the layers tab seem to do nothing but If I go below 50% the layer disappears!!! I can only have it 100% opaque or 100% transparent (which is when the slider is 50% or below) anywhere else 51=99% acts as 100% opaque!!!

View 5 Replies View Related

GIMP :: Set Mode Or Opacity For Multiple Layers At Once? (2012)

May 22, 2012

Is it possible to set the blending mode or the opacity settings formultiple layers all at once? Ideally I'd like to select multiple layersand change the settings for all of them at once, but I can't seem to figureout a way to do this, so I think it doesn't exist?

Is this something other people would like to be able to do?

View 1 Replies View Related

GIMP :: Applying Color - Stroke Path Opacity

Oct 23, 2012

I seem to come unstuck when I apply colour using the 'Stroke Path' option. Basically I need to know if there's a way of determining the opacity of the stroke line? In some cases I don't need to have such a 'dense' colour. I want to see a little of what I've 'painted over' so as to keep some of the detail.

View 3 Replies View Related

GIMP :: Change Brush Size Opacity By Moving The Mouse

Jul 30, 2013

I was trying painting with gimp and there is a shortcut in gimp to change the size of the brush/opacity my moving the stylus like you can on photoshop or sketchbook pro.

ALT+ctrl on a mac

This would be an incredible time-saver for us artists and not very complex. If not I will suggest this feature to the gimo developers.

View 5 Replies View Related

GIMP :: Visible Opacity Doesn't Follow Slider Full Range

Jul 8, 2012

when I exercise the opacity slider for an active layer I can see the full range of opacity follow the setting. Somehow I've gotten this v2.6 on a Linux box into a mode where the visible opacity doesn't follow the slider full range. Instead it is all or nothing. At 50% or less opacity the layer is entirely transparent and at 50.1% or more it is entirely opaque.

View 2 Replies View Related

GIMP :: Created Path Round Object - How To Reduce Opacity Of Background

Nov 22, 2012

Using a Mac I have created a path round an object and wish to reduce the opacity of the background but do not know how to do it?

View 5 Replies View Related

GIMP :: Bind Number Keys To Specific Values For Opacity / Transparency Of Brushes

Apr 3, 2013

I'm trying to bind the number keys to specific values for opacity/transparency of brushes, so I embarked for the shortcut key editor where I found that the "set transparency" does exactly the same as "completely transparent".

Is there a way to define what value "set transparency" sets it to? what I'm trying to do even possible with GIMP?

View 4 Replies View Related

Photoshop :: Reducing Opacity On Parts Of An Image

Dec 12, 2007

how do i reduce the opacity on parts of an im age, i have tried selecting part of the image with the marque tool and then reducing the opacity but it still reduces it for the full image.

View 4 Replies View Related

Photoshop :: Change Opacity Of Section On Image

Apr 15, 2009

Image is 800px x 150px, i want to change the opacity in the top left of the image for a rectangular section of 300px x 50px.

So i thought i would highlight the section(300px x 50px) with the rectanglar marquee tool, which gives a dotted rectangle, now i thought by changing the opacity slider over on the right side in the layers palet then this would work, but instead the opcaity for the whole image is still changed, how do i have only the section i want to change the opcaity for?

View 1 Replies View Related

Photoshop :: Reducing Opacity On Parts Of An Image

Dec 12, 2007

how do i reduce the opacity on parts of an image, i have tried selecting part of the image with the marque tool and then reducing the opacity but it still reduces it for the full image.

View 2 Replies View Related

Photoshop :: Scanned Image :: Lines To Have Opacity?

Jun 22, 2004

I scanned a lined image into photoshop, and now I want the lines to have opacity so that I may color underneath them, but I am clueless on how to do this. I have photoshop 7, and the link to my image is below. Code:

View 5 Replies View Related

After Effects :: Getting An Object To Instantly Go From 100% Opacity To 0% Opacity

Feb 10, 2014

In the animation I am working on, I need an object to instantly go from 100% opacity to 0% opacity. The problem is, even if you use the opacity of the layer as a keyframe, the object will not instanlty vanish, even if it is only on for the timeruler for a quick amount of time.
 
I need a tool that will drop from 100% opacity to 0% instantly.

View 2 Replies View Related

Photoshop :: Prevent Small Image From Decreasing Opacity When Enlarging It In Transform Tools?

May 20, 2012

I'm trying to enlarge a sprite to recieve better colorization, and it makes the image lose opacity when I do so?

View 1 Replies View Related

GIMP :: Layer Groups And Layer Modes / Opacity?

May 14, 2012

I just downloaded GIMP 2.8 (on Windows 7) and was using the layer groups to organize a project I'm doing. I noticed that whenever I put the layers into the layer group, nothing I do to them actually affects the image (for example if I change the opacity of the layer, it doesn't actually change). If I drag them out of the layer group they function perfectly; sometimes if I edit them and then drag them into the group they also work fine.

As I was writing this post I tested dragging a layer set to "dodge" into the group and it didn't work. It kept the dodge setting, but it looked as if it was on normal; however, I drug another layer set on dodge into the group and it worked fine.

Is this feature just broken on Windows, or does it not work like I thought (where you can drag them in and edit them individually, or edit them all by editing the layer group itself)?

View 4 Replies View Related

GIMP :: High Resolution File - JPEG Image Plug-in Could Not Save Image

Aug 18, 2011

So I am making digital color prints at 24x30. the photography work is about color fields and gradients, so I need super high res files. I have set the size to 24000x30000 pix at 1000 dpi..now my problem, when i go to save the gimp file as a jpeg i get this error message "JPEG image plug-in could not save image"

View 3 Replies View Related

GIMP :: Cutting Hole In Image Of TV Screen To Insert (layer Over) Image

Jul 25, 2012

I am making a video in Nero Vision 10 and need to cut out the screen of a tv so that I can layer the TV over an image/video so it looks as though it is on the screen. I enclose a screenshot of the project. 'Transform-tools-crop' only cuts in straight lines so I wonder which device I should use which can cut out an odd bespoke shape? You can see in the uploaded image from the project how the image currently cannot fill the frame without covering it.

View 7 Replies View Related

GIMP :: Overlay Portion Of Image With Faded Map With Non-transparent Part Of Second Image

Apr 4, 2012

I have a PNG image with only one layer as a start point. It has a faded map on it.

I have a second PNG image with a hex grid on it. I do colour to Alpha to establish transparency on the hex grid for white filled hexes (others are not filled with white).

Now, I wish to overlay a portion of the first image with the faded map with the non-transparent part of the second image.

So I select by colour (for the hexes not filled with white) on the second image (the overlay) and I then paste to the first image (after creating a transparency layer and selecting it to receive the overlay).

I see the desired overlay section (minus any transparent stuff as expected), however it is centered over the map in the first image, not where I want it to be. It is a floating selection and must be anchored. So I select the anchor icon in the layer dialog and I think I anchor it into the transparency layer on the first image (that's what I'm trying to do anyway).

And then my problem:

I want to move the thing I just pasted in to the right place with respect to the underlying faded map. I attempt to use the move tool, but all I move is the background map (pretty much the opposite of what I want).

Nothing I do seems to let me reselect the pasted-in overlay so that I can move it.

Why I can't ever reposition the pasted in overlay? It should be in the transparency layer I created but even if I select all, I don't seem to be able to move anything other than the background image.

View 2 Replies View Related

GIMP :: How To Use Bevel And Emboss Layer Effect On Image Copied From Another Image

Jul 19, 2013

I'm running Gimp 2.8.4 on Ubuntu 13.04 Linux (64-bit) and I'm trying touse the "Bevel and Emboss" layer effect on an image which I copied fromanother image. Here is what I've done:

1. Loaded image 'A' into Gimp
2. Selected a portion of it
3. Used "/Edit/Copy" to copy the selection
4. Used "/Edit/Paste As/New image" to create a new image from the selection
5. In the new window for the new image, "/FX-Foundry/Layer effects/Bevel and Emboss"
6. When the "Bevel and Emboss" window opens, I accept the defaults and click "Ok"

The filter starts to run and then stops with an error message. Here is the message I get:

------------ START ------------------

Bevel and Emboss Message

Error while executing script-fu-layer-effects-bevel-and-emboss:

Error: ( : 1) Procedure execution of gimp-selection-layer-alpha failed on invalid input arguments: Item 'Pasted Layer copy' (87) cannot be used because it has not been added to an image

----------- END -------------------

View 5 Replies View Related

GIMP :: Ability To Copy / Cut Image Or Part From One Open Image Into Another

Nov 25, 2013

I have been using gimp now for about 2 months and have just upgraded my OS to Mavericks and upgraded Gimp to 2.8.8.

Upon doing this I seem to have lost the ability to copy/cut an image or part thereof from one open image into another... Example:

I have an image window open with a picture a car and I have an image window open with a race track back ground.

I want to copy the car from image 1 into image 2, but for some reason I cannot do this function anymore. When attempting it, once the item is copies to the clipboard and I then swap to the second image, when I paste as a new layer it pastes the clipboard from that image and not the image from the first window...

View 6 Replies View Related

GIMP :: Convert Image To Japanese Manga Style Image

Dec 2, 2012

How to convert an image into a Japanese Manga Comic style image using Gimp? I want to turn a few pictures into pictures like this picture that is attached.

View 3 Replies View Related

GIMP :: Area Image Selection Transfer To Image Map Polygon

Nov 27, 2013

The problem is that if one has defined a selected area in an image, using either selection by color or contiguous selection using the 'magic wand' facility, is possible to copy this selection to the Image Map facility of the image, so as to automatically define a set of coordinates as a polygon that can be used for link purposes? Perhaps there is some interim step that is required, or perhaps a special script is required?

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved